Diffusion of In0.53Ga0.47As elements through hafnium oxide during post deposition annealing

Diffusion of indium through HfO2 after post deposition annealing in N-2 or forming gas environments is observed in HfO2/In0.53Ga0.47As stacks by low energy ion scattering and X-ray photo electron spectroscopy and found to be consistent with changes in interface layer thickness observed by transmission electron microscopy. Prior to post processing, arsenic oxide is detected at the surface of atomic layer deposition-grown HfO2 and is desorbed upon annealing at 350 degrees C. Reduction of the interfacial layer thickness and potential densification of HfO2, resulting from indium diffusion upon annealing, is confirmed by an increase in capacitance. (C) 2014 AIP Publishing LLC

Band offsets and trap-related electron transitions at interfaces of (100)InAs with atomic-layer deposited Al2O3

Spectral analysis of optically excited currents in single-crystal (100)InAs/amorphous (a-)Al2O3/metal structures allows one to separate contributions stemming from the internal photoemission (IPE) of electrons into alumina and from the trapping-related displacement currents. IPE spectra suggest that the out-diffusion of In and, possibly, its incorporation in a-Al2O3 lead to the development of ≈0.4 eV wide conduction band (CB) tail states. The top of the InAs valence band is found at 3.45 ± 0.10 eV below the alumina CB bottom, i.e., at the same energy as at the GaAs/a-Al2O3 interface. This corresponds to the CB and the valence band offsets at the InAs/a-Al2O3 interface of 3.1 ± 0.1 eV and 2.5 ± 0.1 eV, respectively. However, atomic-layer deposition of alumina on InAs results in additional low-energy electron transitions with spectral thresholds in the range of 2.0–2.2 eV, which is close to the bandgap of AlAs. The latter suggests the interaction of As with Al, leading to an interlayer containing Al-As bonds providing a lower barrier for electron injection

Source apportionment of PM2.5 in Cork Harbour, Ireland using a combination of single particle mass spectrometry and quantitative semi-continuous measurements

An aerosol time-of-flight mass spectrometer (ATOFMS) was deployed for the measurement of the size resolved chemical composition of single particles at a site in Cork Harbour, Ireland for three weeks in August 2008. The ATOFMS was co-located with a suite of semi-continuous instrumentation for the measurement of particle number, elemental carbon (EC), organic carbon (OC), sulfate and particulate matter smaller than 2.5 μm in diameter (PM2.5). The temporality of the ambient ATOFMS particle classes was subsequently used in conjunction with the semi-continuous measurements to apportion PM2.5 mass using positive matrix factorisation. The synergy of the single particle classification procedure and positive matrix factorisation allowed for the identification of six factors, corresponding to vehicular traffic, marine, long-range transport, various combustion, domestic solid fuel combustion and shipping traffic with estimated contributions to the measured PM2.5 mass of 23%, 14%, 13%, 11%, 5% and 1.5% respectively. Shipping traffic was found to contribute 18% of the measured particle number (20–600 nm mobility diameter), and thus may have important implications for human health considering the size and composition of ship exhaust particles. The positive matrix factorisation procedure enabled a more refined interpretation of the single particle results by providing source contributions to PM2.5 mass, while the single particle data enabled the identification of additional factors not possible with typical semi-continuous measurements, including local shipping traffic

Observation of peripheral charge induced low frequency capacitance-voltage behaviour in metal-oxide-semiconductor capacitors on Si and GaAs substrates

We report on experimental observations of room temperature low frequency capacitance-voltage (CV) behaviour in metal oxide semiconductor (MOS) capacitors incorporating high dielectric constant (high-k) gate oxides, measured at ac signal frequencies (2 kHz to 1 MHz), where a low frequency response is not typically expected for Si or GaAs MOS devices. An analysis of the inversion regions of the CV characteristics as a function of area and ac signal frequency for both n and p doped Si and GaAs substrates indicates that the source of the low frequency CV response is an inversion of the semiconductor/high-k interface in the peripheral regions outside the area defined by the metal gate electrode, which is caused by charge in the high-k oxide and/or residual charge on the high-k oxide surface. This effect is reported for MOS capacitors incorporating either MgO or GdSiOx as the high-k layers on Si and also for Al2O3 layers on GaAs(111B). In the case of NiSi/MgO/Si structures, a low frequency CV response is observed on the p-type devices, but is absent in the n-type devices, consistent with positive charge (>8 x 10(10) cm(-2)) on the MgO oxide surface. In the case of the TiN/GdSiOx/Si structures, the peripheral inversion effect is observed for n-type devices, in this case confirmed by the absence of such effects on the p-type devices. Finally, for the case of Au/Ni/Al2O3/GaAs(111B) structures, a low-frequency CV response is observed for n-type devices only, indicating that negative charge (> 3 x 10(12) cm(-2)) on the surface or in the bulk of the oxide is responsible for the peripheral inversion effect. (C) 2012 American Institute of Physics. [http://dx.doi.org/10.1063/1.4729331

Expression of the RNA-binding protein RBM3 is associated with a favourable prognosis and cisplatin sensitivity in epithelial ovarian cancer

<p>Abstract</p> <p>Background</p> <p>We recently demonstrated that increased expression of the RNA-binding protein RBM3 is associated with a favourable prognosis in breast cancer. The aim of this study was to examine the prognostic value of RBM3 mRNA and protein expression in epithelial ovarian cancer (EOC) and the cisplatin response upon RBM3 depletion in a cisplatin-sensitive ovarian cancer cell line.</p> <p>Methods</p> <p>RBM3 mRNA expression was analysed in tumors from a cohort of 267 EOC cases (Cohort I) and RBM3 protein expression was analysed using immunohistochemistry (IHC) in an independent cohort of 154 prospectively collected EOC cases (Cohort II). Kaplan Meier analysis and Cox proportional hazards modelling were applied to assess the relationship between RBM3 and recurrence free survival (RFS) and overall survival (OS). Immunoblotting and IHC were used to examine the expression of RBM3 in a cisplatin-resistant ovarian cancer cell line A2780-Cp70 and its cisplatin-responsive parental cell line A2780. The impact of RBM3 on cisplatin response in EOC was assessed using siRNA-mediated silencing of RBM3 in A2780 cells followed by cell viability assay and cell cycle analysis.</p> <p>Results</p> <p>Increased RBM3 mRNA expression was associated with a prolonged RFS (HR = 0.64, 95% CI = 0.47-0.86, <it>p = 0.003</it>) and OS (HR = 0.64, 95% CI = 0.44-0.95, <it>p = 0.024</it>) in Cohort I. Multivariate analysis confirmed that RBM3 mRNA expression was an independent predictor of a prolonged RFS, (HR = 0.61, 95% CI = 0.44-0.84, <it>p = 0.003</it>) and OS (HR = 0.62, 95% CI = 0.41-0.95; <it>p = 0.028</it>) in Cohort I. In Cohort II, RBM3 protein expression was associated with a prolonged OS (HR = 0.53, 95% CI = 0.35-0.79, <it>p = 0.002</it>) confirmed by multivariate analysis (HR = 0.61, 95% CI = 0.40-0.92, <it>p = 0.017</it>). RBM3 mRNA and protein expression levels were significantly higher in the cisplatin sensitive A2780 cell line compared to the cisplatin resistant A2780-Cp70 derivative. siRNA-mediated silencing of RBM3 expression in the A2780 cells resulted in a decreased sensitivity to cisplatin as demonstrated by increased cell viability and reduced proportion of cells arrested in the G2/M-phase.</p> <p>Conclusions</p> <p>These data demonstrate that RBM3 expression is associated with cisplatin sensitivity <it>in vitro </it>and with a good prognosis in EOC. Taken together these findings suggest that RBM3 may be a useful prognostic and treatment predictive marker in EOC.</p

Structural analysis, elemental profiling, and electrical characterization of HfO2 thin films deposited on In0.53Ga0.47As surfaces by atomic layer deposition

In this work results are presented on the structural analysis, chemical composition, and interface state densities of HfO2 thin films deposited by atomic layer deposition (ALD) from Hf[N(CH3)(2)](4) and H2O on In0.53Ga0.47As/InP substrates. The structural and chemical properties are investigated using high resolution cross-sectional transmission electron microscopy and electron energy loss spectroscopy. HfO2 films (3-15 nm) deposited on In0.53Ga0.47As are studied following a range of surface treatments including in situ treatment of the In0.53Ga0.47As surface by H2S exposure at 50-350 degrees C immediately following the metal organic vapor phase epitaxy growth of the In0.53Ga0.47As layer, ex situ treatment with (NH4)(2)S, and deposition on the native oxides of In0.53Ga0.47As with no surface treatment. The structural analysis indicates that the In0.53Ga0.47As surface preparation prior to HfO2 film deposition influences the thickness of the HfO2 film and the interlayer oxide. The complete interfacial self-cleaning of the In(0.53)Gas(0.47)As native oxides is not observed using an ALD process based on the Hf[N(CH3)(2)](4) precursor and H2O. Elemental profiling of the HfO2/In0.53Ga0.47As interface region by electron energy loss spectroscopy reveals an interface oxide layer of 1-2 nm in thickness, which consists primarily of Ga oxides. Using a conductance method approximation, peak interface state densities in the range from 6 x 10(12) to 2 x 10(13) cm(-2) eV(-1) are estimated depending on the surface preparation. (C) 2009 American Institute of Physics. [doi:10.1063/1.3243234

Sources and mixing state of size-resolved elemental carbon particles in a European megacity: Paris

An Aerosol Time-Of-Flight Mass Spectrometer (ATOFMS) was deployed to investigate the size-resolved chemical composition of single particles at an urban background site in Paris, France, as part of the MEGAPOLI winter campaign in January/February 2010. ATOFMS particle counts were scaled to match coincident Twin Differential Mobility Particle Sizer (TDMPS) data in order to generate hourly size-resolved mass concentrations for the single particle classes observed. The total scaled ATOFMS particle mass concentration in the size range 150–1067 nm was found to agree very well with the sum of concurrent High-Resolution Time-of-Flight Aerosol Mass Spectrometer (HR-ToF-AMS) and Multi-Angle Absorption Photometer (MAAP) mass concentration measurements of organic carbon (OC), inorganic ions and black carbon (BC) (R2 = 0.91). Clustering analysis of the ATOFMS single particle mass spectra allowed the separation of elemental carbon (EC) particles into four classes: (i) EC attributed to biomass burning (ECbiomass), (ii) EC attributed to traffic (ECtraffic), (iii) EC internally mixed with OC and ammonium sulfate (ECOCSOx), and (iv) EC internally mixed with OC and ammonium nitrate (ECOCNOx). Average hourly mass concentrations for EC-containing particles detected by the ATOFMS were found to agree reasonably well with semi-continuous quantitative thermal/optical EC and optical BC measurements (r2 = 0.61 and 0.65–0.68 respectively, n = 552). The EC particle mass assigned to fossil fuel and biomass burning sources also agreed reasonably well with BC mass fractions assigned to the same sources using seven-wavelength aethalometer data (r2 = 0.60 and 0.48, respectively, n = 568). Agreement between the ATOFMS and other instrumentation improved noticeably when a period influenced by significantly aged, internally mixed EC particles was removed from the intercomparison. 88% and 12% of EC particle mass was apportioned to fossil fuel and biomass burning respectively using the ATOFMS data compared with 85% and 15% respectively for BC estimated from the aethalometer model. On average, the mass size distribution for EC particles is bimodal; the smaller mode is attributed to locally emitted, mostly externally mixed EC particles, while the larger mode is dominated by aged, internally mixed ECOCNOx particles associated with continental transport events. Periods of continental influence were identified using the Lagrangian Particle Dispersion Model (LPDM) "FLEXPART". A consistent minimum between the two EC mass size modes was observed at approximately 400 nm for the measurement period. EC particles below this size are attributed to local emissions using chemical mixing state information and contribute 79% of the scaled ATOFMS EC particle mass, while particles above this size are attributed to continental transport events and contribute 21% of the EC particle mass. These results clearly demonstrate the potential benefit of monitoring size-resolved mass concentrations for the separation of local and continental EC emissions. Knowledge of the relative input of these emissions is essential for assessing the effectiveness of local abatement strategies

The REFLECT Statement: Methods and Processes of Creating Reporting Guidelines for Randomized Controlled Trials for Livestock and Food Safety by Modifying the CONSORT Statement

The conduct of randomized controlled trials in livestock with production, health and food-safety outcomes presents unique challenges that may not be adequately reported in trial reports. The objective of this project was to modify the CONSORT (Consolidated Standards of Reporting Trials) statement to reflect the unique aspects of reporting these livestock trials. A 2-day consensus meeting was held on 18–19 November 2008 in Chicago, IL, USA, to achieve the objective. Prior to the meeting, a Web-based survey was conducted to identify issues for discussion. The 24 attendees were biostatisticians, epidemiologists, food-safety researchers, livestock-production specialists, journal editors, assistant editors and associate editors. Prior to the meeting, the attendees completed a Web-based survey indicating which CONSORT statement items may need to be modified to address unique issues for livestock trials. The consensus meeting resulted in the production of the REFLECT (Reporting Guidelines for Randomized Control Trials) statement for livestock and food safety and 22-item checklist. Fourteen items were modified from the CONSORT checklist and an additional sub-item was proposed to address challenge trials. The REFLECT statement proposes new terminology, more consistent with common usage in livestock production, to describe study subjects. Evidence was not always available to support modification to or inclusion of an item. The use of the REFLECT statement, which addresses issues unique to livestock trials, should improve the quality of reporting and design for trials reporting production, health and food-safety outcomes

Quantitative determination of carbonaceous particle mixing state in Paris using single-particle mass spectrometer and aerosol mass spectrometer measurements

Single-particle mixing state information can be a powerful tool for assessing the relative impact of local and regional sources of ambient particulate matter in urban environments. However, quantitative mixing state data are challenging to obtain using single-particle mass spectrometers. In this study, the quantitative chemical composition of carbonaceous single particles has been determined using an aerosol time-of-flight mass spectrometer (ATOFMS) as part of the MEGAPOLI 2010 winter campaign in Paris, France. Relative peak areas of marker ions for elemental carbon (EC), organic aerosol (OA), ammonium, nitrate, sulfate and potassium were compared with concurrent measurements from an Aerodyne high-resolution time-of-flight aerosol mass spectrometer (HR-ToF-AMS), a thermal-optical OCEC analyser and a particle into liquid sampler coupled with ion chromatography (PILS-IC). ATOFMS-derived estimated mass concentrations reproduced the variability of these species well (R-2 = 0.67-0.78), and 10 discrete mixing states for carbonaceous particles were identified and quantified. The chemical mixing state of HR-ToF-AMS organic aerosol factors, resolved using positive matrix factorisation, was also investigated through comparison with the ATOFMS dataset. The results indicate that hydrocarbon-like OA (HOA) detected in Paris is associated with two EC-rich mixing states which differ in their relative sulfate content, while fresh biomass burning OA (BBOA) is associated with two mixing states which differ significantly in their OA/EC ratios. Aged biomass burning OA (OOA(2)-BBOA) was found to be significantly internally mixed with nitrate, while secondary, oxidised OA (OOA) was associated with five particle mixing states, each exhibiting different relative secondary inorganic ion content. Externally mixed secondary organic aerosol was not observed. These findings demonstrate the range of primary and secondary organic aerosol mixing states in Paris. Examination of the temporal behaviour and chemical composition of the ATOFMS classes also enabled estimation of the relative contribution of transported emissions of each chemical species and total particle mass in the size range investigated. Only 22% of the total ATOFMS-derived particle mass was apportioned to fresh, local emissions, with 78% apportioned to regional/continental-scale emissions. Single-particle mixing state information can be a powerful tool for assessing the relative impact of local and regional sources of ambient particulate matter in urban environments. However, quantitative mixing state data are challenging to obtain using single-particle mass spectrometers. In this study, the quantitative chemical composition of carbonaceous single particles has been determined using an aerosol time-of-flight mass spectrometer (ATOFMS) as part of the MEGAPOLI 2010 winter campaign in Paris, France. Relative peak areas of marker ions for elemental carbon (EC), organic aerosol (OA), ammonium, nitrate, sulfate and potassium were compared with concurrent measurements from an Aerodyne high-resolution time-of-flight aerosol mass spectrometer (HR-ToF-AMS), a thermal-optical OCEC analyser and a particle into liquid sampler coupled with ion chromatography (PILS-IC). ATOFMS-derived estimated mass concentrations reproduced the variability of these species well (R-2 = 0.67-0.78), and 10 discrete mixing states for carbonaceous particles were identified and quantified. The chemical mixing state of HR-ToF-AMS organic aerosol factors, resolved using positive matrix factorisation, was also investigated through comparison with the ATOFMS dataset. The results indicate that hydrocarbon-like OA (HOA) detected in Paris is associated with two EC-rich mixing states which differ in their relative sulfate content, while fresh biomass burning OA (BBOA) is associated with two mixing states which differ significantly in their OA/EC ratios. Aged biomass burning OA (OOA(2)-BBOA) was found to be significantly internally mixed with nitrate, while secondary, oxidised OA (OOA) was associated with five particle mixing states, each exhibiting different relative secondary inorganic ion content. Externally mixed secondary organic aerosol was not observed. These findings demonstrate the range of primary and secondary organic aerosol mixing states in Paris. Examination of the temporal behaviour and chemical composition of the ATOFMS classes also enabled estimation of the relative contribution of transported emissions of each chemical species and total particle mass in the size range investigated. Only 22% of the total ATOFMS-derived particle mass was apportioned to fresh, local emissions, with 78% apportioned to regional/continental-scale emissions

Dose-limiting, adverse event-associated bradycardia with β-blocker treatment of atrial fibrillation in the GENETIC-AF trial

Background: Heart failure (HF) patients with atrial fibrillation (AF) often have conduction system disorders, which may be worsened by β-blocker therapy.Objective: In a post hoc analysis we examined the prevalence of bradycardia and its association with adverse events (AEs) and failure to achieve target dose in the GENETIC-AF trial.Methods: Patients randomized to metoprolol (n = 125) or bucindolol (n = 131) entering 24-week efficacy follow-up and receiving study medication were evaluated. Bradycardia was defined as an electrocardiogram (ECG) heart rate (HR) &lt;60 beats per minute (bpm) and severe bradycardia &lt;50 bpm.Results: Mean HR in sinus rhythm (SR) was 62.6 ± 12.5 bpm for metoprolol and 68.3 ± 11.1 bpm for bucindolol (P &lt; .0001), but in AF HRs were not different (87.5 bpm vs 89.7 bpm, respectively). Episodes per patient for bucindolol vs metoprolol were 0.82 vs 2.08 (P &lt; .001) for bradycardia and 0.24 vs 0.57 for severe bradycardia (P &lt; .001), with 98.9% of the episodes occurring in SR. Patients experiencing bradycardia had a 4.15-fold higher prevalence of study medication dose reduction (P &lt;.0001) compared to patients without bradycardia. Fewer patients receiving metoprolol were at target dose (61.7% vs 74.9% for bucindolol, P &lt; .0001) at ECG recordings, and bradycardia AEs were more prevalent in the metoprolol group (13 vs 1 for bucindolol, P = .001). On multivariate analysis of 21 candidate bradycardia predictors including presence of a device with pacing capability, bucindolol treatment was associated with the greatest degree of prevention (Zodds ratio -4.24, P &lt; .0001).Conclusion: In AF-prone HF patients bradycardia may limit the effectiveness of β blockers, and this property is agent-dependent.</p