Genetic Variation of the DGAT1 gene in Dual-Purpose Dairy Cows and its Influence on Economically Important Breeding Traits

BackgroundOver the last 10 years, the discovery of individual, or candidate, genes that influence economically important traits has revolutionised how the dairy industry selects cows for breeding programmes. One such gene, the diacylglycerol O-acyltransferase 1 (DGAT1) gene is significant in dairy production as it is associated with the synthesis of fat in milk, and polymorphisms within the gene can be used for selection purposes. In this study, the variants (genotypes) of the K232A polymorphism of the DGAT1 gene, within a dual-purpose dairy herd, bred for both dairy and beef production, were determined, and compared to the Economic Breeding Index (EBI) and EBI sub-indexes to ascertain if any statistically significant relationships existed. MethodsDNA was extracted from hair samples, and the genotypes of the DGAT1 gene were determined using a combination of conventional PCR, restriction fragment length polymorphism (RFLP), gel electrophoresis, DNA sequencing and novel real-time PCR assays. ResultsThe three genotypes within the herd were: KK (n = 5), AA (n = 10), KA (n = 8). KK denoted a homologous Lysine allele, AA denoted a homologous Alanine allele, and KA denoted a heterologous Lysine allele. There was no association found between the milk production traits and the DGAT1 K232A genotype (P = 0.178). However, there was a significant association found between the K232A polymorphism and other EBI traits including ‘Beef’ and ‘Management’ which had P values of 0.035 and 0.023 respectively. The AA genotype was associated with higher beef traits (higher carcass values) and lower management traits (reduced milking time and good temperament). The KK genotype was associated with higher management traits and lower beef traits. These results were not always consistent with those in the literature. ConclusionsThis study showed that animals with the A allele of the DGAT1 gene polymorphism may be better suited for dual-purpose dairy herds. It is also possible that different breeding goals and farm environments may influence the results suggesting that these types of studies should be conducted on a variety of herds and include larger samples sizes

Epitaxial growth of Cu on Cu(001): experiments and simulations

A quantitative comparison between experimental and Monte Carlo simulation results for the epitaxial growth of Cu/Cu(001) in the submonolayer regime is presented. The simulations take into account a complete set of hopping processes whose activation energies are derived from semi-empirical calculations using the embedded-atom method. The island separation is measured as a function of the incoming flux and the temperature. A good quantitative agreement between the experiment and simulation is found for the island separation, the activation energies for the dominant processes, and the exponents that characterize the growth. The simulation results are then analyzed at lower coverages, which are not accessible experimentally, providing good agreement with theoretical predictions as well.Comment: Latex document. 7 pages. 3 embedded figures in separate PS files. One bbl fil

Tolerogenic dendritic cells generated with dexamethasone and vitamin D3 regulate rheumatoid arthritis CD4⁺ T cells partly via transforming growth factor-β1

Tolerogenic dendritic cells (tolDC) are a new immunotherapeutic tool for the treatment of rheumatoid arthritis (RA) and other autoimmune disorders. We have established a method to generate stable tolDC by pharmacological modulation of human monocyte‐derived DC. These tolDC exert potent pro‐tolerogenic actions on CD4(+) T cells. Lack of interleukin (IL)−12p70 production is a key immunoregulatory attribute of tolDC but does not explain their action fully. Here we show that tolDC express transforming growth factor (TGF)‐β1 at both mRNA and protein levels, and that expression of this immunoregulatory cytokine is significantly higher in tolDC than in mature monocyte‐derived DC. By inhibiting TGF‐β1 signalling we demonstrate that tolDC regulate CD4(+) T cell responses in a manner that is at least partly dependent upon this cytokine. Crucially, we also show that while there is no significant difference in expression of TGF‐βRII on CD4(+) T cells from RA patients and healthy controls, RA patient CD4(+) T cells are measurably less responsive to TGF‐β1 than healthy control CD4(+) T cells [reduced TGF‐β‐induced mothers against decapentaplegic homologue (Smad)2/3 phosphorylation, forkhead box protein 3 (FoxP3) expression and suppression of (IFN)‐γ secretion]. However, CD4(+) T cells from RA patients can, nonetheless, be regulated efficiently by tolDC in a TGF‐β1‐dependent manner. This work is important for the design and development of future studies investigating the potential use of tolDC as a novel immunotherapy for the treatment of RA

Costs and Cost-Effectiveness of Hypertension Screening and Treatment in Adults with Hypertension in Rural Nigeria in the Context of a Health Insurance Program.

BACKGROUND: High blood pressure is a leading risk factor for death and disability in sub-Saharan Africa (SSA). We evaluated the costs and cost-effectiveness of hypertension care provided within the Kwara State Health Insurance (KSHI) program in rural Nigeria. METHODS: A Markov model was developed to assess the costs and cost-effectiveness of population-level hypertension screening and subsequent antihypertensive treatment for the population at-risk of cardiovascular disease (CVD) within the KSHI program. The primary outcome was the incremental cost per disability-adjusted life year (DALY) averted in the KSHI scenario compared to no access to hypertension care. We used setting-specific and empirically-collected data to inform the model. We defined two strategies to assess eligibility for antihypertensive treatment based on 1) presence of hypertension grade 1 and 10-year CVD risk of >20%, or grade 2 hypertension irrespective of 10-year CVD risk (hypertension and risk based strategy) and 2) presence of hypertension in combination with a CVD risk of >20% (risk based strategy). We generated 95% confidence intervals around the primary outcome through probabilistic sensitivity analysis. We conducted one-way sensitivity analyses across key model parameters and assessed the sensitivity of our results to the performance of the reference scenario. RESULTS: Screening and treatment for hypertension was potentially cost-effective but the results were sensitive to changes in underlying assumptions with a wide range of uncertainty. The incremental cost-effectiveness ratio for the first and second strategy respectively ranged from US$1,406 to US$ 7,815 and US$732 to US$ 2,959 per DALY averted, depending on the assumptions on risk reduction after treatment and compared to no access to antihypertensive treatment. CONCLUSIONS: Hypertension care within a subsidized private health insurance program may be cost-effective in rural Nigeria and public-private partnerships such as the KSHI program may provide opportunities to finance CVD prevention care in SSA

The ArgoNeuT Detector in the NuMI Low-Energy beam line at Fermilab

The ArgoNeuT liquid argon time projection chamber has collected thousands of neutrino and antineutrino events during an extended run period in the NuMI beam-line at Fermilab. This paper focuses on the main aspects of the detector layout and related technical features, including the cryogenic equipment, time projection chamber, read-out electronics, and off-line data treatment. The detector commissioning phase, physics run, and first neutrino event displays are also reported. The characterization of the main working parameters of the detector during data-taking, the ionization electron drift velocity and lifetime in liquid argon, as obtained from through-going muon data complete the present report.Comment: 43 pages, 27 figures, 5 tables - update referenc

On the Use of Carbon Cables from Plastic Solvent Combinations of Polystyrene and Toluene in Carbon Nanotube Synthesis

For every three people on the planet, there are approximately two Tonnes (Te) of plastic waste. We show that carbon recovery from polystyrene (PS) plastic is enhanced by the coaddition of solvents to grow carbon nanotubes (CNTs) by liquid injection chemical vapour deposition. Polystyrene was loaded up to 4 wt% in toluene and heated to 780 °C in the presence of a ferrocene catalyst and a hydrogen/argon carrier gas at a 1:19 ratio. High resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), thermogravimetric analysis (TGA) and Raman spectroscopy were used to identify multiwalled carbon nanotubes (MWCNTs). The PS addition in the range from 0 to 4 wt% showed improved quality and CNT homogeneity; Raman “Graphitic/Defective” (G/D) values increased from 1.9 to 2.3; mean CNT diameters increased from 43.0 to 49.2 nm; and maximum CNT yield increased from 11.37% to 14.31%. Since both the CNT diameters and the percentage yield increased following the addition of polystyrene, we conclude that carbon from PS contributes to the carbon within the MWCNTs. The electrical contact resistance of acid-washed Bucky papers produced from each loading ranged from 2.2 to 4.4 Ohm, with no direct correlation to PS loading. Due to this narrow range, materials with different loadings were mixed to create the six wires of an Ethernet cable and tested using iPerf3; the cable achieved up- and down- link speeds of ~99.5 Mbps, i.e., comparable to Cu wire with the same dimensions (~99.5 Mbps). The lifecycle assessment (LCA) of CNT wire production was compared to copper wire production for a use case in a Boeing 747-400 over the lifespan of the aircraft. Due to their lightweight nature, the CNT wires decreased the CO2 footprint by 21 kTonnes (kTe) over the aircraft’s lifespan.We would like to thank Keysight Technologies for the use of a test model of the B2900A SMU. We would like to acknowledge the assistance provided by Swansea University College of Engineering AIM Facility. We would like to thank TRIMTABS Ltd. for purchasing equipment required for making ethernet cables. Thanks to Swansea Employability Academy (SEA) for the summer placements scheme. Thanks to the Swansea University Texas Strategic Partnership. R.E.P. acknowledges his work was associated with the IMPACT operation. We acknowledge pixabay for use of imagery in the graphical abstract (https://pixabay.com/vectors/airplane-boeing-747-transport-48 11157/ (accessed on 1 December 2021))