1,084 research outputs found
Mitigating Sensor and Acquisition Method-Dependence of Fingerprint Presentation Attack Detection Systems by Exploiting Data from Multiple Devices
The problem of interoperability is still open in fingerprint presentation attack detection (PAD) systems. This involves costs for designers and manufacturers who intend to change sensors of personal recognition systems or design multi-sensor systems, because they need to obtain sensor-specific spoofs and retrain the system. The solutions proposed in the state of the art to mitigate the problem still require data from the target sensor and are therefore not exempt from the problem of obtaining new data. In this paper, we provide insights for the design of PAD systems thanks to an overview of an interoperability analysis on modern systems: hand-crafted, deep-learning-based, and hybrid. We investigated realistic use cases to determine the pros and cons of training with data from multiple sensors compared to training with single sensor data, and drafted the main guidelines to follow for deciding the most convenient PAD design technique depending on the intended use of the fingerprint identification/authentication system
Fingerprint Adversarial Presentation Attack in the Physical Domain
With the advent of the deep learning era, Fingerprint-based Authentication Systems (FAS) equipped with Fingerprint Presentation Attack Detection (FPAD) modules managed to avoid attacks on the sensor through artificial replicas of fingerprints. Previous works highlighted the vulnerability of FPADs to digital adversarial attacks. However, in a realistic scenario, the attackers may not have the possibility to directly feed a digitally perturbed image to the deep learning based FPAD, since the channel between the sensor and the FPAD is usually protected. In this paper we thus investigate the threat level associated with adversarial attacks against FPADs in the physical domain. By materially realising fakes from the adversarial images we were able to insert them into the system directly from the “exposed” part, the sensor. To the best of our knowledge, this represents the first proof-of-concept of a fingerprint adversarial presentation attack. We evaluated how much liveness score changed by feeding the system with the attacks using digital and printed adversarial images. To measure what portion of this increase is due to the printing itself, we also re-printed the original spoof images, without injecting any perturbation. Experiments conducted on the LivDet 2015 dataset demonstrate that the printed adversarial images achieve ∼ 100% attack success rate against an FPAD if the attacker has the ability to make multiple attacks on the sensor (10) and a fairly good result (∼ 28%) in a one-shot scenario. Despite this work must be considered as a proof-of-concept, it constitutes a promising pioneering attempt confirming that an adversarial presentation attack is feasible and dangerous
Recent advances on innovative bioactive glass-hydroxyapatite composites for bone tissue applications: Processing, mechanical properties, and biological performance
New Hydroxyapatite-Bioactive Glass composites, xHA-(1-x)BG (x = 25, 50, and 75 wt %), are developed using HA and BGMS10 glass powders co-milled up to 2 h prior to Spark Plasma Sintering (SPS). Ball milling (BM) promoted the consolidation of HA-rich powders, whereas hindered the densification of 25HA-75BG samples. HA crystallite size is reduced from > 200 nm (unmilled) to 60 (x = 25 %) or 88 nm (x = 75 %) when using 2 h milled mixtures. Glass crystallization occurred in 75HA-25BG samples processed by SPS at 950 °C: a negligeable effect in the amount of the residual amorphous phase (12.3–13.3 wt %) is produced by BM, while changes are observed in the relative content of crystalline phases, with SiO2 increases from 8.5 to 13.1 wt %, whereas α- and β-CaSiO3 correspondingly decrease. Superior Young's modulus and Vickers hardness (130 GPa and 726, respectively) are obtained in HA rich products. Biological tests evidenced that the milling treatment does not determine negative consequences on cells viability
Machine learning approach using MLP and SVM algorithms for the fault prediction of a centrifugal pump in the oil and gas industry
The demand for cost-effective, reliable and safe machinery operation requires accurate fault detection and classification to achieve an efficient maintenance strategy and increase performance. Furthermore, in strategic sectors such as the oil and gas industry, fault prediction plays a key role to extend component lifetime and reduce unplanned equipment thus preventing costly breakdowns and plant shutdowns. This paper presents the preliminary development of a simple and easy to implement machine learning (ML) model for early fault prediction of a centrifugal pump in the oil and gas industry. The data analysis is based on real-life historical data from process and equipment sensors mounted on the selected machinery. The raw sensor data, mainly from temperature, pressure and vibrations probes, are denoised, pre-processed and successively coded to train the model. To validate the learning capabilities of the ML model, two different algorithms-the Support Vector Machine (SVM) and the Multilayer Perceptron (MLP)-are implemented in KNIME platform. Based on these algorithms, potential faults are successfully recognized and classified ensuring good prediction accuracy. Indeed, results from this preliminary work show that the model allows us to properly detect the trends of system deviations from normal operation behavior and generate fault prediction alerts as a maintenance decision support system for operatives, aiming at avoiding possible incoming failures
Combustion synthesis and spark plasma sintering of apatite-tricalcium phosphate nanocomposites
A processing route consisting of Spark Plasma Sintering (SPS) of precursor powders prepared by Solution Combustion Synthesis (SCS) is proposed for the first time for the fabrication of bulk nanostructured biphasic calcium phosphates. The apatite phase content in the product obtained by SCS was maximized using a fuel to oxidizer ratio of 1.1. After a post-synthesis air-annealing step conducted a 700 °C/3 h, powders consisted of 83 wt.% of carbonated apatite, with average crystallite size less than 70 nm, and β- and α-TCP (tricalcium phosphate), as secondary phases. Detailed structural analyses evidenced that the original nanostructure was retained after sintering at 900 °C, with the obtainment of nearly 91% dense, apatite-rich, biphasic bioceramics, with grains size of about 100 nm. The developed nanostructured biphasic material is expected to possess a higher resorption rate than standard microcrystalline hydroxyapatite, which makes it preferable for bone tissue regeneration
Fabrication and Characterization of Quinary High Entropy-Ultra-High Temperature Diborides” Ceramics
Due to their inherently chemical complexity and their refractory nature, the obtainment of highly dense and single-phase High Entropy (HE) diborides represents a very hard target to achieve. In this framework, homogeneous (Hf0.2Nb0.2Ta0.2Mo0.2Ti0.2)B2, (Hf0.2Zr0.2Ta0.2Mo0.2Ti0.2)B2, and (Hf0.2Zr0.2Nb0.2Mo0.2Ti0.2)B2 ceramics with high relative densities (97.4, 96.5 and 98.2 %, respectively) are successfully produced by Spark Plasma Sintering (SPS) using powders prepared by Self-propagating High-temperature Synthesis (SHS). Although the latter technique does not lead to the complete conversion of initial precursors into the prescribed HE phases, such goal is fully reached after SPS (1950°C/20min/20 MPa). The three HE products show similar, even better in some cases, mechanical properties compared to ceramics with the same nominal composition attained using alternative processing methods. Superior Vickers hardness and elastic modulus values are found for the (Hf0.2Nb0.2Ta0.2Mo0.2Ti0.2)B2 and (Hf0.2Zr0.2Ta0.2Mo0.2Ti0.2)B2 systems, i.e. 28.1 GPa/538.5 GPa and 28.08 GPa/498.1 GPa, respectively, in spite of the correspondingly higher residual po-rosities (1.2 and 2.2 vol.%, respectively). In contrast, the third ceramic, not containing Tantalum, displays lower values of these two properties (25.1 GPa/404.5 GPa). However, the corresponding fracture toughness (8.84 MPa m1/2) is relatively higher. This fact can be likely ascribed to the smaller residual porosity (0.3 vol.%) of the sintered material
Submarine Geomorphology of the Southwestern Sardinian Continental Shelf (Mediterranean Sea): Insights into the Last Glacial Maximum Sea-Level Changes and Related Environments
During the lowstand sea-level phase of the Last Glacial Maximum (LGM), a large part of the current Mediterranean continental shelf emerged. Erosional and depositional processes shaped the coastal strips, while inland areas were affected by aeolian and fluvial processes. Evidence of both the lowstand phase and the subsequent phases of eustatic sea level rise can be observed on the continental shelf of Sardinia (Italy), including submerged palaeo-shorelines and landforms, and indicators of relict coastal palaeo-environments. This paper shows the results of a high-resolution survey on the continental shelf off San Pietro Island (southwestern Sardinia). Multisensor and multiscale data\u2014obtained by means of seismic sparker, sub-bottom profiler chirp, multibeam, side scan sonar, diving, and uncrewed aerial vehicles\u2014made it possible to reconstruct the morphological features shaped during the LGM at depths between 125 and 135 m. In particular, tectonic controlled palaeo-cliffs affected by landslides, the mouth of a deep palaeo-valley fossilized by marine sediments and a palaeo-lagoon containing a peri-littoral thanatocenosis (18,983 \ub1 268 cal BP) were detected. The Younger Dryas palaeo-shorelines were reconstructed, highlighted by a very well preserved beachrock. The coastal paleo-landscape with lagoon-barrier systems and retro-littoral dunes frequented by the Mesolithic populations was reconstructed
Mouthwash based on ozonated olive oil in caries prevention: a preliminary in-vitro study
(1) Background: Ozone (O3) proved to oxidize organic and inorganic compounds, and its efficacy against bacteria, viruses and fungi plasma membranes was of interest. Ozone vehicle can be a gaseous form, ozonated water or ozonized oil. The aim of this in-vitro study was to evaluate the efficacy of ozonated olive oil against Streptococcus mutans. (2) Methods: Two different commercial mouthwashes were tested: Ialozon Blu (IB) (Gemavip, Cagliari, Italy), with ozonated olive oil, and Ialozon Rose (IR) (Gemavip, Cagliari, Italy), with ozonated olive oil, hyaluronic acid and vitamin E. All formulates were analyzed in a dilution range from 2-to 256-folds in saline solution, as to reproduce the salivary dilution. Streptococcus mutans CIP103220 strain was used for the antimicrobial susceptibility test, and the Kirby–Bauer inhibition method was performed to evaluate the Minimum Inhibitory (MIC), Minimum Bactericidal (MBC), and Minimum Biofilm Inhibitory Concentration (MBIC). (3) Results: Both formulates showed the same antimicrobial activity. MIC, MBC, and MBIC were observed for dilution factors of 1/32, 1/8 and 1/8, respectively. The mean value of inhibition zone diameter was 16.5 mm for IB, and 18 mm for IR. (4) Conclusions: The results suggested that ozonized olive oil formulates were able to inactivate Streptococcus mutans avoiding the salivary dilution effect in the oral cavity
Base Metal Catalyzed Isocyanide Insertions
Isocyanides are diverse C1 building blocks considering their potential to react with nucleophiles, electrophiles, and radicals. Therefore, perhaps not surprisingly, isocyanides are highly valuable as inputs for multicomponent reactions (MCRs) and other one-pot cascade processes. In the field of organometallic chemistry, isocyanides typically serve as ligands for transition metals. The coordination of isocyanides to metal centers alters the electronic distribution of the isocyano moiety, and reaction pathways can therefore be accessed that are not possible in the absence of the metal. The tunable reactivity of the isocyanide functional group by transition metals has evolved into numerous useful applications. Especially palladium-catalyzed isocyanide insertion processes have emerged as powerful reactions in the past decade. However, reports on the use of earth-abundant and cheap base metals in these types of transformations are scarce and have received far less attention. In this Minireview, we focus on these emerging base metal catalyzed reactions and highlight their potential in synthetic organic chemistry. Although mechanistic studies are still scarce, we discuss distinct proposed catalytic cycles and categorize the literature according to 1) the (hetero)atom bound to and 2) the type of bonding with the transition metal in which the (formal) insertion occurs
The spectral structure and energetics of powerful radio sources
J. J. Harwood, M J. Hardcastle, J. H. Croston, A. Stroe, R. Morganti, and E. Orru, 'The spectral structure and energetics of powerful radio sources', paper presented at The Metre Wavelength Sky: Celebrating 50 years of Radio Astronomy at TIFR and 10 years of GMRT. Pune, India, 9-13 December 2013Determining the energy spectrum of an electron population can give key insights into the underlying physics of a radio source; however, the lack of high resolution, broad-bandwidth observations has left many ambiguities in our understanding of radio galaxies. The improved capabilities of telescopes such as the JVLA and LOFAR mean that within the bandwidth of any given observation, a detailed spectral shape can now be produced. We present recent investigations of powerful FR-II radio galaxies at GHz and MHz frequencies and show for the first time their small-scale spectral structure. We highlight problems in traditional methods of analysis and demonstrate how these issues can now be addressed. We present the latest results from low frequency studies which suggest a potential increase in the total energy content of radio galaxy lobes with possible implications for the energetics of the population as a whole.Peer reviewe
- …