184 research outputs found
The impact of the grazing animal on phosphorus, nitrogen, potassium and suspended solids loss from grazed pastures, Part A
Teagasc wishes to acknowledge the support of the Environmental Research Technological
Development and Innovation (ERTDI) Programme under the Productive Sector Operational
Programme which was financed by the Irish Government under the National Development
Plan 2000-2006.End of project reportIn Ireland 90% of the 4.2 million ha of farmland is grassland. Phosphorus deficiency limited grassland production in Ireland and this was corrected by chemical fertiliser use in the 1960s and 1970s. The increased inputs of fertilisers led to increased intensification of grassland with a doubling of grass yield and of grazing animal numbers, from about 3 million to over 6 million livestock units. There is little information on relative contribution of increased chemical fertiliser use compared to increased grazing animal numbers on phosphorus loss to water. The main objective of this study was to obtain information on nutrient loss, particularly phosphorus, in overland flow from cut and grazed grassland plots, with a range of soil test phosphorus levels over three years and implications.Environmental Protection Agenc
Development of a multivariable risk model integrating urinary cell DNA methylation and cell-free RNA data for the detection of significant prostate cancer
Background: Prostate cancer exhibits severe clinical heterogeneity and there is a critical need for clinically implementable tools able to precisely and noninvasively identify patients that can either be safely removed from treatment pathways or those requiring further follow up. Our objectives were to develop a multivariable risk prediction model through the integration of clinical, urine-derived cell-free messenger RNA (cf-RNA) and urine cell DNA methylation data capable of noninvasively detecting significant prostate cancer in biopsy naïve patients. Methods: Post-digital rectal examination urine samples previously analyzed separately for both cellular methylation and cf-RNA expression within the Movember GAP1 urine biomarker cohort were selected for a fully integrated analysis (n = 207). A robust feature selection framework, based on bootstrap resampling and permutation, was utilized to find the optimal combination of clinical and urinary markers in a random forest model, deemed ExoMeth. Out-of-bag predictions from ExoMeth were used for diagnostic evaluation in men with a clinical suspicion of prostate cancer (PSA ≥ 4 ng/mL, adverse digital rectal examination, age, or lower urinary tract symptoms). Results: As ExoMeth risk score (range, 0-1) increased, the likelihood of high-grade disease being detected on biopsy was significantly greater (odds ratio = 2.04 per 0.1 ExoMeth increase, 95% confidence interval [CI]: 1.78-2.35). On an initial TRUS biopsy, ExoMeth accurately predicted the presence of Gleason score ≥3 + 4, area under the receiver-operator characteristic curve (AUC) = 0.89 (95% CI: 0.84-0.93) and was additionally capable of detecting any cancer on biopsy, AUC = 0.91 (95% CI: 0.87-0.95). Application of ExoMeth provided a net benefit over current standards of care and has the potential to reduce unnecessary biopsies by 66% when a risk threshold of 0.25 is accepted. Conclusion: Integration of urinary biomarkers across multiple assay methods has greater diagnostic ability than either method in isolation, providing superior predictive ability of biopsy outcomes. ExoMeth represents a more holistic view of urinary biomarkers and has the potential to result in substantial changes to how patients suspected of harboring prostate cancer are diagnosed
Blocked isocyanates:from analytical and experimental considerations to non-polyurethane applications
In this review we aim to provide an introductory guide to blocked isocyanates, through discussion on different examples of blocking groups, along with experimental considerations for their application. The review brings together updated examples of functionalities used and places specific emphasis on the analytical techniques used for the determination of deblocking temperature, updating previous reviews with the newly applied technique of X-ray photoelectron spectroscopy (XPS). Additionally, we put forward a brief update on the use of blocked isocyanates for other non-traditional polyurethane based polymer applications. We also highlight the importance of matching the analytical technique to the application of the blocked isocyanate, with differences in material state and experimental parameters having a great impact on the deblocking temperature reported
Pathways for nutrient loss to water with emphasis on phosphorus
Teagasc wishes to acknowledge the support of the Environmental Research Technological
Development and Innovation (ERTDI) Programme under the Productive Sector Operational
Programme which was financed by the Irish Government under the National Development
Plan 2000-2006.End of project reportThe main objective of this project was to study phosphorus (P) loss from agricultural land under a range of conditions in Ireland, to quantify the main factors influencing losses and make recommendations on ways to reduce these losses. This report is a synthesis of the main conclusions and recommendations from the results of the studies. The final reports from the individual sub-projects in this project are available from the EPA (www.epa.ie).Environmental Protection Agenc
Fabrication and Assessment of 3D Printed Anatomical Models of the Lower Limb for Anatomical Teaching and Femoral Vessel Access Training in Medicine
For centuries, cadaveric dissection has been the touchstone of anatomy education. It offers a medical student intimate access to his or her first patient. In contrast to idealized artisan anatomical models, it presents the natural variation of anatomy in fine detail. However, a new teaching construct has appeared recently in which artificial cadavers are manufactured through three-dimensional (3D) printing of patient specific radiological data sets. In this article, a simple powder based printer is made more versatile to manufacture hard bones, silicone muscles and perfusable blood vessels. The approach involves blending modern approaches (3D printing) with more ancient ones (casting and lost-wax techniques). These anatomically accurate models can augment the approach to anatomy teaching from dissection to synthesis of 3D-printed parts held together with embedded rare earth magnets. Vascular simulation is possible through application of pumps and artificial blood. The resulting arteries and veins can be cannulated and imaged with Doppler ultrasound. In some respects, 3D-printed anatomy is superior to older teaching methods because the parts are cheap, scalable, they can cover the entire age span, they can be both dissected and reassembled and the data files can be printed anywhere in the world and mass produced. Anatomical diversity can be collated as a digital repository and reprinted rather than waiting for the rare variant to appear in the dissection room. It is predicted that 3D printing will revolutionize anatomy when poly-material printing is perfected in the early 21st century. (C) 2015 American Association of Anatomists
Fabrication and Assessment of 3D Printed Anatomical Models of the Lower Limb for Anatomical Teaching and Femoral Vessel Access Training in Medicine
For centuries, cadaveric dissection has been the touchstone of anatomy education. It offers a medical student intimate access to his or her first patient. In contrast to idealized artisan anatomical models, it presents the natural variation of anatomy in fine detail. However, a new teaching construct has appeared recently in which artificial cadavers are manufactured through three-dimensional (3D) printing of patient specific radiological data sets. In this article, a simple powder based printer is made more versatile to manufacture hard bones, silicone muscles and perfusable blood vessels. The approach involves blending modern approaches (3D printing) with more ancient ones (casting and lost-wax techniques). These anatomically accurate models can augment the approach to anatomy teaching from dissection to synthesis of 3D-printed parts held together with embedded rare earth magnets. Vascular simulation is possible through application of pumps and artificial blood. The resulting arteries and veins can be cannulated and imaged with Doppler ultrasound. In some respects, 3D-printed anatomy is superior to older teaching methods because the parts are cheap, scalable, they can cover the entire age span, they can be both dissected and reassembled and the data files can be printed anywhere in the world and mass produced. Anatomical diversity can be collated as a digital repository and reprinted rather than waiting for the rare variant to appear in the dissection room. It is predicted that 3D printing will revolutionize anatomy when poly-material printing is perfected in the early 21st century. (C) 2015 American Association of Anatomists
Cost-utility of Intravenous Immunoglobulin (IVIG) compared with corticosteroids for the treatment of Chronic Inflammatory Demyelinating Polyneuropathy (CIDP) in Canada
- …