73 research outputs found
Internal conversion coefficients for superheavy elements
The internal conversion coefficients (ICC) were calculated for all atomic
subshells of the elements with 104<=Z<=126, the E1...E4, M1...M4
multipolarities and the transition energies between 10 and 1000 keV. The atomic
screening was treated in the relativistic Hartree-Fock-Slater model. The Tables
comprising almost 90000 subshell and total ICC were recently deposited at LANL
preprint server.Comment: 6 pages including 3 figures, needs files myown.sty and epsfig.sty
(both included
Evidence for short range orbital order in paramagnetic insulating (Al,V)_2O_3
The local structure of (Al_0.06V_0.94)_2O_3 in the paramagnetic insulating
(PI) and antiferromagnetically ordered insulating (AFI) phase has been
investigated using hard and soft x-ray absorption techniques. It is shown that:
1) on a local scale, the symmetry of the vanadium sites in both the PI and the
AFI phase is the same; and 2) the vanadium 3d - oxygen 2p hybridization, as
gauged by the oxygen 1s absorption edge, is the same for both phases, but
distinctly different from the paramagnetic metallic phase of pure V_2O_3. These
findings can be understood in the context of a recently proposed model which
relates the long range monoclinic distortion of the antiferromagnetically
ordered state to orbital ordering, if orbital short range order in the PI phase
is assumed. The measured anisotropy of the x-ray absorption spectra is
discussed in relation to spin-polarized density functional calculations.Comment: 8 pages, 5 figure
Almost uniform sampling via quantum walks
Many classical randomized algorithms (e.g., approximation algorithms for
#P-complete problems) utilize the following random walk algorithm for {\em
almost uniform sampling} from a state space of cardinality : run a
symmetric ergodic Markov chain on for long enough to obtain a random
state from within total variation distance of the uniform
distribution over . The running time of this algorithm, the so-called {\em
mixing time} of , is , where
is the spectral gap of .
We present a natural quantum version of this algorithm based on repeated
measurements of the {\em quantum walk} . We show that it
samples almost uniformly from with logarithmic dependence on
just as the classical walk does; previously, no such
quantum walk algorithm was known. We then outline a framework for analyzing its
running time and formulate two plausible conjectures which together would imply
that it runs in time when is
the standard transition matrix of a constant-degree graph. We prove each
conjecture for a subclass of Cayley graphs.Comment: 13 pages; v2 added NSF grant info; v3 incorporated feedbac
The Hilbertian Tensor Norm and Entangled Two-Prover Games
We study tensor norms over Banach spaces and their relations to quantum
information theory, in particular their connection with two-prover games. We
consider a version of the Hilbertian tensor norm and its dual
that allow us to consider games with arbitrary output alphabet
sizes. We establish direct-product theorems and prove a generalized
Grothendieck inequality for these tensor norms. Furthermore, we investigate the
connection between the Hilbertian tensor norm and the set of quantum
probability distributions, and show two applications to quantum information
theory: firstly, we give an alternative proof of the perfect parallel
repetition theorem for entangled XOR games; and secondly, we prove a new upper
bound on the ratio between the entangled and the classical value of two-prover
games.Comment: 33 pages, some of the results have been obtained independently in
arXiv:1007.3043v2, v2: an error in Theorem 4 has been corrected; Section 6
rewritten, v3: completely rewritten in order to improve readability; title
changed; references added; published versio
Commissioning of the vacuum system of the KATRIN Main Spectrometer
The KATRIN experiment will probe the neutrino mass by measuring the
beta-electron energy spectrum near the endpoint of tritium beta-decay. An
integral energy analysis will be performed by an electro-static spectrometer
(Main Spectrometer), an ultra-high vacuum vessel with a length of 23.2 m, a
volume of 1240 m^3, and a complex inner electrode system with about 120000
individual parts. The strong magnetic field that guides the beta-electrons is
provided by super-conducting solenoids at both ends of the spectrometer. Its
influence on turbo-molecular pumps and vacuum gauges had to be considered. A
system consisting of 6 turbo-molecular pumps and 3 km of non-evaporable getter
strips has been deployed and was tested during the commissioning of the
spectrometer. In this paper the configuration, the commissioning with bake-out
at 300{\deg}C, and the performance of this system are presented in detail. The
vacuum system has to maintain a pressure in the 10^{-11} mbar range. It is
demonstrated that the performance of the system is already close to these
stringent functional requirements for the KATRIN experiment, which will start
at the end of 2016.Comment: submitted for publication in JINST, 39 pages, 15 figure
Limits on the release of Rb isotopes from a zeolite based 83mKr calibration source for the XENON project
The isomer 83mKr with its half-life of 1.83 h is an ideal calibration source
for a liquid noble gas dark matter experiment like the XENON project. However,
the risk of contamination of the detector with traces of the much longer lived
mother isotop 83Rb (86.2 d half-life) has to be ruled out. In this work the
release of 83Rb atoms from a 1.8 MBq 83Rb source embedded in zeolite beads has
been investigated. To do so, a cryogenic trap has been connected to the source
for about 10 days, after which it was removed and probed for the strongest 83Rb
gamma-rays with an ultra-sensitive Germanium detector. No signal has been
found. The corresponding upper limit on the released 83Rb activity means that
the investigated type of source can be used in the XENON project and similar
low-background experiments as 83mKr generator without a significant risk of
contaminating the detector. The measurements also allow to set upper limits on
the possible release of the isotopes 84Rb and 86Rb, traces of which were
created alongside the production of 83Rb at the Rez cyclotron.Comment: 11 pages, 7 figures, submitted to Journal of Instrumentatio
Target Cueing Provides Support for Target- and Resource-Based Models of the Attentional Blink
The attentional blink (AB) describes a time-based deficit in processing the second of two masked targets. The AB is attenuated if successive targets appear between the first and final target, or if a cueing target is positioned before the final target. Using various speeds of stimulus presentation, the current study employed successive targets and cueing targets to confirm and extend an understanding of target-target cueing in the AB. In Experiment 1, three targets were presented sequentially at rates of 30 msec/item or 90 msec/item. Successive targets presented at 90 msec improved performance compared with non-successive targets. However, accuracy was equivalently high for successive and non-successive targets presented at 30 msec/item, suggesting that–regardless of whether they occurred consecutively–those items fell within the temporally defined attentional window initiated by the first target. Using four different presentation speeds, Experiment 2 confirmed the time-based definition of the AB and the success of target-cueing at 30 msec/item. This experiment additionally revealed that cueing was most effective when resources were not devoted to the cue, thereby implicating capacity limitations in the AB. Across both experiments, a novel order-error measure suggested that errors tend to decrease with an increasing duration between the targets, but also revealed that certain stimulus conditions result in stable order accuracy. Overall, the results are best encapsulated by target-based and resource-sharing theories of the AB, which collectively value the contributions of capacity limitations and optimizing transient attention in time
Recommended from our members
Measurement of RF surface efficiency at cryogenic temperatures using a resonant cavity
Exploiting the potential efficiency gain of a normal conducting rf accelerator operated at cryogenic temperatures requires careful preparation of the rf conducting surface. Experimental apparatus has been assembled to study the surface conductivity to rf currents at 425 MHz and 850 MHz through a temperature range from room temperature to 14 K. The apparatus is built around an open-ended coaxial cavity with the cavity tubular ends below the cutoff frequency at resonance. The center conductor in the coaxial cavity is the test sample, and the use of a dielectric stand-off for the center conductor precludes the need for an rf contact joint and facilitates sample changes. The rf testing is conducted under vacuum with low-power rf. A CTI-Cryogenics cryopump coldhead is used for cryogenic temperature cycling of the test cavity. A detailed description of the apparatus and measurement procedures are presented
- …