Microstructure evolution of roll core during the preparation of composite roll by electroslag remelting cladding technology

In the present study, the comprehensive analyses based on the numerical simulation, in situ observation, and metallographic detection were carried out for the roll core of GCr15/45 carbon steel composite roll manufactured by the new electroslag remelting cladding (ESRC) method. During the ESRC process, the temperature distributions at the different radial and longitudinal positions of the roll core have great changes due to the different degrees of heat conduction from the slag bath, as a result, various microstructure and properties were obtained at the different positions of the roll core. The results illustrated that the ESRC process tended to be stable as the composite height reached a certain value and the high-temperature austenitization process mainly occurred in the radial regions where R > 60 mm, whereas no significant changes occurred at the areas where R ≦ 60 mm. The coarse grains and few Widmanstatten structures with proeutectoid ferrite were generated in the roll core areas near the bimetallic interface, while the fine grains with more proeutectoid ferrite were obtained in the roll core area away from the interface. Therefore, a higher tensile strength and a better plasticity were obtained for the specimens away from the interface

Osteoprotective Effect of Radix Scutellariae in Female Hindlimb-Suspended Sprague-Dawley Rats and the Osteogenic Differentiation Effect of Its Major Constituent

A number of medicinal herbs have demonstrated therapeutic effects for the prevention and treatment of disuse-induced osteoporosis. As a common ingredient in proprietary traditional Chinese medicines, the anti-osteoporosis effects of Radix Scutellariae extract (RSE, 50 mg/kg/day) were evaluated in a hindlimb suspended rat model. Bone mineral density (BMD) was measured by dual-energy X-ray absorptiometry, and the micro-architecture observed by MicroCT assay with bone biomechanical properties evaluated by a three-point bending test. To elucidate potential mechanisms, the osteogenic differentiation effect of baicalin as the most abundant ingredient in RSE was investigated in rat bone marrow derived mesenchymal stem cells (rBMSC). After drug administration for 42 days, tibia-BMD was significantly increased to 0.176 ± 0.007 and 0.183 ± 0.011 g/cm2 and f-BMD was enhanced to 0.200 ± 0.017 and 0.207 ± 0.021 g/cm2 for RSE and ALE treatment, respectively, whereas tibia-BMD and femur-BMD of the HLS group were 0.157 ± 0.009 and 0.176 ± 0.008 g/cm2. Deterioration of bone trabecula microstructure was improved by RSE and ALE with increased morphological parameters such as bone volume fraction, trabecular thickness, and trabecular number, as well as connectivity density compared to the HLS group (p < 0.01). A three-point bending test suggested that bone mechanical strength was also enhanced by RSE and ALE treatments with increased maximum stress, young’s modulus, maximum load, and stiffness compared to those of the HLS group (p < 0.05). Besides, serum TRACP levels were significantly suppressed by RSE and ALE treatments. Furthermore, in vitro studies demonstrated that baicalin significantly increased ALP activities and the formation of mineralized nodules in rBMSC. Conclusively, supplementation of RSE could significantly prevent weightlessness induced osteoporosis, which might attribute to the osteogenic differentiation enhancement effect of baicalin

Synthesis, Crystal Structure and Anti-Fatigue Effects of Some Benzamide Derivatives

A series of benzamide derivatives such as 1-(1,3-benzodioxol-5-ylcarbonyl) piperidine (1-BCP) were synthesized by the reaction of substituted benzoic acids with piperidine, morpholine or pyrrolidine using a novel method. The crystals of these benzamide derivatives were obtained by recrystallization. Structures of target and intermediate compounds were determined via FT-IR, 1H-NMR and elemental analysis and X-ray crystallography of select examples. The crystal structures of these compounds have potential applications to identify the binding site for allosteric modulators of the α-amino-3-hydroxy-5-methylisoxazole-4-propionic acid (AMPA) receptor. The anti-fatigue effects of the benzamide derivatives in weight-loaded forced swimming mice were investigated in a swimming endurance capacity test used as an indicator of fatigue. The swimming times to exhaustion were longer in the b3, d3, and e3 groups than in the caffeine group (p < 0.05). In conclusion, b3, d3 and e3 enhanced the forced swimming capacity of mice. The mechanism of the anti-fatigue effects will be studied in the future

Synthesis, Crystal Structure and Anti-Fatigue Effects of Some Benzamide Derivatives

A series of benzamide derivatives such as 1-(1,3-benzodioxol-5-ylcarbonyl) piperidine (1-BCP) were synthesized by the reaction of substituted benzoic acids with piperidine, morpholine or pyrrolidine using a novel method. The crystals of these benzamide derivatives were obtained by recrystallization. Structures of target and intermediate compounds were determined via FT-IR, 1H-NMR and elemental analysis and X-ray crystallography of select examples. The crystal structures of these compounds have potential applications to identify the binding site for allosteric modulators of the α-amino-3-hydroxy-5-methylisoxazole-4-propionic acid (AMPA) receptor. The anti-fatigue effects of the benzamide derivatives in weight-loaded forced swimming mice were investigated in a swimming endurance capacity test used as an indicator of fatigue. The swimming times to exhaustion were longer in the b3, d3, and e3 groups than in the caffeine group (p < 0.05). In conclusion, b3, d3 and e3 enhanced the forced swimming capacity of mice. The mechanism of the anti-fatigue effects will be studied in the future