783 research outputs found
Stable path planning for reconfigurable robots over uneven terrains
University of Technology Sydney. Faculty of Engineering and Information Technology.Autonomous mobile robots are required to find safe and feasible routes in the environment when operating over challenging terrains. The most influential tip-over stability measures are based on two criteria; the robotās centre of mass (CM) and the support polygon defined by the convex area spanned between the ground contact points. The force angle (FA) stability margin is employed in this work given its widespread use and simple geometric interpretation.
A method to compute the contact points between a tracked robot and rugged terrain and predict robotās stability axes on 3D meshed maps reconstructed from 3D point clouds using the open dynamics engine (ODE) is presented. The validity and the need for stability computations based on the proposed contact points prediction algorithm is established through experiments over two common indoor obstacles i.e. ramps and stairs.
An analytical strategy to generate stable paths for reconfigurable robots whilst also meeting additional navigational objectives is hereby proposed. The suggested solution looks at minimizing the length of the traversed path and the energy expenditure in changing postures, and also accounts for additional constraints in terms of sensor visibility and traction.
A statistical analysis of stability prediction to account for the uncertainties associated with the actual robotās dynamic model, its localisation in the ground, and the terrain models is introduced. Probability density function (PDF) of contact points, CM and the FA stability measure are numerically estimated, with simulation results performed on the ODE simulator based on uncertain parameters. Two techniques are presented: a conventional standard Monte Carlo (SMC) scheme, and a structured unscented transform (UT) which results in significant improvement in computational efficiency.
A novel probabilistic stability criterion derived from the cumulative distribution of the FA margin is introduced that allows a safety constraint to be dynamically updated by available sensor data as it becomes available. The advantages of planning with probabilistic stability is demonstrated using a grid based A* algorithm as well as a sampling based RRT planner. The validity of the proposed approach is evaluated with a multi-tracked robot fitted with a manipulator arm and a range camera using two challenging 3D terrains data sets: one obtained whilst operating the robot in a mock-up urban search and rescue arena, and a second one from a publicly available on-line data from a quasi-outdoor rover testing facility
Cross-species amplification of Clupeidae microsatellite DNA markers in common kilka, Clupeonella cultriventris from the Caspian Sea
Common kilka Clupeonella cultriventris (Nordmann, 1840) is a brackish water and small pelagic fish species and is one of the most abundant fishes that live gregariously in the Caspian Sea. A total of 60 specimens of adult common kilka were sampled from two seasons. Fifteen pairs of microsatellites previously developed for A. sapidissima, C. pallasi, C. harengus, and S. pilchardus were tested for cross-species amplification on the common kilka. In this study, only five primer pairs were used successfully. Analyses revealed that the average of alleles per locus was 14.4. The average observed and expected heterozygosity was 0.153 and 0.888, respectively. All loci significantly deviated from HāW equilibrium. These results together with significant Rst. values for genotypic differences support the existence of different genetic populations along the Caspian Sea coast (Guilan Province)
Application of microsatellite markers to study the genetic structure of stellate sturgeon populations (Acipenser stellatus Pallas, 1771) in the south Caspian Sea
Population genetic structure of stellate sturgeon (Acipenser stellatus) in 197 adult specimens from four fishery regions along the Iranian coastline of the southern Caspian Sea was investigated using microsatellite markers. Out of 15 microsatellite primers, 11 loci were produced, in which 10 of them were polymorphic and 1 was monomorph. Totally, 184 alleles were identified and on average 13.1 alleles per locus were found (ranged 8 to 18 alleles). All sampled regions contained unique alleles. Average observed and expected heterozygosity was 0.667 and 0.854, respectively and significant genetic differences between 4 regions were observed (pā¤0.01). Deviations from Hardy-Weinberg equilibrium were found in most cases. Population differentiation test was modest and significant (pā¤0.01). Based on FST estimate (pā¤0.01), more than one population of stellate sturgeon is identified in the south Caspian Sea. Therefore, fishery management for restocking and conservation of gene pool is highly recommended
Morphometric and meristic variations in bream (Abramis brama orientalis, Berg, 1949) during larval development
This study was conducted to examine morphometric and meristic characteristics alongside pigmentation patterns of bream larvae, Abramis brama orientalis, in four stages of larval development. Morphological characters including total length (TL), standard length (SL), notochord length (NL), head length (HL), head depth (HD), eye diameter (ED) and mouth width (MW) were examined from hatching time through 30 days after hatching (DAH). The results showed morphometric variations in the different larval stages. Growth and development of fins occurred mainly at the Post Flexion stage with the completion of caudal fin at 9 mm TL and pelvic fin at 13.33 mm TL. At all larval stages, the highest concentration of pigments was seen on dorsal, ventral and somewhat on the lateral sides of body in descending order. The highest density of melanophores at larvae yolk sac stage was observed on the yolk sac and the back of head zone, while at preflexion and flexion stages melanophores were dominant on the back of head and on the skin folds which resulted from yolk absorption. At post flexion stage, high density of melanophores was found on the back of the head, bases of fins and caudal fin, while less concentrations of these cells were evident on the lateral sides of fish' body. In conclusion, a clear change in the growth and main morphological characters were observed in postflexion stage. This may be due to the main development of fins, which would suggest enhanced swimming capabilities and also prey capture efficiencies
A statistical approach for uncertain stability analysis of mobile robots
Stability prediction is an important concern for mobile robots operating in rough environments. Having the capacity to predict areas of instability means pro-actively being able to plan safer traversable paths. The most influential tip-over stability measures are based on two criteria, the robot's center of mass (CM) and the supporting polygon (SP) defined by the convex area spanned between the ground contact-points. However, there is significant uncertainty associated with many parameters in the planning pipe-line: the actual robot kino-dynamic model, its localisation in the ground, and the terrain models, particularly in uneven terrain. This article proposes a statistical analysis of stability prediction to account for some of the uncertainties. This is accomplished using the force angle (FA) stability measure for a reconfigurable multi-tracked vehicle fitted with flippers, a manipulator arm and a sensor head. Probability density function (PDF) of contact-points, CM and the FA stability measure are numerically estimated, with simulation results performed on the open dynamics engine (ODE) simulator based on uncertain parameters. Two techniques are presented: a conventional Monte Carlo scheme, and a structured unscented transform (UT) which results in significant improvement in computational efficiency. Experimental results on maps obtained from a range camera fitted on the sensor head while the robot traverses over a ramp and a series of steps are presented that confirms the validity of the proposed probabilistic stability prediction method. Ā© 2013 IEEE
Exact analysis of heat convection in viscoelastic FENE-P fluids through isothermal slits and tubes
In this article, two exact analytical solutions for heat convection in viscoelastic fluid flow through isothermal tubes and slits are presented for the first time. Herein, a Peterlin type of finitely extensible nonlinear elastic (FENE-P) model is used as the nonlinear constitutive equation for the viscoelastic fluid. Due to the eigenvalue form of the heat transfer equation, the modal analysis technique has been used to determine the physical temperature distributions. The closed form solution for the temperature profile is obtained in terms of a Heun Tri-confluent function for slit flow and then the Frobenius method is used to evaluate the temperature distribution for the tube flow. Based on these solutions, the effects of extensibility parameter and Deborah number on thermal convection in FENE-P fluid flow have been studied in detail. The fractional correlations for reduced Nusselt number in terms of material modulus are also derived. Here, it is shown that by increasing the Deborah number from 0 to 100, the Nusselt number is enhanced by 8.5% and 13.5% for slit and tube flow, respectively
Planning stable and efficient paths for articulated mobile robots on challenging terrains
An analytical strategy to generate stable paths for a reconfigurable vehicle while also meeting additional navigational objectives is herein proposed. The work is motivated by robots traversing over challenging terrains during search and rescue operations, such as those equipped with manipulator arms and/or flippers. The proposed solution looks at minimizing the length of the traversed path and the energy expenditure in changing postures, yet also accounts for additional constraints in terms of sensor visibility (i.e arm configurations close to those orthogonal to the horizontal global plane which can afford a wider sensor view) and traction (i.e. flipper angles that provide the largest trackterrain interaction area). The validity of the proposed planning approach is evaluated with a multitracked robot fitted with flippers and a range camera at the end of a manipulator arm while navigating over two challenging 3D terrain data sets: one in a mock-up urban search and rescue arena (USAR), and a second one from a publicly available quasi-outdoor rover testing facility (UTIAS)
Evaluation of anti-inflammatory and analgesic activity of the extract and fractions of Astragalus hamosus in animal models
The objective of this study was to evaluate the anti-inflammatory and analgesic activities of the hydro-alcoholic extract of the pods of Astragalus hamosus (HAAH), a plant used in Iranian traditional medicine, and antinociceptive effects of different fractions in animal models. The anti-inflammatory effect was evaluated by the rat paw edema induced by formalin. Also the analgesic effect was examined by the acetic-acid-induced writhing response and hot plate test. The analgesic effects of chloroform, hexane, ethyl acetate and aqueous fractions were evaluated by the hot-plate method. The hydroalcoholic extract of Astragalus hamosus could reduce the edema in a dose-dependent manner (P<0.05). In the acute phase, the result of 1000 mg/Kg and in the chronic phase, the result of 100 and 300 mg/Kg of the extract were more significant and comparable with the effect of sodium salicylate. Also application of different doses of HAAH had significant anti-nociceptive effects on both animal models. The findings showed that HAAH at doses of 700 and 1000 mg/Kg produced analgesic effects comparable to sodium salicylate. The hexane and ethyl acetate (but not the other fractions) showed significant analgesic activity in hot plate test, when compared to morphine. The results of this study demonstrated the anti-inflammatory and analgesic effects of HAAH extract and hexane and ethyl acetate fractions of the extract in animal models and justify traditional use of this plant in the treatment of pain and inflammatory conditions. More studies to clarify the active components are necessary. ĆĀ© 2015 by School of Pharmacy Shaheed Beheshti University of Medical Sciences and Health Services
Probabilistic stable motion planning with stability uncertainty for articulated vehicles on challenging terrains
Ā© 2015, Springer Science+Business Media New York. A probabilistic stable motion planning strategy applicable to reconfigurable robots is presented in this paper. The methodology derives a novel statistical stability criterion from the cumulative distribution of a tip-over metric. The measure is dynamically updated with imprecise terrain information, localization and robot kinematics to plan safety-constrained paths which simultaneously allow the widest possible visibility of the surroundings by simultaneously assuming highest feasible vantage robot configurations. The proposed probabilistic stability metric allows more conservative poses through areas with higher levels of uncertainty, while avoiding unnecessary caution in poses assumed at well-known terrain sections. The implementation with the well known grid based A* algorithm and also a sampling based RRT planner are presented. The validity of the proposed approach is evaluated with a multi-tracked robot fitted with a manipulator arm and a range camera using two challenging elevation terrains data sets: one obtained whilst operating the robot in a mock-up urban search and rescue arena, and the other from a publicly available dataset of a quasi-outdoor rover testing facility
- ā¦