29,614 research outputs found

    Local and global instabilities of flow in a flexible-walled channel

    Get PDF
    We consider laminar high-Reynolds-number flow through a long finite-length planar channel, where a segment of one wall is replaced by a massless membrane held under longitudinal tension. The flow is driven by a fixed pressure difference across the channel and is described using an integral form of the unsteady boundary-layer equations. The basic flow state, for which the channel has uniform width, exhibits static and oscillatory global instabilities, having distinct modal forms. In contrast, the corresponding local problem (neglecting boundary conditions associated with the rigid parts of the system) is found to be convectively, but not absolutely, unstable to small-amplitude disturbances in the absence of wall damping. We show how amplification of the primary global oscillatory instability can arise entirely from wave reflections with the rigid parts of the system, involving interacting travelling wave flutter and static-divergence modes that are convectively stable; alteration of the mean flow by oscillations makes the onset of this primary instability subcritical. We also show how distinct mechanisms of energy transfer differentiate the primary global mode from other modes of oscillatory instability

    Nonuniqueness in a minimal model for cell motility

    Get PDF
    Two–phase flow models have been used previously to model cell motility, however these have rapidly become very complicated, including many physical processes, and are opaque. Here we demonstrate that even the simplest one–dimensional, two–phase, poroviscous, reactive flow model displays a number of behaviours relevant to cell crawling. We present stability analyses that show that an asymmetric perturbation is required to cause a spatially uniform, stationary strip of cytoplasm to move, which is relevant to cell polarization. Our numerical simulations identify qualitatively distinct families of travelling–wave solution that co–exist at certain parameter values. Within each family, the crawling speed of the strip has a bell–shaped dependence on the adhesion strength. The model captures the experimentally observed behaviour that cells crawl quickest at intermediate adhesion strengths, when the substrate is neither too sticky nor too slippy

    Bayesian methods of astronomical source extraction

    Get PDF
    We present two new source extraction methods, based on Bayesian model selection and using the Bayesian Information Criterion (BIC). The first is a source detection filter, able to simultaneously detect point sources and estimate the image background. The second is an advanced photometry technique, which measures the flux, position (to sub-pixel accuracy), local background and point spread function. We apply the source detection filter to simulated Herschel-SPIRE data and show the filter's ability to both detect point sources and also simultaneously estimate the image background. We use the photometry method to analyse a simple simulated image containing a source of unknown flux, position and point spread function; we not only accurately measure these parameters, but also determine their uncertainties (using Markov-Chain Monte Carlo sampling). The method also characterises the nature of the source (distinguishing between a point source and extended source). We demonstrate the effect of including additional prior knowledge. Prior knowledge of the point spread function increase the precision of the flux measurement, while prior knowledge of the background has onlya small impact. In the presence of higher noise levels, we show that prior positional knowledge (such as might arise from a strong detection in another waveband) allows us to accurately measure the source flux even when the source is too faint to be detected directly. These methods are incorporated in SUSSEXtractor, the source extraction pipeline for the forthcoming Akari FIS far-infrared all-sky survey. They are also implemented in a stand-alone, beta-version public tool that can be obtained at http://astronomy.sussex.ac.uk/∼\simrss23/sourceMiner\_v0.1.2.0.tar.gzComment: Accepted for publication by ApJ (this version compiled used emulateapj.cls

    Three-Dimensional Propagation of Magnetohydrodynamic Waves in Solar Coronal Arcades

    Full text link
    We numerically investigate the excitation and temporal evolution of oscillations in a two-dimensional coronal arcade by including the three-dimensional propagation of perturbations. The time evolution of impulsively generated perturbations is studied by solving the linear, ideal magnetohydrodynamic (MHD) equations in the zero-beta approximation. As we neglect gas pressure the slow mode is absent and therefore only coupled MHD fast and Alfven modes remain. Two types of numerical experiments are performed. First, the resonant wave energy transfer between a fast normal mode of the system and local Alfven waves is analyzed. It is seen how, because of resonant coupling, the fast wave with global character transfers its energy to Alfvenic oscillations localized around a particular magnetic surface within the arcade, thus producing the damping of the initial fast MHD mode. Second, the time evolution of a localized impulsive excitation, trying to mimic a nearby coronal disturbance, is considered. In this case, the generated fast wavefront leaves its energy on several magnetic surfaces within the arcade. The system is therefore able to trap energy in the form of Alfvenic oscillations, even in the absence of a density enhancement such as that of a coronal loop. These local oscillations are subsequently phase-mixed to smaller spatial scales. The amount of wave energy trapped by the system via wave energy conversion strongly depends on the wavelength of perturbations in the perpendicular direction, but is almost independent from the ratio of the magnetic to density scale heights.Comment: 27 pages, 11 figure

    A systematic policy review of early childhood development and peacebuilding in fourteen conflict-affected and post-conflict countries: final report

    Get PDF
    This report presents the findings of a systematic review of early childhood development (ECD) and peacebuilding policies across 14conflict-affected and post-conflict countries. The study sought to map existing national-level policies covering a range of crosssectors: ECD, peacebuilding and social welfare policies. Overall, the findings show ‘policy gaps’ across all 14 countries in the recognition of the importance of early childhood development. There are also limited linkages in the policy discourses between early childhood development and peacebuilding. Yet, there is some empirical and policy evidence which show the effectiveness of early childhood development and education in promoting positive changes in young children’s lives and their potential contributions to social cohesion and reconciliation in conflict-affected states. The review shows compelling reasons for increased prioritisation of the early years and ECD in policy development in the promotion of peacebuilding

    Chemical mechanical polishing of thin film diamond

    Get PDF
    The demonstration that Nanocrystalline Diamond (NCD) can retain the superior Young's modulus (1,100 GPa) of single crystal diamond twinned with its ability to be grown at low temperatures (<450 {\deg}C) has driven a revival into the growth and applications of NCD thin films. However, owing to the competitive growth of crystals the resulting film has a roughness that evolves with film thickness, preventing NCD films from reaching their full potential in devices where a smooth film is required. To reduce this roughness, films have been polished using Chemical Mechanical Polishing (CMP). A Logitech Tribo CMP tool equipped with a polyurethane/polyester polishing cloth and an alkaline colloidal silica polishing fluid has been used to polish NCD films. The resulting films have been characterised with Atomic Force Microscopy, Scanning Electron Microscopy and X-ray Photoelectron Spectroscopy. Root mean square roughness values have been reduced from 18.3 nm to 1.7 nm over 25 {\mu}m2^2, with roughness values as low as 0.42 nm over ~ 0.25 {\mu}m2^2. A polishing mechanism of wet oxidation of the surface, attachment of silica particles and subsequent shearing away of carbon has also been proposed.Comment: 6 pages, 6 figure

    The Influence of Signaling Conspecific and Heterospecific Neighbors on Eavesdropper Pressure

    Get PDF
    The study of tradeoffs between the attraction of mates and the attraction of eavesdropping predators and parasites has generally focused on a single species of prey, signaling in isolation. In nature, however, animals often signal from mixed-species aggregations, where interactions with heterospecific group members may be an important mechanism modulating tradeoffs between sexual and natural selection, and thus driving signal evolution. Although studies have shown that conspecific signalers can influence eavesdropper pressure on mating signals, the effects of signaling heterospecifics on eavesdropper pressure, and on the balance between natural and sexual selection, are likely to be different. Here, we review the role of neighboring signalers in mediating changes in eavesdropper pressure, and present a simple model that explores how selection imposed by eavesdropping enemies varies as a function of a signaling aggregation\u27s species composition, the attractiveness of aggregation members to eavesdroppers, and the eavesdroppers\u27 preferences for different member types. This approach can be used to model mixed-species signaling aggregations, as well as same-species aggregations, including those with non-signaling individuals, such as satellites or females. We discuss the implications of our model for the evolution of signal structure, signaling behavior, mixed-species aggregations, and community dynamics
    • …
    corecore