In-situ measurements of fatigue damage evolution by electrical resistance method

Fatigue damage is one of the main failure mechanisms of structures. In the present work Electrical Resistance Changes (ERC) were measured during fatigue tests on notched carbon steel specimens. ERC measurements were performed by monitoring the change in electrical resistance in real-time without interrupting the test at various pre-selected time intervals. The temperature of the specimens was also on-line monitored during the test in order to deduce its effect on the electrical resistance. The comparison of the resistance data measured at initial and different phases of fatigue tests showed the existence of temporal variations associated to fatigue damage: in particular the resistance first decreases, in the initial stages of loading, and subsequently, starting approximately from half-life presents an increase with the number of load cycles due to the internal micro-damage’s accumulation. In the final stages of the fatigue test, prior the final fracture, it increases rapidly, in the propagation phase of the crack. In conclusion, the applied experimental method proved to be valid for studying the evolution of damage and to predict and evaluate fatigue life effectively

Two algorithms for fast 2D node generation: application to RBF meshless discretization of diffusion problems and image halftoning

Mesh generation techniques for traditional mesh based numerical approaches such as FEM and FVM have now reached a good degree of maturity. There is no such an acknowledged background when dealing with node generation techniques for meshless numerical approaches, despite their theoretical simplicity and efficiency; furthermore node generation can be put in connection with some well-known image approximation techniques. Two node generation algorithms are here proposed and employed in the numerical solution of 2D steady state diffusion problems by means of a local Radial Basis Function (RBF) meshless method. Finally, such algorithms are also tested for greyscale image approximation through stippling

Accurate Stabilization Techniques for RBF-FD Meshless Discretizations with Neumann Boundary Conditions

A major obstacle to the application of the standard Radial Basis Function-generated Finite Difference (RBF-FD) meshless method is constituted by its inability to accurately and consistently solve boundary value problems involving Neumann boundary conditions (BCs). This is also due to ill-conditioning issues affecting the interpolation matrix when boundary derivatives are imposed in strong form. In this paper these ill-conditioning issues and subsequent instabilities affecting the application of the RBF-FD method in presence of Neumann BCs are analyzed both theoretically and numerically. The theoretical motivations for the onset of such issues are derived by highlighting the dependence of the determinant of the local interpolation matrix upon the boundary normals. Qualitative investigations are also carried out numerically by studying a reference stencil and looking for correlations between its geometry and the properties of the associated interpolation matrix. Based on the previous analyses, two approaches are derived to overcome the initial problem. The corresponding stabilization properties are finally assessed by succesfully applying such approaches to the stabilization of the Helmholtz-Hodge decomposition

Thermomechanical analysis of riveted carbon fiber laminates for aerospace applications

none3noExperimental fatigue tests performed on riveted carbon fiber laminates showed that the specimens, after some thousands of cycles, heated up, reaching around the rivet holes high temperatures. These temperatures if not properly controlled could be detrimental for the joint health. In order to understand the relative importance of all the mechanical and geometric parameters involved in the joint manufacturing, a numerical model of the joined carbon fiber laminates was developed using a commercial finite elements code. A simplified analytical model of heat transfer was then used to simulate the rivets thermal behavior under the assigned operating conditions: this model allowed comparisons with finite elements and can be used for simple thermal simulations. The numerical and analytical results were found in a good agreement with the available experimental results. The present research conclusions can be used for drawing better design rules in the definition of riveted carbon fiber laminates.openScarselli G.; Carrino S.; Nobile R.Scarselli, G.; Carrino, S.; Nobile, R

Numerical and experimental validation of SMArt thermography for the inspection of wind blade composite laminate

none3noAn innovative active thermography technique is proposed for the inspection of typical wind blade material. The proposed technique is based on the use of a multifunctional material obtained adding a grid of Shape Memory Alloy wires, which would serve also as a protection against lightning, to a traditional glass fibre composite panel. This technique, called SMArt thermography, which exploits the SMA wires as internal heat sources, has been compared to a traditional pulsed thermography in the case of a representative panel of unidirectional glass fibre and epoxy matrix with embedded SMA wires and artificial defects. The experimental results of the two techniques are reported and compared to the result of a numerical FEM transient model, in order to establish the reliability and the detectability limit of the proposed technique. The FEM model has been proven to be a useful tool for the definition of the multifunctional material at a design stage.openMarta De Giorgi; Riccardo Nobile; Andrea SaponaroDE GIORGI, Marta; Nobile, Riccardo; Saponaro, Andre

kf Evaluation in GFRP Composites by Thermography

Since the presence of a notch in a mechanical component causes a reduction in the fatigue strength, it is important to know the kf value for a given notch geometry and material. This parameter is fundamental in the fatigue design of aeronautical components that are mainly made of composites. kf is available in the literature for numerous types of notch but only for traditional materials such as metals. This paper presents a new practice, based on thermographic data, for the determination of the fatigue notch coefficient kf in composite notched specimens. The innovative aspect of this study is therefore to propose the application on composite materials of a new thermographic procedure to determine kf for several notch geometries: circular, U and V soft and severe notches. It was calculated, for each type of notch, as the ratio between the fatigue limits obtained on the cold and hot zone corresponding to the smooth and notched specimen, respectively. Consequently, this research activity provides, for the first time, a little database of kf for two particular typologies of composite materials showing a fast way to collect further values for different laminates and notch geometries

Colloidal Magnetic Heterostructured Nanocrystals with Asymmetric Topologies: Seeded-Growth Synthetic Routes and Formation Mechanisms

Colloidal inorganic nanocrystals, free-standing crystalline nanostructures generated and processed in solution phase, represent an important class of advanced nanoscale materials owing to the flexibility with which their physical–chemical properties can be controlled through synthetic tailoring of their compositional, structural and geometric features and the versatility with which they can be integrated in technological fields as diverse as optoelectronics, energy storage/ conversion/production, catalysis and biomedicine. In recent years, building upon mechanistic knowledge acquired on the thermodynamic and kinetic processes that underlie nanocrystal evolution in liquid media, synthetic nanochemistry research has made impressive advances, opening new possibilities for the design, creation and mastering of increasingly complex “colloidal molecules”, in which nanocrystal modules of different materials are clustered together via solid-state bonding interfaces into free-standing, easily processable multifunctional nanocomposite systems. This Review will provide a glimpse into this fast-growing research field by illustrating progress achieved in the wet-chemical development of last-generation breeds of all-inorganic heterostructured nanocrystals (HNCs) in asymmetric non-onionlike geometries, inorganic analogues of polyfunctional organic molecules, in which distinct nanoscale crystalline modules are interconnected in hetero-dimer, hetero-oligomer and anisotropic multidomain architectures via epitaxial heterointerfaces of limited extension. The focus will be on modular HNCs entailing at least one magnetic material component combined with semiconductors and/or metals, which hold potential for generating enhanced or unconventional magnetic properties, while offering diversified or even new chemical-physical properties and functional capabilities. The available toolkit of synthetic strategies, all based on the manipulation of seeded-growth techniques, will be described, revisited and critically interpreted within the framework of the currently understood mechanisms of colloidal heteroepitaxy

CFRP Fatigue Damage Detection by Thermal Methods

none3In this work, the fatigue damage of CFRP uniaxial composite specimens were studied using thermal methods to determine the fatigue behavior. The aim was to evaluate the fatigue damage as a function of the number of cycles. Consequently, the damage process was studied in terms of a global indicator, considering the stiffness decay, and in terms of local parameters, considering the evolution of temperature maps acquired during the fatigue tests. A direct correlation between the damage index, corresponding to 90% of the fatigue life, and the temperature variation of the most stressed area was found. Another parameter taken into consideration was the heating rate during the application of the first thousands cycles. This parameter was proportional to the stress amplitude, making it a useful parameter since it refers to the initial part of the specimen fatigue life.Marta De Giorgi; Riccardo Nobile; Fania PalanoDE GIORGI, Marta; Nobile, Riccardo; Palano, Fani

Evaluation of the Stress State in Aluminium Foam Sandwiches

In this paper a discussion about the determination of the stress state corresponding to the application of four-points bending load on a sandwich panel having a core made of closed cell aluminium foam is reported. An analytical model based on laminated plate classical theory is compared to a more complex FEM model, considering the effect of geometric parameters of panels, like core and plate thickness, and of loading mode, like span length. The results show the difficulties to define a reliable model to calculate stress state in this kind of composite material