34 research outputs found
Thermophysical Properties Measurement of High-Temperature Liquids Under Microgravity Conditions in Controlled Atmospheric Conditions
Microgravity conditions have advantages of measurement of surface tension and viscosity of metallic liquids by the oscillating drop method with an electromagnetic levitation (EML) device. Thus, we are preparing the experiments of thermophysical properties measurements using the Materials-Science Laboratories ElectroMagnetic-Levitator (MSL-EML) facilities in the international Space station (ISS). Recently, it has been identified that dependence of surface tension on oxygen partial pressure (Po2) must be considered for industrial application of surface tension values. Effect of Po2 on surface tension would apparently change viscosity from the damping oscillation model. Therefore, surface tension and viscosity must be measured simultaneously in the same atmospheric conditions. Moreover, effect of the electromagnetic force (EMF) on the surface oscillations must be clarified to obtain the ideal surface oscillation because the EMF works as the external force on the oscillating liquid droplets, so extensive EMF makes apparently the viscosity values large. In our group, using the parabolic flight levitation experimental facilities (PFLEX) the effect of Po2 and external EMF on surface oscillation of levitated liquid droplets was systematically investigated for the precise measurements of surface tension and viscosity of high temperature liquids for future ISS experiments. We performed the observation of surface oscillations of levitated liquid alloys using PFLEX on board flight experiments by Gulfstream II (G-II) airplane operated by DAS. These observations were performed under the controlled Po2 and also under the suitable EMF conditions. In these experiments, we obtained the density, the viscosity and the surface tension values of liquid Cu. From these results, we discuss about as same as reported data, and also obtained the difference of surface oscillations with the change of the EMF conditions
Surrogate models for the magnitude of convection in droplets levitated through EML, ADL, and ESL methods
Fluid flow and heat transfer in levitated droplets were numerically
investigated. Three levitation methods: electro-magnetic levitation (EML),
aerodynamic levitation (ADL), and electro-static levitation (ESL) were
considered, and conservative laws of mass, momentum, and energy were applied as
common models. The Marangoni effect was applied as a velocity boundary
condition, whereas heat transfer and radiation heat loss were considered as
thermal boundary conditions. As specific models to EML, the Lorentz force, and
Joule heat were calculated based on the analytical solution of the
electromagnetic field. For the ADL model, besides the Marangoni effect, the
flow driven by the surface shear force was considered. For ADL and ESL models,
the effect of laser heating was introduced as a boundary condition. All the
equations were nondimensionalized using common scales for all three
levitations. Numerical simulations were performed for several materials and
droplet sizes, and the results were evaluated in terms of the Reynolds number
based on the maximum velocity of the flow in the droplet. The order of
magnitude of Reynolds numbers was evaluated as for EML,
for ADL, and for ESL. Based on the
simulation results, we proposed simple formulas for predicting the Reynolds
number of droplet internal convection using combinations of nondimensional
numbers determined from the physical properties of the material and the driving
conditions. The proposed formulas can be used as surrogate models to predict
the Reynolds numbers, even for materials other than those used in this study
Efficacy of thalidomide in a girl with inflammatory calcinosis, a severe complication of juvenile dermatomyositis
We report a 14-year-old girl with juvenile dermatomyositis (JDM) complicated by severe inflammatory calcinosis successfully treated with thalidomide. She was diagnosed as JDM when she was 4 years old after a few months of increasing lethargy, muscle pain, muscle weakness, and rash. During three months, clinical manifestations and abnormal laboratory findings were effectively treated with oral prednisolone. However, calcinosis was recognized 18 months after disease onset. Generalized calcinosis rapidly progressed with high fever, multiple skin/subcutaneous inflammatory lesions, and increased level of CRP. Fifty mg/day (1.3 mg/kg day) of oral thalidomide was given for the first four weeks, and then the dose was increased to 75 mg/day. Clinical manifestations subsided, and inflammatory markers had clearly improved. Frequent high fever and local severe pain with calcinosis were suppressed. The levels of FDP-E, IgG, and tryglyceride, which were all elevated before the thalidomide treatment, were gradually returned to the normal range. Over the 18 months of observation up to the present, she has had no inflammatory calcinosis, or needed any hospitalization, although established calcium deposits still remain. Her condition became painless, less extensive and less inflammatory with the CRP level below 3.08 mg/dL. Recent examination by whole-body 18F-FDG-PET-CT over the 15 months of thalidomide treatment demonstrated fewer hot spots around the subcutaneous calcified lesions
Surface tension of liquid metals and alloys - Recent developments
Surface tension measurements are a central task in the study of surfaces and interfaces. For liquid metals, they are complicated by the high temperatures and the consequently high reactivity characterising these melts. In particular, oxidation of the liquid surface in combination with evaporation phenomena require a stringent control of the experimental conditions, and an appropriate theoretical treatment. Recently, much progress has been made on both sides. In addition to improving the conventional sessile drop technique, new containerless methods have been developed for surface tension measurements. This paper reviews the experimental progress made in the last few years, and the theoretical framework required for modelling and understanding the relevant physico-chemical surface phenomena
Metastable Phase Formation from Nd-Dy-Fe-B Undercooled Melt
Abstract Nd 10-x Dy x Fe 85 B 5 (x = 0-3) alloy samples were melted and then solidified in the containerless state of a drop tube at oxygen partial pressure of 10 -1 Pa. The calculated cooling rate of the spherical sample was over 10 3 K/s. The Nd 10 Fe 85 B 5 sample consists of the Nd 2 Fe 17 B x metastable phase together with the α-Fe dendrite. The metastable phase was partially decomposed into small grains of Nd 2 Fe 14 B and α-Fe phases by a solid state decomposition reaction. The substitution of Dy for Nd in the range from 10 to 20 atomic percent was effective to suppress the primary formation of the α-Fe dendrite and to promote the formation of the RE 2 Fe 17 B x metastable phase. When the substitution rate of Dy increased to 30 atomic percent, a large amount of the α-Fe dendrite was formed because an oxide layer of rare earth elements was generated at the sample surface due to the easy oxidization tendency of Dy