5 research outputs found
Aethalometer measurements in a road tunnel: A step forward in the characterization of black carbon emissions from traffic
[EN] A sampling campaign was conducted in the Liberdade Avenue tunnel (Braga, Portugal) during a week (with 56,000 vehicles) to monitor black carbon (eBC-equivalent black carbon) by means of an Aethalometer AE-31, and gaseous pollutants (CO2, CO, NOx). Inside the tunnel, the mean eBC mass concentration was 21 ± 10 μg m−3, reaching a maximum hourly value of 49.0 μg m−3. An hourly and weekday-weekend study was carried out. Regarding the Absorption Ångström exponent (AAE), a mean value of 0.97 ± 0.10 was obtained, for a source of practically pure traffic. There was a positive significant correlation between eBC and the number of light vehicles (r = 0.47; p < 0.001) and between eBC and the gaseous emissions: CO (r = 0.67; p < 0.001), CO2 (r = 0.71; p < 0.001), NO (r = 0.63; p < 0.001) and NO2 (r = 0.70; p < 0.001). The mean black carbon emission factors (EFBC) inside the tunnel were 0.31 ± 0.08 g (kg fuel)−1 and 0.11 ± 0.08 mg veh−1 km−1, similar to those found in other studies for gasoline and diesel vehicles in road tunnelsSIPortuguese Science Foundation through the project “Source apportionment of URBan Emissions of primary particulate matter”, PTDC/AAC-AMB/117956/2010 (URBE). Special thanks are given to the Braga City Council, Municipal Police and University of Minho for all the logistic support. F. Oduber and C. del Blanco Alegre acknowledge the grants BES-2015-074473 and FPU16/05764 from the Spanish Ministry of Economy and Competitiveness and the Spanish Ministry of Education, Culture and Sports, respectively. This study was partially supported by the University of León (Programa Propio 2018/00203/001) and the AERORAIN project (Ministry of Economy and Competitiveness, Grant CGL2014-52556-R, co-financed with FEDER funds). Data treatment was carried out within the project “SOPRO - Chemical and toxicological SOurce PROfiling of particulate matter in urban air”, POCI-01-0145-FEDER-029574, funded by FEDER, through COMPETE2020 - Programa Operacional Competitividade e Internacionalização (POCI), and by Portuguese funds (OE), through FCT/MCTE
Characterization of aerosol sources in León (Spain) using Positive Matrix Factorization and weather types
[EN] A one-year aerosol sampling campaign, between 2016 and 2017, was conducted in a suburban area of León city, Spain. An association between the Positive Matrix Factorization (PMF) results and air masses through circulation weather types was carried out, through the construction of linear models from the PM10 concentrations and its chemical composition. The aerosol sources, identified by PMF six-factor solution, were: traffic (29%), aged sea salt (26%), secondary aerosols (16%), dust (13%), marine aerosol (7%) and biomass burning (3%). Traffic and secondary factors showed the highest PM10 contribution in the hybrid cyclonic types with wind component from the first and second quadrant. Anticyclonic types with wind component from the first quadrant exhibited high values of secondary, aged sea salt and dust factors. The highest contributions of the dust factor were also associated with northerly types. The linear models built for estimating the source apportionment of PM10, from aerosol chemical composition and geostrophic flow, showed positive coefficients for: westerly flows (WF) in marine factor, southerly flows (SF) in secondary and traffic factors, and shear southerly vorticities (ZS) in dust factor. Negative dependences were observed for ZS in aged sea salt factor and for SF in dust factor. The PM10 mass concentration calculated by the linear models and by the PMF model were strongly correlated. This can be very useful to determine the contribution of a specific source to PM10 in León, only by knowing some meteorological and chemical variablesSIThis study was partially supported by the Spanish Ministry of Economy and Competitiveness (Grant TEC2014-57821-R), the University of León (Programa Propio 2015/00054/001 and 2018/00203/001) and the AERORAIN project (Ministry of Economy and Competitiveness, Grant CGL2014-52556-R, co-financed with European FEDER funds). F. Oduber acknowledges the grant BES-2015-074473 from the Spanish Ministry of Economy and Competitiveness. C. Blanco-Alegre acknowledges the grant FPU16-05764 from the Spanish Ministry of Education, Culture and Sport. Thanks are also due for the financial support to CESAM (UIDB/50017/2020+UIDP/50017/2020), to FCT/MCTES through national funds, and the co-funding by the FEDER, within the PT2020 Partnership Agreement and Compete 202
Impact of vacuum cleaning on indoor air quality
[EN] Vacuum cleaning can be a household source of particulate matter (PM) both from the vacuum motor and from settled dust resuspension. Despite the evidence of this contribution to PM levels indoors, the effect of this source on PM composition is still unknown. In this study, four vacuum cleaners (washable filter bag less, wet, bagged and HEPA filter equipped robot) were tested for the emission rate of particulate mass and number. The detailed PM chemical characterisation included organic and elemental carbon, metals and organic speciation. PM10 emission rates from bagged vacuum operation were much higher (207 ± 99.0 μg min−1) compared with the ones obtained from wet (86.1 ± 16.9 μg min−1) and washable filter bag less vacuums (75.4 ± 7.89 μg min−1). Particle (8–322 nm) number emission rates ranged from 5.29 × 1011 (washable filter bag less vacuum) to 21.2 × 1011 (wet vacuum) particles min−1. Ratios of peak to background levels indicate that vacuuming can elevate the ultrafine particle number concentrations by a factor ranging from 4 to 61. No increase in PM mass or number concentrations was observed during the HEPA filter equipped vacuum operation. The increase in copper and elemental carbon PM10 contents during vacuuming suggested motor emissions. Organic compounds in PM10 included alkanes, PAHs, saccharides, phenolics, alcohols, acids, among others. However, it was not possible to establish a relationship between these compounds and vacuuming due to the vast array of possible household sources. The cancer risks associated with metals and PAH inhalation were negligibleSIThe sampling campaign was partially supported by the Spanish Ministry of Economy and Competitiveness (Grant TEC2014-57821-R), the University of León (Programa Propio 2015/00054/001 and 2018/00203/001) and the AERORAIN Project (Ministry of Economy and Competitiveness, Grant CGL2014-52556-R, co-financed with European FEDER Funds). Other part of the monitoring campaign and the analytical determinations of this work were funded by the project “Chemical and toxicological SOurce PROfiling of particulate matter in urban air (SOPRO)”, POCI-01-0145-FEDER-029574, supported by FEDER, through COMPETE2020 - Programa Operacional Competitividade e Internacionalização (POCI), and by National Funds (OE), through FCT/MCTES. An acknowledgment is due to the Portuguese Foundation of Science and Technology (FCT) and to the POHP/FSE Funding Programme for the fellowships with the references SFRH/BD/117993/2016 and SFRH/BPD/123176/2016. Ana Vicente is subsidised by national funds (OE), through FCT, I.P., in the framework contract foreseen in the numbers 4, 5 and 6 of article 23, of the Decree-Law 57/2016, of August 29, changed by Law 57/2017, of July 19. Thanks are due, for the financial support to CESAM (UIDB/50017/2020+UIDP/50017/2020), to FCT/MEC through national funds, and the co-funding by the FEDER, within the PT2020 Partnership Agreement and Compete 2020. F. Oduber and C. Blanco-Alegre acknowledge the grants BES-2015-074473 and FPU16-05764 from the Spanish Ministry of Economy and Competitiveness and from the Ministry of Education, Culture and Sports, Spain, respectively
Unusual winter Saharan dust intrusions at Northwest Spain: Air quality, radiative and health impacts
[EN] Saharan air masses can transport high amounts of mineral dust particles and biological material to the Iberian Peninsula. During winter, this kind of events is not very frequent and usually does not reach the northwest of the Peninsula. However, between 21 and 22 February 2016 and between 22 and 23 February 2017, two exceptional events were registered in León (Spain), which severely affected air quality. An integrative approach including: i) typical synoptic conditions; ii) aerosol chemical composition; iii) particle size distributions; iv) pollen concentration; v) aerosol optical depth (AOD); vi) radiative forcing and vii) estimation of the impact of aerosols in the respiratory tract, was carried out. In the global characterization of these events, the exceedance of the PM10 daily limit value, an increase in the coarse mode and a rise in the iron concentration were observed. On the 2016 event, an AOD and extinction-related Ångström exponent clearly characteristic of desert aerosol (1.1 and 0.05, respectively) were registered. Furthermore, pollen grains not typical of flowering plants in this period were identified. The chemical analysis of the aerosol from the 2017 event allowed us to confirm the presence of the main elements associated with mineral sources (aluminum, calcium, and silica concentrations). An increase in the SO42−, NO3− and Cl− concentrations during the Saharan dust intrusion was also noted. However, in this event, there was no presence of atypical pollen types. The estimated dust radiative forcing traduced a cooling effect for surface and atmosphere during both events, corroborated by trends of radiative flux measurements. The estimated impact on the respiratory tract regions of the high levels of particulate matter during both Saharan dust intrusions showed high levels for the respirable fractionSIThis study was partially supported by the Spanish Ministry of Economy and Competitiveness (Grant TEC2014-57821-R), the University of León (Programa Propio 2015/00054/001 and 2018/00203/001) and the AERORAIN project (Ministry of Economy and Competitiveness, Grant CGL2014-52556-R, co-financed with European FEDER funds). F. Oduber acknowledges the grant BES-2015-074473 from the Spanish Ministry of Economy and Competitiveness. C. Blanco-Alegre acknowledges the grant FPU16-05764 from the Ministry of Education, Culture and Sports, Spain. The authors gratefully acknowledge the NOAA Air Resources Laboratory (ARL) for the provision of the HYSPLIT transport and dispersion model and/or READY website (http://www.ready.noaa.gov) used in this study. The authors would also like to express their gratitude to the Naval Research Laboratory for providing the NAAP aerosol map and NASA for the satellite image used in the graphical abstract. The data from the MAPAMA network are property of the Office for Quality and Environmental Evaluation (DGCEA, in its Spanish acronym), belonging to the Ministry of Ecologic Transition. The data were supplied as a result of an agreement between the Spanish Ministry of Agriculture, Food and the Environment and the Scientific Research Council for sponsoring studies related to air pollution by particulate matter and metals in Spain. We thank AERONET network and specially Victoria E. Cachorro Revilla and Carlos Toledano for establishing and maintaining the Valladolid AERONET site used in this investigation. We also thank to Philippe Dubuisson for allowing the use of GAME model, as well as the Laboratoire d'Optique Atmosphérique (University of Lille
Indoor PM from residential coal combustion: levels, chemical composition, and toxicity
[EN] Indoor air quality is crucial for human health due to the significant time people spend at home, and it is mainly affected by internal sources such as solid fuel combustion for heating. This study investigated the indoor air quality and health implications associated with residential coal burning covering gaseous pollutants (CO, CO2 and total volatile organic compounds), particulate matter, and toxicity. The PM10 chemical composition was obtained by ICP-MS/OES (elements), ion chromatography (water-soluble ions) and thermal-optical analysis (organic and elemental carbon). During coal combustion, PM10 levels were higher (up to 8.8 times) than background levels and the indoor-to-outdoor ratios were, on average, greater than unity, confirming the existence of a significant indoor source. The chemical characterisation of PM10 revealed increased concentrations of organic carbon and elemental carbon during coal combustion as well as arsenic, cadmium and lead. Carcinogenic risks associated with exposure to arsenic exceeded safety thresholds. Indoor air quality fluctuated during the study, with varying toxicity levels assessed using the Aliivibrio fischeri bioluminescence inhibition assay. These findings underscore the importance of mitigating indoor air pollution associated with coal burning and highlight the potential health risks from long-term exposure. Effective interventions are needed to improve indoor air quality and reduce health risks in coal-burning householdsSIThis work was partially supported by the Junta de Castilla y Leon co-financed with European FEDER funds (Grant LE025P20). It was also in part supported by the AEROHEALTH project (Ministry of Science and Innovation, co-financed with European FEDER funds, Grant PID2019-106164RBI00). Furthermore, it is part of the project TED2021-132292B-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union “NextGenerationEU”/PRTR. The financial support to CESAM by FCT/MCTES (UIDP/50017/2020 + UIDB/50017/2020 + LA/P/0094/2020), through national funds, is also acknowledged. FCT is also acknowledged for the research contract under Scientific Employment Stimulus to Estela D. Vicent