Closing the gap between business undergraduate education and the organisational environment: A Chilean case study applying experiential learning theory

In response to the continuous changes in Latin American higher education and the increasing demands for better prepared professionals, the Learning Connected to the Organisational Environment method was introduced in the course of Marketing at one public University in Chile. This was aimed as an integrated approach to education, providing pedagogical and social value by connecting organisations and real challenges with the learning objectives. This paper describes its design, implementation and initial impact on students’ learning process. Results on the impact of the LCOE method show that students valued learning with this new initiative (n = 158) and showed higher performance and improved quality of their written reports, along with higher evaluations of the teaching staff compared to students in the same course learning with traditional methods (n = 158). Discussion is centred on the value of this initiative and on suggestions for transference and future research

La importancia de la educación interprofesional en la enseñanza de la odontología: una revisión sistemática exploratoria analizando el dónde, el porqué y el cómo

En años recientes, la educación interprofesional ha aumentado su popularidad en la formación de odontólogos con el fin de facilitar la colaboración entre los miembros del equipo de salud y mejorar la calidad en la atención profesional. Por consiguiente, el propósito de este estudio es describir y analizar dónde, por qué y cómo se está realizando la educación interprofesional en la enseñanza de la odontología. Se realizó una revisión sistemática exploratoria a través de la búsqueda en diversas bases de datos, revistas relevantes, y literatura gris. Posteriormente se llevó a cabo un análisis temático para sintetizar la información. Treinta artículos fueron seleccionados, en su mayoría realizados en contextos norteamericanos y europeos, y en conjunto principalmente con estudiantes de medicina, enfermería y farmacia. La principal justificación para incorporar este tipo de enseñanza fue la necesidad de fomentar y valorar el trabajo en equipo para responder a las necesidades de salud de la actual población. El aprendizaje en equipos, la resolución de problemas, y el método de casos fueron las estrategias comúnmente empleadas, reportándose cambios positivos en habilidades de comunicación y colaboración entre los estudiantes. La discusión se centra en los beneficios y recomendaciones al planificar instancias de educación interprofesional en la enseñanza de la odontología

Students' and tutors' perceptions of a deliberate simulated practice protocol using patient-specific virtual and 3D-printed teeth models: A pilot study

Objective: This pilot study aimed to investigate the perceptions of dental students and their tutors of a deliberate simulated practice using patient-specific virtual and three-dimensional (3D) printed teeth models. This is before they perform their first indirect posterior tooth restoration on their patients. Methods: Seventy-eight fourth-year dental students from the 2021 Comprehensive Clinic I course at the University of the Andes, Chile, were invited to participate in a deliberate practice protocol. This consisted of digitally scanning their patients’ teeth, printing the files three-dimensionally, and loading them into a virtual reality (VR) dental simulator to create patient-specific models. Subsequently, they practiced the same indirect posterior restorations on these models before performing them on their actual patients. Perceptions about students’ preparedness to perform tooth preparations before and after the protocol were collected from students and their tutors through surveys. Results: Sixty-three students (43 female) and six clinical tutors (all male) participated in the study. Before practicing with their patient-specific models, most students believed they had the knowledge, practical skills, and self-confidence to perform indirect restorations on their patients. However, after the protocol, most students thought their self-confidence increased and felt better prepared to treat their patients. Most students preferred the 3D-printed models over the VR models to practice but mentioned that it did not feel like drilling dental enamel. Tutors believed that participating students had higher self-confidence when treating their patients and were more autonomous. Conclusions: This study demonstrated that students and clinical tutors had positive perceptions of practicing with patient-specific virtual and 3D-printed teeth models before students performed their first indirect restorations on their patients

Comparison of digitally assessed quality of posterior crown preparations with and without previous practice on patient-specific 3D printed teeth models

INTRODUCTION: 3D-printing technology can provide customizable simulations, but its effects on patient care quality have not been well studied. This study aimed to assess the impact of practicing with patient-specific 3D-printed teeth models on the quality of 'patients' dental preparations performed by students transitioning to clinical training. Accordingly, the quality of posterior crown preparations was evaluated by objectively analyzing digital scans and grades in two groups: the study group, which practiced beforehand with patient-specific 3D-printed teeth models, and the control group, which did not practice with these models. METHODS: All seventy-eight fourth-year dental students who had just finished their fixed prosthodontics course at the simulation laboratory with training on phantom heads and without previous clinical experience in crown preparations were invited to participate in the study. sixty-eight agreed to take part and were randomly divided into a study group that practiced crown preparations on 3D-printed models of their own 'patient's teeth and a control group that did not practice with 3D-printed models and started their clinical work straightforward after simulation training. Students completed validated perception questionnaires on self-confidence and clinical skills before and after the protocol, which were compared using a chi-squared test. Crown preparations performed on 3D-printed models and then on patients were digitally scanned and objectively graded by prepCheck® software for critical parameters, such as undercuts, taper, and occlusion reduction. Non-parametric tests were used to compare preparations on 3D-printed models and on patients performed by the study group and those on patients made by the control group. RESULTS: Initially, both groups reported similar perceptions of self-confidence and clinical skills levels. The study group significantly improved both aspects after the protocol. Analysis of the scanned preparations demonstrated that the study group removed less tooth structure from actual patients than from the initial 3D-printed models. In contrast, the control group showed excess occlusal clearance in their patients compared to the study group. CONCLUSIONS: Practicing patient-specific 3D-printed teeth before performing procedures clinically appears to enhance preparation quality and minimize unnecessary tooth reduction in early clinical experiences

I. Psychologie générale. Traités

Andrieux C., Bacher F., Bresson F., Durandin G., Ehrlich Stéphane, Faverge Jean-Marie, Florès César, Guerdet A.-M., Jampolsky P., Lambert Roger, Oléron Geneviève, Oléron Pierre, Orsini F., Piéron Henri, Rausch de Traubenberg N., Valin E. I. Psychologie générale. Traités. In: L'année psychologique. 1957 vol. 57, n°2. pp. 555-573

NEOTROPICAL CARNIVORES: a data set on carnivore distribution in the Neotropics

Mammalian carnivores are considered a key group in maintaining ecological health and can indicate potential ecological integrity in landscapes where they occur. Carnivores also hold high conservation value and their habitat requirements can guide management and conservation plans. The order Carnivora has 84 species from 8 families in the Neotropical region: Canidae; Felidae; Mephitidae; Mustelidae; Otariidae; Phocidae; Procyonidae; and Ursidae. Herein, we include published and unpublished data on native terrestrial Neotropical carnivores (Canidae; Felidae; Mephitidae; Mustelidae; Procyonidae; and Ursidae). NEOTROPICAL CARNIVORES is a publicly available data set that includes 99,605 data entries from 35,511 unique georeferenced coordinates. Detection/non-detection and quantitative data were obtained from 1818 to 2018 by researchers, governmental agencies, non-governmental organizations, and private consultants. Data were collected using several methods including camera trapping, museum collections, roadkill, line transect, and opportunistic records. Literature (peer-reviewed and grey literature) from Portuguese, Spanish and English were incorporated in this compilation. Most of the data set consists of detection data entries (n = 79,343; 79.7%) but also includes non-detection data (n = 20,262; 20.3%). Of those, 43.3% also include count data (n = 43,151). The information available in NEOTROPICAL CARNIVORES will contribute to macroecological, ecological, and conservation questions in multiple spatio-temporal perspectives. As carnivores play key roles in trophic interactions, a better understanding of their distribution and habitat requirements are essential to establish conservation management plans and safeguard the future ecological health of Neotropical ecosystems. Our data paper, combined with other large-scale data sets, has great potential to clarify species distribution and related ecological processes within the Neotropics. There are no copyright restrictions and no restriction for using data from this data paper, as long as the data paper is cited as the source of the information used. We also request that users inform us of how they intend to use the data

NEOTROPICAL ALIEN MAMMALS: a data set of occurrence and abundance of alien mammals in the Neotropics

Biological invasion is one of the main threats to native biodiversity. For a species to become invasive, it must be voluntarily or involuntarily introduced by humans into a nonnative habitat. Mammals were among first taxa to be introduced worldwide for game, meat, and labor, yet the number of species introduced in the Neotropics remains unknown. In this data set, we make available occurrence and abundance data on mammal species that (1) transposed a geographical barrier and (2) were voluntarily or involuntarily introduced by humans into the Neotropics. Our data set is composed of 73,738 historical and current georeferenced records on alien mammal species of which around 96% correspond to occurrence data on 77 species belonging to eight orders and 26 families. Data cover 26 continental countries in the Neotropics, ranging from Mexico and its frontier regions (southern Florida and coastal-central Florida in the southeast United States) to Argentina, Paraguay, Chile, and Uruguay, and the 13 countries of Caribbean islands. Our data set also includes neotropical species (e.g., Callithrix sp., Myocastor coypus, Nasua nasua) considered alien in particular areas of Neotropics. The most numerous species in terms of records are from Bos sp. (n = 37,782), Sus scrofa (n = 6,730), and Canis familiaris (n = 10,084); 17 species were represented by only one record (e.g., Syncerus caffer, Cervus timorensis, Cervus unicolor, Canis latrans). Primates have the highest number of species in the data set (n = 20 species), partly because of uncertainties regarding taxonomic identification of the genera Callithrix, which includes the species Callithrix aurita, Callithrix flaviceps, Callithrix geoffroyi, Callithrix jacchus, Callithrix kuhlii, Callithrix penicillata, and their hybrids. This unique data set will be a valuable source of information on invasion risk assessments, biodiversity redistribution and conservation-related research. There are no copyright restrictions. Please cite this data paper when using the data in publications. We also request that researchers and teachers inform us on how they are using the data

Search for long-lived particles decaying to a pair of muons in proton-proton collisions at s \sqrt{s} = 13 TeV

An inclusive search for long-lived exotic particles decaying to a pair of muons is presented. The search uses data collected by the CMS experiment at the CERN LHC in proton-proton collisions at $\sqrt{s}$ = 13 TeV in 2016 and 2018 and corresponding to an integrated luminosity of 97.6 fb$^{−1}$. The experimental signature is a pair of oppositely charged muons originating from a common secondary vertex spatially separated from the pp interaction point by distances ranging from several hundred μm to several meters. The results are interpreted in the frameworks of the hidden Abelian Higgs model, in which the Higgs boson decays to a pair of long-lived dark photons Z$_{D}$, and of a simplified model, in which long-lived particles are produced in decays of an exotic heavy neutral scalar boson. For the hidden Abelian Higgs model with m(Z$_{D}$) greater than 20 GeV and less than half the mass of the Higgs boson, they provide the best limits to date on the branching fraction of the Higgs boson to dark photons for cτ(Z$_{D}$) (varying with m(Z$_{D}$)) between 0.03 and ≈0.5 mm, and above ≈0.5 m. Our results also yield the best constraints on long-lived particles with masses larger than 10 GeV produced in decays of an exotic scalar boson heavier than the Higgs boson and decaying to a pair of muons.[graphic not available: see fulltext

Search for pair production of vector-like quarks in leptonic final states in proton-proton collisions at s \sqrt{s} = 13 TeV

A search is presented for vector-like T and B quark-antiquark pairs produced in proton-proton collisions at a center-of-mass energy of 13 TeV. Data were collected by the CMS experiment at the CERN LHC in 2016–2018, with an integrated luminosity of 138 fb$^{−1}$. Events are separated into single-lepton, same-sign charge dilepton, and multi-lepton channels. In the analysis of the single-lepton channel a multilayer neural network and jet identification techniques are employed to select signal events, while the same-sign dilepton and multilepton channels rely on the high-energy signature of the signal to distinguish it from standard model backgrounds. The data are consistent with standard model background predictions, and the production of vector-like quark pairs is excluded at 95% confidence level for T quark masses up to 1.54 TeV and B quark masses up to 1.56 TeV, depending on the branching fractions assumed, with maximal sensitivity to decay modes that include multiple top quarks. The limits obtained in this search are the strongest limits to date for $\textrm{T}\overline{\textrm{T}}$ production, excluding masses below 1.48 TeV for all decays to third generation quarks, and are the strongest limits to date for $\textrm{B}\overline{\textrm{B}}$ production with B quark decays to tW.[graphic not available: see fulltext