48 research outputs found
Recommended from our members
3D-Printing of Structure-Controlled Antigen Nanoparticles for Vaccine Delivery
Targeted delivery of antigens to immune cells using micro/nanocarriers may serve as a therapeutic application for vaccination. However, synthetic carriers have potential drawbacks including cytotoxicity, low encapsulation efficiency of antigen, and lack of a morphological design, which limit the translation of the delivery system to clinical use. Here, we report a carrier-free and three-dimensional (3D)-shape-designed antigen nanoparticle by multiphoton lithography-based 3D-printing. This simple, versatile 3D-printing approach provides freedom for the precise design of particle shapes with a nanoscale resolution. Importantly, shape-designed antigen nanoparticles with distinct aspect ratios show shape-dependent immune responses. The 3D-printing approach for the rational design of nanomaterials with increasing safety, complexity, and efficacy offers an emerging platform to develop vaccine delivery systems and mechanistic understanding
Integrated examination and comparison of prospection methods at japanese historical Kiln sites
Magnetic prospection in Japan has been used widely for surveying archaeological sites with thermoremanent magnetism. Kiln sites are a good target and much data has already been accumulated over a long period of time. Magnetic anomalies are two-dimensional, however, while many archaeologists today require three-dimensional data in order to be able to plan for the excavation and preservation of a kiln site. Our group has therefore examined in detail how kiln type can be assessed by archaeologic..
Recommended from our members
4D Printing of a Light-Driven Soft Actuator with Programmed Printing Density
There is a growing interest in the concept of four-dimensional (4D) printing that combines a three-dimensional (3D) manufacturing process with dynamic modulation for bioinspired soft materials exhibiting more complex functionality. However, conventional approaches have drawbacks of low resolution, control of internal micro/nanostructure, and creation of fast, complex actuation due to a lack of high-resolution fabrication technology and suitable photoresist for soft materials. Here, we report an approach of 4D printing that develops a bioinspired soft actuator with a defined 3D geometry and programmed printing density. Multiphoton lithography (MPL) allows for controlling printing density in gels at pixel-by-pixel with a resolution of a few hundreds of nanometers, which tune swelling behaviors of gels in response to external stimuli. We printed a 3D soft actuator composed of thermoresponsive poly(N-isopropylacrylamide) (PNIPAm) and gold nanorods (AuNRs). To improve the resolution of printing, we synthesized a functional, thermoresponsive macrocrosslinker. Through plasmonic heating by AuNRs, nanocomposite-based soft actuators undergo nonequilibrium, programmed, and fast actuation. Light-mediated manufacture and manipulation (MPL and photothermal effect) offer the feasibility of 4D printing toward adaptive bioinspired soft materials. Copyright © 2020 American Chemical Society
Recommended from our members
Anisometric Microstructures to Determine Minimal Critical Physical Cues Required for Neurite Alignment
In nerve regeneration, scaffolds play an important role in providing an artificial extracellular matrix with architectural, mechanical, and biochemical cues to bridge the site of injury. Directed nerve growth is a crucial aspect of nerve repair, often introduced by engineered scaffolds imparting linear tracks. The influence of physical cues, determined by well-defined architectures, has been mainly studied for implantable scaffolds and is usually limited to continuous guiding features. In this report, the potential of short anisometric microelements in inducing aligned neurite extension, their dimensions, and the role of vertical and horizontal distances between them, is investigated. This provides crucial information to create efficient injectable 3D materials with discontinuous, in situ magnetically oriented microstructures, like the Anisogel. By designing and fabricating periodic, anisometric, discreet guidance cues in a high-throughput 2D in vitro platform using two-photon lithography techniques, the authors are able to decipher the minimal guidance cues required for directed nerve growth along the major axis of the microelements. These features determine whether axons grow unidirectionally or cross paths via the open spaces between the elements, which is vital for the design of injectable Anisogels for enhanced nerve repair. © 2021 The Authors. Advanced Healthcare Materials published by Wiley-VCH Gmb
Recommended from our members
Reconstruction of Ultra-thin Alveolar-capillary Basement Membrane Mimics
Alveolar-capillary basement membrane (BM) is ultra-thin (<2 µm) extracellular matrix that maintains integral epithelial-endothelial cell layers. In vitro reconstructions of alveolar-capillary barrier supported on synthetic scaffolds closely resembling the fibrous and ultra-thin natural BM are essential in mimicking the lung pathophysiology. Although BM topology and dimensions are well known to significantly influence cellular behavior, conventionally used BM mimics fail to recreate this natural niche. To overcome this, electrospun ultra-thin 2 µm poly(caprolactone) (PCL) nanofibrous mesh is used to establish an alveolar-capillary barrier model of lung endothelial/epithelial cells. Transepithelial electrical resistance (TEER) and permeability studies reveal integral tight junctions and improved mass transport through the highly porous PCL meshes compared to conventional dense membranes with etched pores. The chemotaxis of neutrophils is shown across the barrier in presence of inflammatory response that is naturally impeded in confined regions. Conventional requirement of 3 µm or larger pore size can lead to barrier disruption due to epithelial/endothelial cell invasion. Despite high porosity, the interconnected BM mimic prevents barrier disruption and allows neutrophil transmigration, thereby demonstrating the physiological relevance of the thin nanofibrous meshes. It is envisioned that these bipolar cultured barriers would contribute to an organ-level in vitro model for pathological disease, environmental pollutants, and nanotoxicology. © 2021 The Authors. Advanced Biology published by Wiley-VCH Gmb
MEFV gene mutations in neuro-Behçet's disease and neuro-Sweet disease
ArticleAnnals of clinical and translational neurology. 6(12): 2595-2600 (2019)journal articl
3D-Printing of Structure-Controlled Antigen Nanoparticles for Vaccine Delivery
Targeted delivery of antigens to immune cells using micro/nanocarriers may serve as a therapeutic application for vaccination. However, synthetic carriers have potential drawbacks including cytotoxicity, low encapsulation efficiency of antigen, and lack of a morphological design, which limit the translation of the delivery system to clinical use. Here, we report a carrier-free and three-dimensional (3D)-shape-designed antigen nanoparticle by multiphoton lithography-based 3D-printing. This simple, versatile 3D-printing approach provides freedom for the precise design of particle shapes with a nanoscale resolution. Importantly, shape-designed antigen nanoparticles with distinct aspect ratios show shape-dependent immune responses. The 3D-printing approach for the rational design of nanomaterials with increasing safety, complexity, and efficacy offers an emerging platform to develop vaccine delivery systems and mechanistic understanding
Combination of Entecavir or Tenofovir with Pegylated Interferon-α for Long-Term Reduction in Hepatitis B Surface Antigen Levels: Simultaneous, Sequential, or Add-on Combination Therapy
Seroclearance of hepatitis B surface antigen (HBsAg) (“functional cure”) is the optimal endpoint of antiviral therapy for chronic hepatitis B virus (HBV) infection. Currently available anti-HBV therapy includes nucleoside/nucleotide analogs (NAs) and peginterferon-α (Peg-IFNα). Combination of NAs and Peg-IFNα, each with different mechanisms of action, is an attractive approach for treating chronic HBV infection. In earlier studies, compared with monotherapy using IFNα, combination therapy showed greater on-treatment HBV DNA suppression but no difference in the sustained response. However, responses to the combination of non-pegylated IFNα with lamivudine or adefovir were not assessed based on HBsAg quantification but were defined by normal alanine aminotransferase levels, testing negative for hepatitis B e-antigen, and low HBV DNA load over a short term. Here, we reviewed previous reports regarding the effects of combination therapy of entecavir or tenofovir with Peg-IFNα, focusing on long-term reduction in HBsAg levels. Regimens of combination therapy were classified into “simultaneous” combination (“de novo” strategy); “sequential” combination, which involved starting with one therapy followed by the other (“switch-to” strategy); “add-on” combination, which involved adding Peg-IFNα to an ongoing NAs. Some studies have shown promising results, but there is no robust evidence that combination therapy is superior to monotherapy. Large studies are needed to assess the safety and efficacy of combination therapies to increase the rates of HBsAg seroclearance over the long term