Global study of 9 Be + p at 2.72 A MeV

Background: In our recent experiment, 9 Be + p at 5.67 A MeV, the breakup decay rates to the three configurations, α + α + n , 8 Be ∗ + n and 5 He + 4 He of 9 Be , were observed and quantified in the proton recoil spectra, in a full kinematics approach. Unfolding step by step the accessibility to the above configurations, it will require similar experiments at lower or/and higher energies. It will also require the interpretation of the data in a theoretical framework. Three-body models for the structure of 9 Be have been developed and applied to reactions with heavy targets. Further research on lighter targets is required for the best establishment of the model. Such models are relevant for the calculation of the corresponding radiative capture reaction rate, α ( α , γ ) 9 Be followed by 9 Be ( α , n ) 12 C . The last is essential for the r -process abundance predictions. Purpose: Investigate the breakup decay rate of 9 Be + p at 2.72 A MeV, where the direct configuration α + α + n is mainly accessible. Compare and interpret data at this low energy and at the higher energy of 5.67 A MeV into a four-body continuum discretized coupled-channel formalism. Point out and discuss couplings to continuum. Methods: Our experimental method includes an exclusive breakup measurement in a full kinematic approach of 9 Be incident on a proton target at 24.5 MeV ( 2.72 A MeV). Complementary the elastic scattering is measured and other reaction channels are evaluated from previous measurements under the same experimental conditions. The interpretation of present data at 2.72 A MeV and previous data at 5.67 A MeV, are considered in a four-body continuum discretized coupled channel (CDCC) approach, using the transformed harmonic oscillator method for the three-body projectile. Results: An elastic scattering angular distribution at 2.72 A MeV is measured, which compares very well with CDCC calculations, indicating a strong coupling to continuum. At the same energy, the breakup and total reaction cross sections are measured as σ break = 2.5 ± 1 mb and σ tot = 510 ± L 90 mb , in good agreement with the calculated values of 3.7 and 433 mb, respectively. Further on, into the same theoretical framework, the elastic scattering and breakup cross section data at 5.67 A MeV are found in very good agreement with the CDCC calculations. Conclusions: It was confirmed in a global experimental framework that four-body CDCC calculations can describe very well the data even at low energies. Coupling to continuum is very strong despite the small measured breakup cross section. Moreover, the present results support further our three-body model for the structure of 9 Be , validating relevant radiative reaction rates obtained previously.Programa de investigación e innovación de la Unión Europea HORIZON2020 No. 654002-ENSAR2European Research Council (ERC) 714625Ministerio de Ciencia, Innovación y Universidades de España. PGC2018-095640-B-I00Ministerio de España de Economía y Competitividad y Fondo de Desarrollo de la Unión Europea (FEDER) FIS2017- 88410-PFondos SID 2019 (Università degli Studi di Padua, Italia) CASA_SID19_0

A study on corrosion resistance of ISO 5832-1 austenitic stainless steel used as orthopedic implant

The ISO 5832-1 austenitic stainless steel used as biomaterial is largely applied in the area of orthopedics, especially in the manufacture of implants, such as temporary or permanent replacement of bone structures. The objective of this study was to evaluate the localized corrosion resistance of the ISO 5832-1 stainless steel used in orthopedic implants by electrochemical tests in two different solutions. The results of this study are of great interest to evaluate the corrosion of metallic implants that can result in the release of corrosion products into bodily fluids causing possible adverse biological reactions. The determination of the chemical elements in the composition of the ISO 5832-1 stainless steel was performed by neutron activation analysis (NAA). The samples for electrochemical tests were grinded with silicon carbide paper up to #4000 finishing, followed by mechanical polishing with diamond paste. The open circuit potential measurements and anodic polarization curves were obtained in solution of 0.90 wt. % of NaCl and of simulated body fluid (SBF). The results indicated that the ISO 5832-1 stainless steel presented a high resistance to crevice corrosion in simulated body fluid solution but high susceptibility to this form of corrosion in the chloride solution. &nbsp

Study of ph effect on AZ31 magnesium alloy corrosion for using in temporary implants

Currently, magnesium alloys are gaining great interest for medical applications due to their degrading properties in the human body ensuring a great biocompatibility. These alloys also provide profitable mechanical properties due similarities with human bone.  However, a difficulty in applying these materials in the biomaterials industries is the corrosion prior to cell healing. The effect of the chemical composition of Mg alloys on their corrosion behavior is well known. In this study, samples of AZ31 magnesium alloy were cut into chips for elemental chemical analysis by neutron activation analysis (NAA). Concentrations of the elements As, La, Mg, Mn, Na, Sb and Zn were determined in the AZ31 alloy. Visualization tests of agar corrosion development in various media, of 0.90% sodium chloride solution (mass), phosphate buffer saline (PBS) and simulated body fluid (SBF) were performed. Visualizations of the effect of agar gel corrosion revealed pH variation during the corrosion process due to the released into the cathode. The highest released of hydroxyl ions occurred in NaCl solution compared to PBS and SBF solutions indicating that NaCl solution was much more aggressive to the alloy compared to the others

Student responses to the introduction of case-based learning and practical activities into a theoretical obstetrics and gynaecology teaching programme

BACKGROUND: The fourth-year Obstetrics and Gynaecology course at our institution had previously been taught using theory classes alone. A new teaching model was introduced to provide a better link with professional practice. We wished to evaluate the impact of the introduction of case discussions and other practical activities upon students' perceptions of the learning process. METHODS: Small-group discussions of cases and practical activities were introduced for the teaching of a fourth-year class in 2003 (Group II; 113 students). Comparisons were made with the fourth-year class of 2002 (Group I; 108 students), from before the new programme was introduced. Students were asked to rate their satisfaction with various elements of the teaching programme. Statistical differences in their ratings were analysed using the chi-square and Bonferroni tests. RESULTS: Group II gave higher ratings to the clarity of theory classes and lecturers' teaching abilities (p < 0.05) and lecturers' punctuality (p < 0.001) than did Group I. Group II had greater belief that the knowledge assessment tests were useful (p < 0.001) and that their understanding of the subject was good (p < 0.001) than did Group I. Group II gave a higher overall rating to the course (p < 0.05) than did Group I. However, there was no difference in the groups' assessments of the use made of the timetabled hours available for the subject or lecturers' concern for students' learning. CONCLUSIONS: Students were very receptive to the new teaching model

Congenital tumors: imaging when life just begins

BACKGROUND: The technical developments of imaging methods over the last 2 decades are changing our knowledge of perinatal oncology. Fetal ultrasound is usually the first imaging method used and thus constitutes the reference prenatal study, but MRI seems to be an excellent complementary method for evaluating the fetus. The widespread use of both techniques has increased the diagnosis rates of congenital tumors. During pregnancy and after birth, an accurate knowledge of the possibilities and limits of the different imaging techniques available would improve the information obtainable, thus helping the medical team to make the most appropriate decisions about therapy and to inform the family about the prognosis. CONCLUSION: In this review article, we describe the main congenital neoplasms, their prognosis and their imaging characteristics with the different pre- and postnatal imaging methods available

Mejora de la competitividad del sector de la dorada (Sparus aurata) a través de la selección genética. PNA PROGENSA-III

This project promotes technology developments for gilthead sea bream industrial sector of Spain, to facilitate and normalize the implementation of genetic selection schemes in this species, by defining new technological traits of commercial interest, with new standardized and extensible technological developments that permit, in an economical manner, normalized measuring methods, to study genetic parameters (growth, morphology, carcass and resistance disease), genotype-environment interaction to extend the Spanish production, and guarantee the production levels to the whole production chain. At the same time, improving the breeders management under industrial conditions, the validation of feeding efficiency during the selection processes and location of biomarkers linked and applied in genomic selectionCon la presente propuesta se pretende desarrollar metodología transferible al sector industrial de dorada en España que facilite y normalice la implementación de esquemas de selección genética en esta especie, mediante la definición de caracteres de interés comercial con nuevos desarrollos tecnológicos que estandaricen y hagan extensible a todo el sector, de manera económica, la medición de caracteres a escala industrial, el estudio de parámetros genéticos para caracteres de interés comercial (crecimiento, morfología, rendimiento y resistencia a enfermedades) en stocks de reproductores de la industria española, la estimación de la interacción genotipo-ambiente para permitir de manera garante la expansión de los rendimientos productivos de la industria Española, la gestión de reproductores bajo los propios condicionantes de la industria, así como la validación de la eficiencia alimenticia de los procesos de selección y búsqueda de biomarcadores asociados y aplicables en los modelos de selección