2,292 research outputs found
Gravitational quantum states of neutrons in a rough waveguide
A theory of gravitational quantum states of ultracold neutrons in waveguides
with absorbing/scattering walls is presented. The theory covers recent
experiments in which the ultracold neutrons were beamed between a mirror and a
rough scatterer/absorber. The analysis is based on a recently developed theory
of quantum transport along random rough walls which is modified in order to
include leaky (absorbing) interfaces and, more importantly, the low-amplitude
high-aperture roughness. The calculations are focused on a regime when the
direct transitions into the continuous spectrum above the absorption threshold
dominate the depletion of neutrons from the gravitational states and are more
efficient than the processes involving the intermediate states. The theoretical
results for the neutron count are sensitive to the correlation radius (lateral
size) of surface inhomogeneities and to the ratio of the particle energy to the
absorption threshold in a weak roughness limit. The main impediment for
observation of the higher gravitational states is the "overhang" of the
particle wave functions which can be overcome only by use scatterers with
strong roughness. In general, the strong roughness with high amplitude is
preferable if one wants just to detect the individual gravitational states,
while the strong roughness experiments with small amplitude and high aperture
are preferable for the quantitative analysis of the data. We also discuss the
ways to further improve the accuracy of calculations and to optimize the
experimental regime.Comment: 48 pages, 14 figure
Mode Coupling in Quantized High Quality Films
The effect of coupling of quantized modes on transport and localization in
ultrathin films with quantum size effect (QSE) is discussed. The emphasis is on
comparison of films with Gaussian, exponential, and power-law long-range
behavior of the correlation function of surface, thickness, or bulk
fluctuations. For small-size inhomogeneities, the mode coupling is the same for
inhomogeneities of all types and the transport coefficients behave in the same
way. The mode coupling becomes extremely sensitive to the correlators for
large-size inhomogeneities leading to the drastically distinct behavior of the
transport coefficients. In high-quality films there is a noticeable difference
between the QSE patterns for films with bulk and surface inhomogeneities which
explains why the recently predicted new type of QSE with large oscillations of
the transport coefficients can be observed mostly in films with surface-driven
relaxation. In such films with surface-dominated scattering the higher modes
contribute to the transport only as a result of opening of the corresponding
mode coupling channels and appear one by one. Mode coupling also explains a
much higher transport contribution from the higher modes than it is commonly
believed. Possible correlations between the inhomogeneities from the opposite
walls provide, because of their oscillating response to the mode quantum
numbers, a unique insight into the mode coupling. The presence of
inhomogeneities of several sizes leads not to a mechanical mixture of QSE
patterns, but to the overall shifting and smoothing of the oscillations. The
results can lead to new, non-destructive ways of analysis of the buried
interfaces and to study of inhomogeneities on the scales which are inaccessible
for scanning techniques
The Effect of Random Surface Inhomogeneities on Microresonator Spectral Properties: Theory and Modeling at Millimeter Wave Range
The influence of random surface inhomogeneities on spectral properties of
open microresonators is studied both theoretically and experimentally. To solve
the equations governing the dynamics of electromagnetic fields the method of
eigen-mode separation is applied previously developed with reference to
inhomogeneous systems subject to arbitrary external static potential. We prove
theoretically that it is the gradient mechanism of wave-surface scattering
which is the highly responsible for non-dissipative loss in the resonator. The
influence of side-boundary inhomogeneities on the resonator spectrum is shown
to be described in terms of effective renormalization of mode wave numbers
jointly with azimuth indices in the characteristic equation. To study
experimentally the effect of inhomogeneities on the resonator spectrum, the
method of modeling in the millimeter wave range is applied. As a model object
we use dielectric disc resonator (DDR) fitted with external inhomogeneities
randomly arranged at its side boundary. Experimental results show good
agreement with theoretical predictions as regards the predominance of the
gradient scattering mechanism. It is shown theoretically and confirmed in the
experiment that TM oscillations in the DDR are less affected by surface
inhomogeneities than TE oscillations with the same azimuth indices. The DDR
model chosen for our study as well as characteristic equations obtained
thereupon enable one to calculate both the eigen-frequencies and the Q-factors
of resonance spectral lines to fairly good accuracy. The results of
calculations agree well with obtained experimental data.Comment: 17+ pages, 5 figure
Characterising sand and gravel deposits using electrical resistivity tomography (ERT) : case histories from England and Wales
Electrical Resistivity Tomography (ERT) is a rapidly developing geophysical imaging technique that is now widely
used to visualise subsurface geological structure, groundwater and lithological variations. It is being increasingly used
in environmental and engineering site investigations, but despite its suitability and potential benefits, ERT has yet to
be routinely applied by the minerals industry to sand and gravel deposit assessment and quarry planning. The
principal advantages of ERT for this application are that it is a cost-effective non-invasive method, which can provide
2D or 3D spatial models of the subsurface throughout the full region of interest. This complements intrusive sampling
methods, which typically provide information only at discrete locations. Provided that suitable resistivity contrasts are
present, ERT has the potential to reveal mineral and overburden thickness and quality variations within the body of
the deposit.
Here we present a number of case studies from the UK illustrating the use of 2D and 3D ERT for sand and gravel
deposit investigation in a variety of geological settings. We use these case studies to evaluate the performance of ERT,
and to illustrate good practice in the application of ERT to deposit investigation. We propose an integrated approach
to site investigation and quarry planning incorporating both conventional intrusive methods and ERT
Seismic topographic scattering in the context of GW detector site selection
In this paper, we present a calculation of seismic scattering from irregular
surface topography in the Born approximation. Based on US-wide topographic
data, we investigate topographic scattering at specific sites to demonstrate
its impact on Newtonian-noise estimation and subtraction for future
gravitational-wave detectors. We find that topographic scattering at a
comparatively flat site in Oregon would not pose any problems, whereas
scattering at a second site in Montana leads to significant broadening of wave
amplitudes in wavenumber space that would make Newtonian-noise subtraction very
challenging. Therefore, it is shown that topographic scattering should be
included as criterion in the site-selection process of future low-frequency
gravitational-wave detectors.Comment: 16 pages, 7 figure
Recommended from our members
Intra-arterial Onyx Embolization of Vertebral Body Lesions
While Onyx embolization of cerebrospinal arteriovenous shunts is well-established, clinical researchers continue to broaden applications to other vascular lesions of the neuraxis. This report illustrates the application of Onyx (eV3, Plymouth, MN) embolization to vertebral body lesions, specifically, a vertebral hemangioma and renal cell carcinoma vertebral body metastatic lesion
A model of the reflection distribution in the vacuum ultra violet region
A reflection model with three components, a specular spike, a specular lobe
and a diffuse lobe is discussed. This model was successfully applied to
describe reflection of xenon scintillation light (175 nm) by PTFE and other
fluoropolymers and can be used for Monte Carlo simulation and analysis of
scintillation detectors. The measured data favors a Trowbridge-Reitz
distribution function of ellipsoidal micro-surfaces. The intensity of the
coherent reflection increases with increasing angle of incidence, as expected,
since the surface appears smoother at grazing angles. The total reflectance
obtained for PTFE is about 70% for VUV light at normal incidence in vacuum and
estimated to be up to 100% in contact with liquid xenon
Fourier, Gauss, Fraunhofer, Porod and the Shape from Moments Problem
We show how the Fourier transform of a shape in any number of dimensions can
be simplified using Gauss's law and evaluated explicitly for polygons in two
dimensions, polyhedra three dimensions, etc. We also show how this combination
of Fourier and Gauss can be related to numerous classical problems in physics
and mathematics. Examples include Fraunhofer diffraction patterns, Porods law,
Hopfs Umlaufsatz, the isoperimetric inequality and Didos problem. We also use
this approach to provide an alternative derivation of Davis's extension of the
Motzkin-Schoenberg formula to polygons in the complex plane.Comment: 21 pages, no figure
A new application of reduced Rayleigh equations to electromagnetic wave scattering by two-dimensional randomly rough surfaces
The small perturbations method has been extensively used for waves scattering
by rough surfaces. The standard method developped by Rice is difficult to apply
when we consider second and third order of scattered fields as a function of
the surface height. Calculations can be greatly simplified with the use of
reduced Rayleigh equations, because one of the unknown fields can be
eliminated. We derive a new set of four reduced equations for the scattering
amplitudes, which are applied to the cases of a rough conducting surface, and
to a slab where one of the boundary is a rough surface. As in the
one-dimensional case, numerical simulations show the appearance of enhanced
backscattering for these structures.Comment: RevTeX 4 style, 38 pages, 16 figures, added references and comments
on the satellites peak
Surfaces roughness effects on the transmission of Gaussian beams by anisotropic parallel plates
Influence of the plate surfaces roughness in precise ellipsometry experiments
is studied. The realistic case of a Gaussian laser beam crossing a uniaxial
platelet is considered. Expression for the transmittance is determined using
the first order perturbation theory. In this frame, it is shown that
interference takes place between the specular transmitted beam and the
scattered field. This effect is due to the angular distribution of the Gaussian
beam and is of first order in the roughness over wavelength ratio. As an
application, a numerical simulation of the effects of quartz roughness surfaces
at normal incidence is provided. The interference term is found to be strongly
connected to the random nature of the surface roughness.Comment: 18 pages, Journal of Physics D: Applied Physics, volume 36, issue 21,
pages 2697 - 270
- …