3D-BIM and 4D-BIM Models in Construction Safety Management

The application of modern technologies into on-site construction safety management has been proved that be successful. BIM technology which has been studied and developed for adopting widely in the construction industry is promised to bring significant improvements in construction safety management. The article reviewed the application of BIM in the management of construction safety, detailed for each safety work activity. Suggestions for selecting BIM tools in the management of construction safety are also listed. Lastly, the article poses some obstacles while applying BIM to construction safety management in Vietnam

Hardware Architectures of Visible Light Communication Transmitter and Receiver for Beacon-based Indoor Positioning Systems

High-speed applications of Visible Light Communications have been presented recently in which response times of photodiode-based VLC receivers are critical points. Typical VLC receiver routines, such as soft-decoding of run-length limited (RLL) codes and FEC codes was purely processed on embedded firmware, and potentially cause bottleneck at the receiver. To speed up the performance of receivers, ASIC-based VLC receiver could be the solution. Unfortunately, recent works on soft-decoding of RLL and FEC have shown that they are bulky and time-consuming computations. This causes hardware implementation of VLC receivers becomes heavy and unrealistic. In this paper, we introduce a compact Polar-code-based VLC receivers. in which flicker mitigation of the system can be guaranteed even without RLL codes. In particular, we utilized the centralized bit-probability distribution of a pre-scrambler and a Polar encoder to create a non-RLL flicker mitigation solution. At the receiver, a 3-bit soft-decision filter was implemented to analyze signals received from the VLC channel to extract log-likelihood ratio (LLR) values and feed them to the Polar decoder. Therefore, the proposed receiver could exploit the soft-decoding of the Polar decoder to improve the error-correction performance of the system. Due to the non-RLL characteristic, the receiver has a preeminent code-rate and a reduced complexity compared with RLL-based receivers. We present the proposed VLC receiver along with a novel very-large-scale integration (VLSI) architecture, and a synthesis of our design using FPGA/ASIC synthesis tools

TECHNICAL ASSESSMENT OF GAMMA-AMINO BUTYRIC ACID (GABA) PRODUCTION FROM RICE BRAN

This research focused on technical assessment of GABA production from rice bran through fermentation by Lactobacillus brevis. Influence of operating pressure on separation of GABA by nanofiltration membrane was investigated and 4 bar was suitable for the nanofiltration process. The purification of GABA by nanofiltration with constant feed volume was carried out and purity of GABA reached 4.8 folds, compared to feed, at 5 volumes of added water. At 40 of concentration factor in concentration of GABA solution by nanofiltration with full recycle of retentate, content of GABA reached 49.8 g/L. The production of GABA from defatted rice bran at pilot scale was carried out at 1,000 L/batch (equal to 200 kg of rice bran) of fermentation. Estimation of mass balance showed that, with 200 kg of defatted rice bran, 7.0 kg of GABA powder was obtained. Results indicated that, it is potential to produce GABA from rice bran through the fermentation by Lactobacillus brevis

Mechanism of Inverse Magnetoresistance in High-TaT_{a} Annealed MnNi/Co/Ag(Cu)/Py Spin Valves

The magnetic transport properties -- magnetoresistive (MR) effects of MnNi/Co/Ag(Cu)/\break Py pinned spin valve structures (SVs) prepared by rf sputtering method and annealed at $T_{a} = 100$°C - 500°C for 30 minutes in high vacuum ($\sim 10^{ - 5}$ torr) are investigated. The received results show a change in the observed MR behaviors from a normal giant magnetoresistance effect to an inverse magnetoresistance effect after annealing at high temperatures, 300°C and 400°C, for these SVs. The origin and mechanism of the IMR behavior are analyzed and discussed. These results will suggest an ability to manufacture SV devices used the IMR effect for enhancing the application capacities for SV-sensor systems

Real-time Damper Force Estimation for Automotive Suspension: A Generalized H2/LPV Approach

The real-time knowledge of the damper force is of paramount importance in controlling and diagnosing automotive suspension systems. This study presents a generalized H2/LPV observer for damper force estimation of a semi-active electro-rheological (ER) suspension system. First, an extended quarter-car model augmented with the nonlinear and dynamical model of the semi-active suspension system is written into the quasi-LPV formulation. Then, the damper force estimation method is developed through a generalized H2/LPV observer whose objective is to handle the impact of unknown road disturbances and sensor noise on the estimation errors of the state variables thanks to the H2 norm. The measured sprung and unsprung mass accelerations of the quarter-car system are used as inputs for the observer. The proposed approach is simulated with validated model of the 1/5-scaled real vehicle testbed of GIPSA-lab. Simulation results show the performance of the estimation method against unknown disturbances, emphasizing the effectiveness of the damper force estimation in real time

Regulations on PPP contracts in Vietnam: Status Quos and Solutions

PPP investments have been in practice in Vietnam for more than 20 years, yet, many shortcomings and constraints have been revealed. This paper analyzes applicable legal regulations on Public-private partnership contracts of investment in Vietnam, and demonstrates barriers encountered by parties, particularly private sector, including discrepancies and non-coherence among legal documents resulting in losses, wastes of resources; absence of standard agreements/ contracts making negotiations and contract signing hard to conclude; insufficient clarity in provisions about concessioning, and responsibilities, among others. The analysis, hence, suggests how to deal with the situation by amendments, supplements to provisions on the agreements between public and private partners

BACTERICIDAL ACTIVITY OF NANOSILVER AGAINST PATHOGENIC MICROORGANISMS WHICH CAUSE PECULAR DISEASES OF GENITAL SECRETION TRACK

      Nano silver was known as a bactericidal agent for almost all bacterial species and has been intensively investigated over the world to apply for disinfection in different fields of human activities and environmental protection. Specifically, genital exudate media contain numerous dangerous bacteria such as Neisseria gonorrhoeae, Enterococcus faecalis, Staphylococcus aureus, Candida albicans etc. which as a rule are drug-resistant with respect to antibiotics. This research presents the results of the application of nanosilver in replacing antibiotics in elimination of the above mentioned microorganisms by using low nanosilver concentrations of about 0.01 mg/cm2 immobilized on non-woven fabric. The experimental data showed that nanosilver-impregnated fabric samples at a concentration 0.01 mg/cm2 gave antibacterial rings of 10 mm, 9 mm and 8 mm, respectively, for        N. gonorrhoeae, Candida albicans + E.coli and Candida albicans + E.coli + S. aureus

A novel ontology framework supporting model-based tourism recommender

In this paper, we present a tourism recommender framework based on the cooperation of ontological knowledge base and supervised learning models. Specifically, a new tourism ontology, which not only captures domain knowledge but also specifies knowledge entities in numerical vector space, is presented. The recommendation making process enables machine learning models to work directly with the ontological knowledge base from training step to deployment step. This knowledge base can work well with classification models (e.g., k-nearest neighbours, support vector machines, or naıve bayes). A prototype of the framework is developed and experimental results confirm the feasibility of the proposed framework. © 2021, Institute of Advanced Engineering and Science. All rights reserved

Influence Of Fabrication Condition on the Microstructural and Optical Properties of Lead-Free Ferroelectric Bi0.5_{0.5}Na0.5_{0.5}TiO3_{3} Materials

Lead-free ferroelectric materials have attracted considerable attention due to the increasing potential application in environmental benign materials. Among lead-free ferroelectric materials, the Bi0.5Na0.5TiO3 (BNT) materials were more studied because it exhibited the good ferroelectric and piezoelectric properties which could be promising candidate materials replacing Pb(Zr,Ti)O3. In this work, the lead-free ferroelectric BNT materials were synthesized by sol-gel method. The effects of fabrication process to microstructural and optical properties were studied which includes Na precursor concentration and calcining temperature. The result indicated that the Na precursor concentration were higher 40 mol.% and the calcining temperature