Entrepreneurial Education:Solution to Unemployment and Under Employment

To curb the menace of unemployment among youths especially graduates of higher institutions due largely to over dependence on white colar job as the only means of employment, the Federal Government of Nigeria introduced the entrepreneurialship education as a compulsory course which if effectively taught and learnt, will make them find jobs easily but most importantly, to enable them create it themselves and become employers of labour.  This paper examines the concepts of entrepreneurial education as well as employment.  It proceeds to discuss some of the implications of entrepreneurial education on employment.   The study utilized the secondary source of data generation to source data for the paper and relied extensively on previous study coupled with observations by the authors.  This paper concludes with some of the changes that entrepreneurial education could bring for the improvement of the economy and the general wellbeing of the individual and made suggestions on how to effectively achieve the aims and objectives of the programme. Among the suggestions was that the Centre for Entrepreneurial education have a guidance/counseling unit where students identified with the passion to follow through with what they have learnt should be encouraged, guided and linked with sources for financial and other help to establish them with a follow up mechanism after graduation.  It was also suggested that such 'success' stories of the Centre should be brought in at intervals to speak and market their product in the institutions so as to serve as a challenge and encouragement not only to the students but also to the lecturers knowing that their labours are not in vain and that they are among the people building the economy of the nation. Keywords: Entrepreneurial Education, Unemployment, Economy, Higher Institutions

Malaria, hepatitis B and HIV /AIDS, and their co-infection among Patients Visiting Health Centres in Akure, Nigeria

Co-infection is the simultaneous infection of host by multiple pathogenic species, which may co-exist together or not. In this study, the co-infection of malaria, HIV/AIDS and hepatitis B was investigated, using four different locations in Akure, Ondo State. Blood samples were aseptically collected from the left thumbs of 500 respondents using sterile lancets. Thin and thick smear of the blood samples were observed for malaria parasites using X100 magnification of the light microscope. Hepatitis B and HIV/AIDS were tested using diagnostic test kits. The results show that highest prevalence of malaria was observed in Oba-Ile (82.09%) among age group 31-40 years (92.72%).  The lowest prevalence was found in Ala-Ajagbusi (73.17%) among age group 21-30 years (70.03%). Highest prevalence of hepatitis (7.06%) was observed in Orita-Obele while the lowest prevalence was observed in Ala- Ajagbusi (4.88%).  HIV/AIDS infection was found Orita-Obele (1.76%, n=3) and Ala-Ajagbusi (2.44%, n=2). The results further show that all the individuals that tested positive to hepatitis B virus and HIV also tested positive to malaria. Also, 3 of the 5 individuals infected with HIV/AIDS tested positive to hepatitis B virus.  Similarly, malaria, hepatitis B virus and HIV cohabit in 2 individuals; 1 in age group 21-30 years and 1 in age group 31-40 years. Coinfection of malaria with hepatitis and HIV/AIDS suggests that malaria is an opportunistic infection among the hepatitis and AIDS patients. This calls for prompt malaria treatment among the immunocompromised patients. More so, there should be adequate and consistent public health advocacy programs, to enlighten the populace about malaria, hepatitis B and HIV/AIDS in order to completely mitigate the disease spread in the area

Experimental Analysis of the Wear Properties of Carburized HSS (ASTM A600) Cutting Tool

Prediction and control of undesirable deterioration of cutting tools are the most essential challenges emanating in the design of tool which has to be checked. As a result of an increase in wear rate of HSS cutting tools, so has the need for wear resistant. The result has been a progression of carburizing the tools for better performance. Based on the theoretical analysis and study of tool wear and parameters that mitigates against wear resistance of cutting tools, this research work presents an experimental investigation and analysis of the wear properties of carburized HSS cutting tools. Twelve Samples under consideration were carburized HSS (ASTM A600) tools (0.65% C) treated at 800,850,900 and 950oC with holding time of 60, 90 and 120 minutes respectively. The wear properties of weight loss, wear volume, wear resistance and wear rate were carried out using Rotopol –V, impact tester, polisher, grinder and weight scale. It was found from the experiment carried out that cutting tool(sample 5) carburized at holding temperature and time of 800 oC and 90 minutes has the lowest cutting weight loss, volume and wear rate of 0.002 g, 0.00026 cm3 and 5.476 X10-10 cm2 with maximum wear resistance of 1.83X109 . This showed that sample 5 has the best wear properties which undermined the general believe that the sample with highest holding temperature and time should have the highest wear properties. This experiment has further established carburization as one of the heat treatment methods that involved carbon penetration to the depth that improved wear rate and resistance of a material

Cost of Corrosion of Metallic Products in Federal University of Agriculture, Abeokuta

The cost of corrosion has been increasing drastically due to the degradation of the metallic materials. This study was carried out to estimate the “Cost of Corrosion of Metallic Products in Federal University of Agriculture, Abeokuta (FUNAAB)”. Questionnaires were administered and interviews were also conducted to gather necessary information. The cost of corrosion from 2013-2015 was estimated and analysed with the aid of engineering economy method and statistical analysis method. For the cost of corrosion prevention methods, cleaning gave the highest cost contribution (69%), followed by the use of oil (30%), use of grease (1%), and painting gave zero percent of the total cost. While on the cost of corrosion maintenance methods, repair gave the highest cost contributions (66%), and prevention gave (34%) of the total cost. The overall cost of corrosion from (2013-2015) gave an upward trend, but a downward trend in future value and the annualized value. While the forecast cost from (2013-2016) at (95%) confidence level and (5%) significance level gave an upward trend. The present value, future value, and annualized value from (2013-2016) increased by (66%, 43%, and 75%) respectively. The total cost and the total annualized value of corrosion from (2013-2015) were estimated to be N 166,955,641 and N 93,791,024, and with the forecast (2013-2016) were found to be N 277,650,388 and N 163,672,460 respectively. Under the corrosion prevention methods and corrosion maintenance methods, cleaning and repair gave highest cost contribution respectively. Corrosion prevention methods need to be added to bring down the repair cost of those facilities for saving cost

Is the digital rectal exam any good as a prostate cancer screening test?

© The Author(s). This is an open access article distributed under the terms of the Creative Commons Attribution License (CC BY), https://creativecommons.org/licenses/by/4.0/There is no shortage of references in popular culture to the prostate examination, with many a laugh built on the punchline of the finger up the bum. Interestingly, while cervical, breast, or bowel screening share barriers to uptake around the intimacy of the examination, ‘ick-factor’, or cultural taboos, they have never become comedy tropes — reflecting the uniquely emasculating perception of the rectal examination.Peer reviewe

Optimising the use of the prostate- specific antigen blood test in asymptomatic men for early prostate cancer detection in primary care: report from a UK clinical consensus

Screening is not recommended for prostate cancer in the UK. Asymptomatic men aged ≥50 years can request a prostate-specific antigen (PSA) test following counselling on potential harms and benefits. There are areas of clinical uncertainty among GPs, resulting in the content and quality of counselling varying. To produce a consensus that can influence guidelines for UK primary care on the optimal use of the PSA test in asymptomatic men for early prostate cancer detection. Prostate Cancer UK facilitated a RAND/UCLA consensus. Statements covering five topics were developed with a subgroup of experts. A panel of 15 experts in prostate cancer scored (round one) statements on a scale of one (strongly disagree) to nine (strongly agree). Panellists met to discuss statements before rescoring (round two). A lived experience panel of seven men scored a subset of statements with outcomes fed into the main panel. Of the initial 94 statements reviewed by the expert panel, a final 48/85 (56%) achieved consensus. In the absence of screening, there was consensus on proactive approaches to initiate discussions about the PSA test with men who were at higher-than-average risk. Improvements in the prostate cancer diagnostic pathway may have reduced some of the harms associated with PSA testing; however, several areas of uncertainty remain in relation to screening, including optimal PSA thresholds for referral and intervals for retesting. There is consensus on proactive approaches to testing in higher-than-average risk groups. This should prompt a review of current guidelines