AN AUTOMATED, DEEP LEARNING APPROACH TO SYSTEMATICALLY & SEQUENTIALLY DERIVE THREE-DIMENSIONAL KNEE KINEMATICS DIRECTLY FROM TWO-DIMENSIONAL FLUOROSCOPIC VIDEO

Total knee arthroplasty (TKA), also known as total knee replacement, is a surgical procedure to replace damaged parts of the knee joint with artificial components. It aims to relieve pain and improve knee function. TKA can improve knee kinematics and reduce pain, but it may also cause altered joint mechanics and complications. Proper patient selection, implant design, and surgical technique are important for successful outcomes. Kinematics analysis plays a vital role in TKA by evaluating knee joint movement and mechanics. It helps assess surgery success, guides implant and technique selection, informs implant design improvements, detects problems early, and improves patient outcomes. However, evaluating the kinematics of patients using conventional approaches presents significant challenges. The reliance on 3D CAD models limits applicability, as not all patients have access to such models. Moreover, the manual and time-consuming nature of the process makes it impractical for timely evaluations. Furthermore, the evaluation is confined to laboratory settings, limiting its feasibility in various locations. This study aims to address these limitations by introducing a new methodology for analyzing in vivo 3D kinematics using an automated deep learning approach. The proposed methodology involves several steps, starting with image segmentation of the femur and tibia using a robust deep learning approach. Subsequently, 3D reconstruction of the implants is performed, followed by automated registration. Finally, efficient knee kinematics modeling is conducted. The final kinematics results showed potential for reducing workload and increasing efficiency. The algorithms demonstrated high speed and accuracy, which could enable real-time TKA kinematics analysis in the operating room or clinical settings. Unlike previous studies that relied on sponsorships and limited patient samples, this algorithm allows the analysis of any patient, anywhere, and at any time, accommodating larger subject populations and complete fluoroscopic sequences. Although further improvements can be made, the study showcases the potential of machine learning to expand access to TKA analysis tools and advance biomedical engineering applications

EFFECTS OF INTERFACIAL ADHESION ON DEFORMATION AND FRACTURE BEHAVIOUR OF COMPOSITES BASED ON POLYPROPYLENE AND GLASS BEADS

In this study, the isotactic polypropylene, a semicrystalline polymer, was used as a matrix for composites containing 20% and 40% (by weight) of glass bead filler. Selected surface treatment was applied to obtain different adhesion between particles and polymer matrix. In addition to non-treated filler, filler treated with i) a release agent (labelled as NO adhesion) and ii) an adhesion promoter (labelled as GOOD adhesion) were incorporated into the matrix. The morphology, tensile mechanical and fracture behaviour (J-integral) were investigated. Morphology observation revealed a poor interfacial adhesion in the case of non-treated and “NO adhesion” samples represented with debonding of particles. In contrast, strong particle-matrix interactions were confirmed in “GOOD adhesion” samples. The presence of rigid filler particles increased the stiffness, while strain at break was decreased with the lowest value for the composites with strong interfacial adhesion. On the other hand, the higher rigidity and lower deformability decreased in fracture toughness

Two-Bit Bit Flipping Decoding of LDPC Codes

In this paper, we propose a new class of bit flipping algorithms for low-density parity-check (LDPC) codes over the binary symmetric channel (BSC). Compared to the regular (parallel or serial) bit flipping algorithms, the proposed algorithms employ one additional bit at a variable node to represent its "strength." The introduction of this additional bit increases the guaranteed error correction capability by a factor of at least 2. An additional bit can also be employed at a check node to capture information which is beneficial to decoding. A framework for failure analysis of the proposed algorithms is described. These algorithms outperform the Gallager A/B algorithm and the min-sum algorithm at much lower complexity. Concatenation of two-bit bit flipping algorithms show a potential to approach the performance of belief propagation (BP) decoding in the error floor region, also at lower complexity.Comment: 6 pages. Submitted to IEEE International Symposium on Information Theory 201

A low-cost system for monitoring pH, dissolved oxygen and algal density in continuous culture of microalgae

In a continuous and closed system of culturing microalgae, constantly monitoring and controlling pH, dissolved oxygen (DO) and microalgal density in the cultivation environment are paramount, which ultimately influence on the growth rate and quality of the microalgae products. Apart from the pH and DO parameters, the density of microalgae can be used to contemplate what light condition in the culture chamber is or when nutrients should be supplemented, which both also decide productivity of the cultivation. Moreover, the microalgal density is considered as an indicator indicating when the microalgae can be harvested. Therefore, this work proposes a low-cost monitoring equipment that can be employed to observe pH, DO and microalgal density over time in a culture environment. The measurements obtained by the proposed monitoring device can be utilized for not only real-time observations but also controlling other sub-systems in a continuous culture model including stirring, ventilating, nutrient supplying and harvesting, which leads to more efficiency in the microalgal production. More importantly, it is proposed to utilize the off-the-shelf materials to fabricate the equipment with a total cost of about 513 EUR, which makes it practical as well as widespread. The proposed monitoring apparatus was validated in a real-world closed system of cultivating a microalgae strain of Chlorella vulgaris. The obtained results indicate that the measurement accuracies are 0.3%, 3.8% and 8.6% for pH, DO and microalgae density quantities, respectively. © 2022 The Author(s