60 research outputs found

    High-Tc bolometers with silicon-nitride spiderwebsuspension for far-infrared detection

    Get PDF
    High-Tc GdBa2Cu3O7-δ (GBCO) superconducting transition edge bolometers with operating temperatures near 90 K have been made with both closed silicon-nitride membranes and patterned silicon-nitride (SiN) spiderweb-like suspension structures. As a substrate silicon-on-nitride (SON) wafers are used which are made by fusion bonding of a silicon wafer to a silicon wafer with a silicon-nitride top layer. The resulting monocrystalline silicon top layer on the silicon-nitride membranes enables the epitaxial growth of GBCO. By patterning the silicon-nitride the thermal conductance G is reduced from about 20 to 3 μW/K. The noise of both types of bolometers is dominated by the intrinsic noise from phonon fluctuations in the thermal conductance G. The optical efficiency in the far infrared is about 75% due to a goldblack absorption layer. The noise equivalent power NEP for FIR detection is 1.8 pW/√Hz, and the detectivity D* is 5.4×1010 cm √Hz/W. Time constants are 0.1 and 0.6 s, for the closed membrane and the spiderweb like bolometers respectively. The effective time constant can be reduced with about a factor 3 by using voltage bias. Further reduction necessarily results in an increase of the NEP due to the 1/f noise of the superconductor

    Low noise far-infrared detection at 90 K using high-T(c) superconducting bolometers with silicon-nitride beam suspension

    Get PDF
    High-T(c) GdBa2Cu3O7-d (GBCO) superconducting transition edge bolometers with operating temperatures near 90 K and receiving area of 1 mm2 have been made with both closed silicon-nitride membranes and patterned silicon-nitride (Si(x)N(y)) spiderweb-like suspension structures. To enable epitaxial growth of the GBCO layer, a thin monocrystalline Si layer is prepared on the silicon-nitride base, using fusion bonding techniques. By pattering the silicon-nitride supporting membrane the thermal conductance G is reduced from 20 to 3.5 μW/K. The noise of both types of bolometers is fully dominated by the intrinsic noise from phonon fluctuations in the thermal conductance G. The optical efficiency in the far infrared is about 75% due to a gold black absorption layer. The optical noise equivalent power (NEP) is 1.8 pW/√Hz, and the detectivity D* is 5.4x1010 cm√Hz/W. Time constants are 0.1 and 0.6 s, for the closed membrane and the spiderweb like bolometers respectively. We have observed an empirical limit for the NEP for this type of bolometers. The effective timeconstant can be reduced with a factor of 3 by using an electronic feedback system or by using voltage bias. A further reduction necessarily results in an increase of the NEP due to the 1/f noise of the superconductor

    Resistive state of superconducting structures with fractal clusters of a normal phase

    Full text link
    The effect of morphologic factors on magnetic flux dynamics and critical currents in percolative superconducting structures is considered. The superconductor contains the fractal clusters of a normal phase, which act as pinning centers. The properties of these clusters are analyzed in the general case of gamma-distribution of their areas. The statistical characteristics of the normal phase clusters are studied, the critical current distribution is derived, and the dependencies of the main statistical parameters on the fractal dimension are found. The effect of fractal clusters of a normal phase on the electric field induced by the motion of the magnetic flux after the vortices have been broken away from pinning centers is considered. The voltage-current characteristics of fractal superconducting structures in a resistive state for an arbitrary fractal dimension are obtained. It is found that the fractality of the boundaries of normal phase clusters intensifies magnetic flux trapping and thereby increases the current-carrying capability of the superconductor.Comment: 15 pages with 8 figures, revtex3, alternative e-mail of author is [email protected]

    Dynamics of the magnetic flux trapped in fractal clusters of normal phase in a superconductor

    Full text link
    The influence of geometry and morphology of superconducting structure on critical currents and magnetic flux trapping in percolative type-II superconductor is considered. The superconductor contains the clusters of a normal phase, which act as pinning centers. It is found that such clusters have significant fractal properties. The main features of these clusters are studied in detail: the cluster statistics is analyzed; the fractal dimension of their boundary is estimated; the distribution of critical currents is obtained, and its peculiarities are explored. It is examined thoroughly how the finite resolution capacity of the cluster geometrical size measurement affects the estimated value of fractal dimension. The effect of fractal properties of the normal phase clusters on the electric field arising from magnetic flux motion is investigated in the case of an exponential distribution of cluster areas. The voltage-current characteristics of superconductors in the resistive state for an arbitrary fractal dimension are obtained. It is revealed that the fractality of the boundaries of the normal phase clusters intensifies the magnetic flux trapping and thereby raises the critical current of a superconductor.Comment: revtex, 16 pages with 1 table and 5 figures; text and figures are improved; more detailed version with geometric probability analisys of the distribution of entry points into weak links over the perimeter of a normal phase clusters and one additional figure is published in Phys.Rev.B; alternative e-mail of author is [email protected]

    Functional response of soil microbial communities to tillage, cover crops and nitrogen fertilization

    Get PDF
    © 2016 Elsevier B.V.Agricultural practices such as tillage, cover crops, and nitrogen (N) fertilization affect physico-chemical and biological soil parameters. However, these factors were often studied separately and their combined effects remain unclear, especially with respect to soil microbial functional diversity and carbon (C) and N content. Thereafter, we aim to assess the links between cropping systems and functional response of microbial communities by using a large range of soil chemical and biological measurements. A 5-yr field experiment was conducted in Northern France using a combination of three factors: i) no-till (NT) vs. conventional tillage (CT); ii) with or without winter cover crops (bare fallow; cover crops with a low prevalence of legumes; cover crop with a high prevalence of legumes); and iii) with or without N fertilization. C and N inputs from cover crops and crop residues, C and N content, enzyme activities, and microbial functional diversity in the topsoil (0–10 cm) were measured over an industrial crop rotation: wheat, pea, corn, wheat, flax. No-till combined with any of the cover crops was characterized by increased total soil organic C and N contents by more than 20% between 2010 and 2015. Dehydrogenase and urease activities were significantly greatest under NT, irrespective of the presence of cover crops. Cover crops without N fertilization under no-till led to higher microbial functional activity (faster carbohydrate and phenolic compound degradation) and diversity. Bare fallow had lower soil microbial functional diversity and C and N contents compared with soil under NT and cover crops. On the other hand, NT associated with cover crops allowed to maintain the soil in both C and N, and to promote microbial activities without N fertilization. In conclusion, winter cover crops and/or NT are sustainable agricultural practices resulting in a greater soil quality index. These results demonstrate that NT and use of standard cover crops or cover crops with legumes for 5 years under a low biomass return in industrial crop production have a positive effect on: i) upper soil C content and microbial enzymes, irrespective of N fertilization regime; ii) soil microbial functional diversity in the absence of N fertilization

    Thrombectomy is a cost-saving procedure up to 24 h after onset

    Full text link
    The treatment of ischemic stroke due to large-vessel occlusion has been revolutionized by mechanical thrombectomy (MT), as multiple trials have consistently shown improved functional outcomes compared to standard medical management both in the early and late time windows after symptom onset. However, MT is an interventional procedure that is more costly than best supportive care (BSC). We set out to study the cost-utility and budget impact of MT + BSC versus BSC alone for large-vessel occlusion using a combined decision tree and Markov model. The analysis was conducted from a Belgian payer perspective over a lifetime horizon, and health states were defined by the modified Rankin Scale (mRS). The treatment effect of MT + BSC combined clinical outcomes from all published early and late treatment window studies showing improved mRS after 90 days. Resource use and utilities were informed by an observational Belgian study of 569 stroke patients. Long-term mRS transitions were sourced from the Oxford Vascular study. MT + BSC generated 1.31 additional quality-adjusted life years and resulted in cost savings of €10,216 per patient over lifetime. Deterministic sensitivity analyses demonstrated dominance of MT over a wide range of parameter inputs. In a Belgian setting, adding MT to BSC within an early time window for 1575 eligible stroke patients every year produced cost savings between €6.3 million (year 1) and €14.6 million (year 5), or a total cost saving of €56.2 million over 5 years. Mechanical thrombectomy is a highly cost-effective treatment for ischemic stroke patients, providing quality-adjusted survival at lower health care cost, both when given in an early time window, as well as in a late time window
    corecore