Analysis of the Performance of Thermoelectric Modules Under Concentrated Radiation Heat Flux

The concentration of solar radiation by either a lens or a mirror is one of the options for practical utilisation of light to obtain higher temperatures. However, it is difficult to maintain high temperatures on the hot side of the module due to solar diurnal motion. This study evaluates the influence of the thermoelectric (TE) output by optical light concentration. Three-dimensional partial differential equations describing heat balance and TE phenomena were simultaneously solved by applying numerical methods, and the temperature distribution in the whole TE module as well as the current density were simulated. It was shown that the three models of light concentration on a single TE module (BiTe-based, four legs having dimensions of 10 mm x 10 mm x 10 mm) generate a similar output in the external load. This happens because the long leg becomes a large thermal resistance, and because the alumina plate (1 mm thick) with a high thermal conductivity covers the top of the TE modules. The homogenised temperature at the hot junctions generates a similar output in all three models when the cold terminals were kept at constant temperature

Performance Analysis of Thermoelectric Modules Consisting of Square Truncated Pyramid Elements Under Constant Heat Flux

System design of a thermoelectric (TE) power generation module is pursued in order to improve the TE performance. Square truncated pyramid shaped P-N pairs of TE elements are connected electronically in series in the open space between two flat insulator boards. The performance of the TE module consisting of 2-paired elements is numerically simulated using commercial software and original TE programs. Assuming that the heat radiating into the hot surface is regulated, i.e., the amount of heat from the hot surface to the cold one is steadily constant, as it happens for solar radiation heating, the performance is significantly improved by changing the shape and the alignment pattern of the elements. When the angle theta between the edge and the base is smaller than 72 degrees, and when the cold surface is kept at a constant temperature, two patterns in particular, amongst the 17 studied, show the largest TE power and efficiency. In comparison to other geometries, the smarter square truncated pyramid shape can provide higher performance using a large cold bath and constant heat transfer by heat radiation