22,640 research outputs found
Radio frequency interference survey over the 1.0-10.4 GHz frequency range at the Goldstone-Venus Development Station
The results of a low sensitivity Radio Frequency Interference (RFI) survey carried out at the Venus Station of the Goldstone Communications Complex are reported. The data cover the spectral range from 1 GHz to 10.4 GHz with a 10-kHz instantaneous bandwidth. Frequency and power levels were observed using a sweep-frequency spectrum analyzer connected to a 1-m diameter antenna pointed at zenith. The survey was conducted from February 16, 1987 through February 24, 1987
Can the frequency-dependent specific heat be measured by thermal effusion methods?
It has recently been shown that plane-plate heat effusion methods devised for
wide-frequency specific-heat spectroscopy do not give the isobaric specific
heat, but rather the so-called longitudinal specific heat. Here it is shown
that heat effusion in a spherical symmetric geometry also involves the
longitudinal specific heat.Comment: Paper presented at the Fifth International Workshop on Complex
Systems (Sendai, September, 2007), to appear in AIP Conference Proceeding
Patterns in high-frequency FX data: Discovery of 12 empirical scaling laws
We have discovered 12 independent new empirical scaling laws in foreign
exchange data-series that hold for close to three orders of magnitude and
across 13 currency exchange rates. Our statistical analysis crucially depends
on an event-based approach that measures the relationship between different
types of events. The scaling laws give an accurate estimation of the length of
the price-curve coastline, which turns out to be surprisingly long. The new
laws substantially extend the catalogue of stylised facts and sharply constrain
the space of possible theoretical explanations of the market mechanisms.Comment: 26 pages, 3 figures, 23 tables,2nd version (text made more concise
and readable, algorithm pseudocode, results unchanged), 5-year datasets
(USD-JPY, EUR-USD) provided at http://www.olsen.ch/more/datasets
vbyCaHbeta CCD Photometry of Clusters. VI. The Metal-Deficient Open Cluster NGC 2420
CCD photometry on the intermediate-band vbyCaHbeta system is presented for
the metal-deficient open cluster, NGC 2420. Restricting the data to probable
single members of the cluster using the CMD and the photometric indices alone
generates a sample of 106 stars at the cluster turnoff. The average E(b-y) =
0.03 +/- 0.003 (s.e.m.) or E(B-V) = 0.050 +/- 0.004 (s.e.m.), where the errors
refer to internal errors alone. With this reddening, [Fe/H] is derived from
both m1 and hk, using b-y and Hbeta as the temperature index. The agreement
among the four approaches is reasonable, leading to a final weighted average of
[Fe/H] = -0.37 +/- 0.05 (s.e.m.) for the cluster, on a scale where the Hyades
has [Fe/H] = +0.12. When combined with the abundances from DDO photometry and
from recalibrated low-resolution spectroscopy, the mean metallicity becomes
[Fe/H] = -0.32 +/- 0.03. It is also demonstrated that the average cluster
abundances based upon either DDO data or low-resolution spectroscopy are
consistently reliable to 0.05 dex or better, contrary to published attempts to
establish an open cluster metallicity scale using simplistic offset corrections
among different surveys.Comment: scheduled for Jan. 2006 AJ; 33 pages, latex, includes 7 figures and 2
table
Airloads research study. Volume 2: Airload coefficients derived from wind tunnel data
The development of B-1 aircraft rigid wind tunnel data for use in subsequent tasks of the Airloads Research Study is described. Data from the Rockwell International external structural loads data bank were used to generate coefficients of rigid airload shear, bending moment, and torsion at specific component reference stations or both symmetric and asymmetric loadings. Component stations include the movable wing, horizontal and vertical stabilizers, and forward and aft fuselages. The coefficient data cover a Mach number range from 0.7 to 2.2 for a wing sweep position of 67.5 degree
Airloads research study. Volume 1: Flight test loads acquisition
The acquisition of B-1 aircraft flight loads data for use in subsequent tasks of the Airloads Research Study is described. The basic intent is to utilize data acquired during B-1 aircraft tests, analyze these data beyond the scope of Air Force requirements, and prepare research reports that will add to the technology base for future large flexible aircraft. Flight test data obtained during the airloads survey program included condition-describing parameters, surface pressures, strain gage outputs, and loads derived from pressure and strain gauges. Descriptions of the instrumentation, data processing, and flight load survey program are included. Data from windup-turn and steady yaw maneuvers cover a Mach number range from 0.7 to 2.0 for a wing sweep position of 67.5 deg
The table mountain 8-mm-wavelength interferometer
The system components, performance, and calibration of two element radio interferometer operating at 8.33 mm wavelength are discussed. The interferometer employs a 5.5 m and a 3 m diameter antenna on an east-west baseline of 60 or 120 m, yielding fringe spacings at transit of 28 or 14 in. respectively. The broad intermediate frequency bandpass of 100 to 350 MHz and the system noise temperature of 500 K provide high sensitivity for the measurement of continuum sources. The interferometer has been used for high resolution studies of the planets and the Sun, and it is currently being adapted to study solar flare emissions at high spatial and time resolution
- …