Comparative analysis of parameters of pulsed copper vapour laser and known types of technological lasers

In the present paper we present the results of a comparative analysis of pulsed copper vapour lasers with visible emission wavelengths of 510.6 and 578.2 nm and pulse duration of 10-30 ns and known types of technological lasers as well as the prospects for using the copper vapor laser for microprocessing of material

Stimulated Thermal Scattering in Two-Photon Absorbing Nanocolloids under Laser Radiation of Nanosecond-to-Picosecond Pulse Widths

Recent discoveries in nonlinear optical properties of nanoparticle colloids make actual the challenge to lower the energy threshold of phase conjugation and move it into the domain of shorter pulse widths. A novel effect of the stimulated Rayleigh-Mie scattering (SRMS) in two-photon absorbing nanocolloids is considered as a promising answer to this challenge. We report the results of experimental and theoretical study of the two-photon-assisted SRMS in Ag and ZnO nanocolloids in the nanosecond-to-picosecond pulse width domain. For 12 ns 0.527 μm laser pulses, the four-wave mixing SRMS scheme provides lasing and amplification of backscattered anti-Stokes signal in Ag nanocolloids in toluene at the threshold 0.2 mJ and the spectral shifts up to 150 MHz. For 100 ps 0.532 μm pulses, we observed for the first time efficient (over 50% in signal-to-pump ratio of pulse energies) SRMS backscattering of the anti-Stokes signal in Ag nanocolloids in toluene and predominantly Stokes signal in ZnO nanocolloids in water, with the spectral shifts up to 0.25 cm−1. We develop the first order-in-perturbation model of the four-wave mixing two-photon absorption-assisted SRMS process which shows that at nanosecond pulses, amplification is predominantly due to the thermal-induced coherent oscillations of polarization while the slow temperature wave acts also as a dynamic spatial grating which provides a self-induced optical cavity inside the interaction region. At a picosecond pulse width, according to our model, the spectral overlap between pump and signal pulses results in formation of only the dynamic spatial temperature grating, and we succeeded at recovering the linear growth of the spectral shift with the pump power near the threshold

Titanium(III, IV)-Containing Catalytic Systems for Production of Ultrahigh Molecular Weight Polyethylene Nascent Reactor Powders, Suitable for Solventless Processing—Impact of Oxidation States of Transition Metal

Catalytic systems containing TiCl4 or TiCl3, THF, organomagnesium (n-Bu2Mg) and organoaluminum compounds capable of producing ultrahigh molecular weight polyethylene (UHMWPE) were developed. The resulting polymers were characterized by a molecular weight in the range of (1.8–7.8) × 106 Da and desirable morphology, suitable for modern methods of polymer processing—the solvent-free solid-state processing of superhigh-strength (tensile strength up to 2.1 GPa) and high-modulus (elastic modulus up to 125 GPa) oriented films and film tapes. The impacts of a THF additive, the oxidation state of the titanium atom, and the composition and nature of the nontransition organometallic compounds on the formation of catalytic systems for UHMWPE production were evaluated. The results indicate the suitability of individual titanium chloride tetrahydrofuran complex application for the formation of THF-containing catalytic systems. This approach also results in a significant increase in the system catalytic activity and mechanical properties of UHMWPE. The catalysts based on Ti(III) were inferior to systems containing Ti(IV) in productivity but were markedly superior in the mechanical properties of UHMWPE

A Novel Ziegler–Natta-Type Catalytic System—TiCl₄/2,2′-Dimethoxy-1,1′-Binaphthalene/Et₃Al₂Cl₃/Bu₂Mg for Production of Ultrahigh Molecular Weight Polyethylene Nascent Reactor Powders, Suitable for Solvent-Free Processing

A series of ultrahigh molecular weight polyethylenes with viscosity-average molecular weights in the range of 1.6⁻5.6 × 106 have been prepared by using a novel Ziegler⁻Natta-type catalytic system—TiCl4/2,2′-dimethoxy-1,1′-binaphthalene/Et3Al2Cl3/Bu2Mg at different temperatures (Tpoly) in the range between 10 and 70 °C in toluene. The morphology of the nascent reactor powders has been studied by scanning electron microscopy, wide-angle X-ray diffraction, and the DSC melting behavior. Polymers are suitable for the modern processing methods—the solvent-free solid-state formation of super high-strength (tensile strength over 1.8⁻2.5 GPa) and high-modulus (elastic modulus up to 136 GPa) oriented film tapes. With decrease of Tpoly, the drawability of the reactor powders increased significantly