Exploring the Design of Highly Energy Efficient Forestry Cranes using Gravity Compensation

Although most mechanized forestry work relies heavily on cranes for handling logs along the supply chain, there has been little research on how to improve cranes design. In addition, the available research has mainly focused on improving current designs, so there is a lack of application of modern methods for designing cranes with improved efficiency.This paper analyzes how a mechanical engineering design method, known as gravity compensation, can be used to make a new generation of highly energy efficient forestry cranes. To introduce this design approach, a standard forwarder crane with two booms is used as a model system on which to apply gravity compensation concepts. The design methodology follows a procedure based on physics and mathematical optimization, with the objective of minimizing the energy needed to move the crane by using gravity compensation via counterweights. To this end, we considered to minimize mechanical power, because this quantity relates to how fuel and hydraulic fluid are converted into mechanical motion.This analysis suggests that using gravity compensation could reduce energy consumption due to crane work by 27%, at the cost of increasing the crane total mass by 57%. Thus, the original crane mass of 559 kg increases to 879 kg after applying gravity compensation with counterweights. However, overall reductions in energy consumption would depend on both the crane work and the extraction distance. The greater the extraction distance, the lower the total savings. However, energy consumption savings of around 2% could be achieved even with an extraction distance of 1 km.From a design perspective, this study emphasized the need to consider gravity compensation in the design philosophy of forestry cranes, not only for its ability to minimize energy consumption, but also due to all the inherited properties it provides. This initial study concludes that designing cranes with a combination of gravity compensation concepts could yield a new generation of highly energy efficient cranes with energy savings exceeding those reported here

Transport, Growth, Decay and Sorption of Microorganisms and Nutrients through Porous Media: A Simulation with COMSOL

Abstract: Fate of microorganisms in porous media has very important applications in many branches of environmental and petroleum science and engineering, among others; however, concurrently it is a very complex and interacting phenomenon mainly because microorganisms are living. Applying the systematic modeling approach to continuum systems, we derive a model that include net flux of microorganisms and nutrients by convection and dispersion, growth and decay rates of microorganisms, chemotactic movement and nutrient consumption, adsorption of microorganisms and nutrients on rock grain surfaces, as well as desorption of microorganisms. Porosity reduction due to cell adsorption is considered. We use the Solute Transport application of the Earth Science Module in COMSOL Multiphysics to implement a numerical solution of the model. The numerical simulations reproduce results previously reported elsewhere; moreover, we show the spatial-temporal distribution of microorganisms and nutrients along the system and time. We point out the complementary role of the spatial-temporal distribution of components with breakthrough curves to analyze the behavior of both fluent and adsorbed components

Design, rapid manufacturing and modeling of a reduced-scale forwarder crane with closed kinematic chain

Forestry cranes are of paramount importance in forestry operations, so considerable efforts have been carried out to improve their performance in recent years. However, all these efforts have focused on automation technology, leaving aside other alternatives for improvement. Among these alternatives is model-based design, which has the potential to be game-changing for the forest industry. Because research on model-based design is almost non-existent for forestry cranes, there are many gaps that should be filled before presenting improved designs of forestry cranes. The purpose of this article is to fill two of those gaps: (1) the high cost-benefit ratio and safety concerns when testing new designs, components or algorithms in industrial-scale forestry cranes and (2) the dynamic modeling of forestry cranes as mechanical systems with closed kinematic chain. Under these premises, this article first presents a reduced-scale platform resembling a forwarder crane with closed-kinematic chain, where the components of the mechanical structure are manufactured with 3D printing technology, and second, the modeling and experimental validation of the reduced-scale forwarder, where the closed kinematic chain is considered as a system of multiple constrained open kinematic chains. For the experimental validation, a comparison between both experimental and simulation results is presented. Results presented in this article broaden the options to design and test new concepts and/or technology to improve forestry cranes performance

Non equilibrium effects in fragmentation

We study, using molecular dynamics techniques, how boundary conditions affect the process of fragmentation of finite, highly excited, Lennard-Jones systems. We analyze the behavior of the caloric curves (CC), the associated thermal response functions (TRF) and cluster mass distributions for constrained and unconstrained hot drops. It is shown that the resulting CC's for the constrained case differ from the one in the unconstrained case, mainly in the presence of a ``vapor branch''. This branch is absent in the free expanding case even at high energies . This effect is traced to the role played by the collective expansion motion. On the other hand, we found that the recently proposed characteristic features of a first order phase transition taking place in a finite isolated system, i.e. abnormally large kinetic energy fluctuations and a negative branch in the TRF, are present for the constrained (dilute) as well the unconstrained case. The microscopic origin of this behavior is also analyzed.Comment: 21 pages, 11 figure

Acoustically Levitated Whispering-Gallery Mode Microlasers

Acoustic levitation has become a crucial technique for contactless manipulation in several fields, particularly in biological applications. However, its application in the photonics field remains largely unexplored. In this study, we implement an affordable and innovative phased-array levitator that enables stable trapping in the air of micrometer dye-doped droplets, thereby enabling the creation of microlasers. For the first time, this paper presents a detailed performance of the levitated microlaser cavity, supported by theoretical analysis concerning the hybrid technology based on the combination of whispering-gallery modes and acoustic fields. The pressure field distribution inside the acoustic cavity is numerically solved and qualitatively matched with the schlieren deflectometry technique. The optical lasing features of the levitated microlasers are highly comparable with those devices based On-a-Chip registering maximum Q-factors of ~ 105, and minimum lasing thresholds ~ 150 nJ cm−2. The emission comb is explained as a sum of multiple individual-supported whispering-gallery modes. The use of novel touchless micrometric lasers, produced with an acoustic levitator brings new technological opportunities based on photonic-acoustic technological platforms

Seroprevalence and risk factors associated with bovine herpesvirus 1 in dairy herds of Colombia

BACKGROUND AND AIM: Infectious bovine rhinotracheitis (IBR) is an infectious disease widely distributed globally and is considered the main cause of various reproductive and respiratory tract diseases in cattle and buffaloes. This study aimed to estimate seroprevalence and determine risk factors associated with the presentation of IBR in the municipality of Sotaquirá, Boyacá (Colombia). MATERIALS AND METHODS: A descriptive cross-sectional study with simple random sampling was performed, and the sample size was 1,000 cattle. Blood samples were obtained by coccygeal venipuncture and processed through indirect enzyme-linked immunosorbent assay using the Synbiotics(®) kit (Zoetis, New Jersey, USA) with a sensitivity and specificity of 96% and 98%, respectively. Data were processed using the statistical program EpiInfo(®) (Centers for Disease Control and Prevention; Atlanta, Georgia). RESULTS: A high seroprevalence of 57.5% was established. Seroprevalence was the highest in cattle >4 years of age (65.0% apparent seroprevalence [AS]; 67% true seroprevalence [TS]) and in the Holstein breed (65.5% AS; 67.8% TS). The breed and age of the animals were significantly associated with each other. The Holstein breed, age group >4 years, uncertified semen, and fetal death were established as risk factors for IBR. In comparison, the age groups of <1 and 1–2 years and the Normande breed were established as protective factors against the bovine herpesvirus-1 virus. CONCLUSION: Management factors, such as livestock from other owners and animal purchases, which affect disease presentation, are evident. The implementation and development of novel prevention and control measures for IBR at the national level are necessary

Obesogenic Lifestyle and Its Influence on Adiposity in Children and Adolescents, Evidence from Mexico

Overweight (OW) and obesity (OB) during childhood/adolescence are major public health problems in Mexico. Several obesogenic lifestyle (OL) risk factors have been identified, but the burden and consequences of them in Mexican children/adolescents remain unclear. The objective of this study was to estimate the prevalence of OL components and describe their relationships with adiposity, and OW/OB. A population-based cross-sectional study of Mexican children/adolescents with nutritional assessment, data collection on daily habits and adiposity as fat-mass index (FMI) by dual-energy X-ray absorptiometry was performed. Individual OL-components: "inactivity," "excessive screen time," "insufficient sleep," "unhealthy-diet", were defined according to non-adherence to previously published healthy recommendations. RESULTS: 1449 subjects were assessed between March 2015 to April 2018. Sixteen percent of subjects had all four OL-components, 40% had three, 35% had two, 9% had one, and 0.5% had none. A cumulative OL score showed a significant dose-response effect with FMI. The combination of inactivity, excessive screen time, and insufficient sleep showed the highest risk association to OW/OB and higher values of FMI. CONCLUSIONS: The prevalence of OL-components was extremely high and associated with increased adiposity and OW/OB. Several interventions are needed to revert this major public health threat

Urinary cyclophilin A as marker of tubular cell death and kidney injury

Background: Despite the term acute kidney injury (AKI), clinical biomarkers for AKI re-flect function rather than injury and independent markers of injury are needed. Tubular cell death, including necroptotic cell death, is a key feature of AKI. Cyclophilin A (CypA) is an intracellular protein that has been reported to be released during necroptosis. We have now explored CypA as a potential marker for kidney injury in cultured tubular cells and in clinical settings of ischemia-reperfusion injury (IRI), characterized by limitations of current diagnostic criteria for AKI. Meth-ods: CypA was analyzed in cultured human and murine proximal tubular epithelial cells exposed to chemical hypoxia, hypoxia/reoxygenation (H/R) or other cell death (apoptosis, necroptosis, fer-roptosis) inducers. Urinary levels of CypA (uCypA) were analyzed in patients after nephron sparing surgery (NSS) in which the contralateral kidney is not disturbed and kidney grafts with initial function. Results: Intracellular CypA remained unchanged while supernatant CypA increased in parallel to cell death induction. uCypA levels were higher in NSS patients with renal artery clamping (that is, with NSS-IRI) than in no clamping (NSS-no IRI), and in kidney transplantation (KT) recipients (KT-IRI) even in the presence of preserved or improving kidney function, while this was not the case for urinary Neutrophil gelatinase-associated lipocalin (NGAL). Furthermore, higher uCypA levels in NSS patients were associated with longer surgery duration and the incidence of AKI increased from 10% when using serum creatinine (sCr) or urinary output criteria to 36% when using high uCypA levels in NNS clamping patients. Conclusions: CypA is released by kidney tubular cells during different forms of cell death, and uCypA increased during IRI-induced clinical kidney injury independently from kidney function parameters. Thus, uCypA is a potential bi-omarker of kidney injury, which is independent from decreased kidney functionResearch by the authors was funded by FIS/ FEDER funds (PI17/00257, PI18/01386, PI19/00588, PI19/00815, DTS18/00032, ERA-PerMed-JTC2018 (KIDNEY ATTACK AC18/00064 and PERSTIGAN AC18/00071, ISCIII-RETIC REDinREN RD016/0009), Sociedad Española de Nefrología, FRIAT, Comunidad de Madrid en Biomedicina B2017/BMD-3686 CIFRA2-CM. Salary support: ISCIII Miguel Servet to A.B.S., MICIN Ramon y Cajal to M.D.S.-N., REDinREN RD016/0009 to M.F.-B.,SENEFRO to D.M.-S. and Consejería de Educación, Juventud y Deporte (Comunidad de Madrid/FSE) to A.M.L.-