43 research outputs found
Development of Alginate/Chitosan Microparticles for Dust Mite Allerge
Purpose: To develop chitosan/alginate microparticles for the mucosal delivery of allergen from dust mite (Dermatophagoides pteronyssinus).Methods: Chitosan/alginate microparticles were prepared by ionotropic gelation. The effects of polymer content, crosslinking agent, and preparation method on the physicochemical characteristics of the microparticles as well as their in vitro cytotoxicity were investigated.Results: The microparticles were small (1 - 17 μm) and spherical in shape. The highest allergen content (0.30 ± 0.07 mg/g) was obtained with 2.5 % initial allergen loading in chitosan- triphosphate (CS-TPP) microparticles. Sustained allergen release (approx. 50 % over 24 h) was observed from alginate-coated chitosan microparticles. Allergen incorporation method and initial drug-loading could be varied to obtain optimum particle size with high allergen-loading and sustained release. The cytotoxicity of various microparticle formulations did not differ significantly (p > 0.05 ), as cell viability values were close to 100 %.Conclusion: This study indicates that alginate and alginate-coated chitosan microparticles are safe and can be further developed for mucosal allergen delivery.Keywords: Alginate, Chitosan, Microparticle, Allergen delivery, Dust mite, Dermatophagoides pteronyssinu
In Vitro Antioxidant Activity of Chitosan Aqueous Solution: Effect of Salt Form
Purpose: To investigate the effect of salt form on the antioxidant activities of chitosan aqueous solution.Methods: The antioxidant activities of chitosan acetate (CS-acetate), chitosan hydroxybenzotriazole (CS-HOBt), chitosan thiamine pyrophosphate (CS-TPP) and chitosan ethylenediaminetetraacetic acid (CS-EDTA) solution were determined employing various established in vitro system such as superoxide and hydroxyl radicals scavenging, metal ion chelating and reducing power. Their chemical structures were characterized by nuclear magnetic resonance (NMR) and Fourier transform infraredspectrophotometry (FT-IR).Results: NMR and FT-IR show confirmed formation of chitosan salts. The 50 % inhibition concentration (IC50) of superoxide and hydroxyl radicals was 0.349 – 1.34 and 0.34 – 1.54 mg/mL, respectively. Among the salt forms, CS-acetate (IC50 = 0.349 mg/mL) showed the highest superoxide radical scavenging effect while CS-HOBt (IC50 = 0.34 mg/mL) showed the highest hydroxyl radical scavenging effect. With regard to metal ion chelating activity, CS-EDTA showed the highest chelating activity (approx 100 % at 1 mg/mL) while the others showed 20 % activity at a concentration of 1 mg/mL. The results for reducing power indicate that CS-TPP had the highest reducing power.Conclusion: The results indicate that antioxidant activity varied with the salt form. Thus, CS salts may be used as a source of antioxidants for pharmaceutical applications.Keywords: Chitosan, Antioxidant, Hydroxybenzotriazole, Thiamine pyrophosphate, Ethylenediaminetetraacetic aci
Fabrication of Cationic Exchange Polystyrene Nanofibers for Drug Delivery
Purpose: To prepare polystyrene nanofiber ion exchangers (PSNIE) with surface cation exchange functionality using a new method based on electrospinning and also to optimize crosslinking and sulfonation reactions to obtain PSNIE with maximum ion exchange capacity (IEC).Method: The nanofibers were prepared from 15% w/v polystyrene solution in dimethylacetamide (DMAc) containing 0.025 %w/v tetrabutylammonium bromide (TBAB) using electrospinning technique, followed by crosslinking with sulfuric acid/formaldehyde in a ratio ranging from 100/0 to 50/50 v/v and sulfonation in sulfuric acid. Degree of crosslinking was determined as the amount of fibers that remained in dichloromethane. The morphology and diameter of the fibers were evaluated by scanning electron microscopy (SEM) while IEC of PSNIE was performed by salt splitting titration.Results: PSNIE crosslinked with a sulfuric acid/formaldehyde ratio of 90/10 with 0.1 %w/v silver sulfate for 10 min at 70°C and sulfonated in 98 % sulfuric acid with 0.2 %w/v silver sulfate as the catalyst at 100°C for 30 min showed a maximum IEC of 3.21 meq/g-dry-PSNIE. Increase in sulfonation temperature caused the IEC of PSNIE to increase due to faster sulfonation. It was observed that the higher the temperature the faster the rate of sulfonation reaction. The diameter of the fibers after sulfonation was 404 ± 42 nm.Conclusion: These results indicate that PSNIE can be successfully prepared by electrospinning. Furthermore, cationic drug can be loaded onto the novel PSNIE for controlled release delivery.Keywords: Polystyrene, Ion exchange capacity, Nanofibers, Ion exchangers, Crosslinking, Sulfonation
Development and Evaluation of Ketoprofen Acrylic Transdermal Patches
Purpose: To fabricate ketoprofen transdermal patches (KTPs) using an acrylic pressure-sensitive adhesive (PSA) polymer.Methods: KTPs were prepared using solvent casting method. The influence of the amount of PSA, drug content, and terpenes as penetration enhancers on the characteristics of the patch, namely, thickness, W/A ratio, and adhesiveness and in vitro skin permeation, were investigated. Scanning electron microscope (SEM) and differential scanning calorimetry (DSC) studies were also performed on the patches. The physical and chemical stability of KTPs after storage at 40 oC, and 75 %RH for 1 month was also evaluated.Results: DSC thermograms demonstrate that the drug was dispersed molecularly in the polymer in all the formulations. Increase in PSA content increased the W/A ratio and adhesiveness of KTPs. Ketoprofen release from the transdermal patches followed the Higuchi diffusion model. Ketoprofen flux increased with increase in the ketoprofen content of the adhesive matrix. Inclusion of terpenes in the patch formulations significantly increased the permeation of ketoprofen through the skin, with enhancement ratio (ER) ranging from 1.4 to 2.6.Conclusion: KTPs formulated with acrylic pressure-sensitive adhesive and incorporating terpenes as permeation enhancers demonstrated suitable characteristics for transdermal delivery of ketoprofen.Keywords: Ketoprofen, Transdermal patch, Skin permeation, Acrylic matrix, Terpenes, Pressuresensitive adhesive
Effect of liposomal fluidity on skin permeation of sodium fluorescein entrapped in liposomes
Thirapit Subongkot,1 Tanasait Ngawhirunpat21Department of Pharmaceutical Technology, Faculty of Pharmaceutical Sciences, Burapha University, Chonburi, Thailand; 2Department of Pharmaceutical Technology, Faculty of Pharmacy, Silpakorn University, Nakhon Pathom, ThailandAbstract: The purpose of this study was to investigate the effect of ultradeformable liposome components, Tween 20 and terpenes, on vesicle fluidity. The fluidity was evaluated by electron spin resonance spectroscopy using 5-doxyl stearic acid and 16-doxyl stearic acid as spin labels for phospholipid bilayer fluidity at the C5 atom of the acyl chain near the polar head group (hydrophilic region) and the C16 atom of the acyl chain (lipophilic region), respectively. The electron spin resonance study revealed that Tween 20 increased the fluidity at the C5 atom of the acyl chain, whereas terpenes increased the fluidity at the C16 atom of the acyl chain of the phospholipid bilayer. The increase in liposomal fluidity resulted in the increased skin penetration of sodium fluorescein. Confocal laser scanning microscopy showed that ultradeformable liposomes with terpenes increase the skin penetration of sodium fluorescein by enhancing hair follicle penetration.Keywords: ultradeformable liposomes, terpenes, fluidity, electron spin resonance spectroscopy, confocal laser scanning microscop
Development of a novel microemulsion for oral absorption enhancement of all-trans retinoic acid
Thirapit Subongkot,1 Tanasait Ngawhirunpat2 1Department of Pharmaceutical Technology, Faculty of Pharmaceutical Sciences, Burapha University, Chonburi, Thailand; 2Department of Pharmaceutical Technology, Faculty of Pharmacy, Silpakorn University, Nakhon Pathom, Thailand Abstract: This study was aimed to develop a novel microemulsion that contained oleth-5 as a surfactant to enhance the oral absorption of all-trans retinoic acid (ATRA). The prepared microemulsion was evaluated for its particle size, shape, zeta potential, in vitro release, in vitro intestinal absorption, intestinal membrane cytotoxicity and stability. The obtained microemulsion was spherical in shape with a particle size of <200 nm and a negative surface charge. The in vitro release of the ATRA-loaded microemulsion was best fit with the zero-order model. This microemulsion significantly improved the intestinal absorption of ATRA. Confocal laser scanning microscopy analysis using a fluorescent dye-loaded microemulsion also confirmed the intestinal absorption result. The intestinal membrane cytotoxicity of the ATRA-loaded microemulsion did not differ from an edible oil (fish oil). Stability testing showed that the ATRA-loaded microemulsion was more stable at 25°C than 40°C. Keywords: microemulsion, all-trans retinoic acid, oral absorption enhancement, oleth-5, fish oi
Mechanistic study of decreased skin penetration using a combination of sonophoresis with sodium fluorescein-loaded PEGylated liposomes with D-limonene
Worranan Rangsimawong, Praneet Opanasopit, Theerasak Rojanarata, Tanasait Ngawhirunpat Faculty of Pharmacy, Silpakorn University, Nakhon Pathom, Thailand Abstract: The effect of low frequency sonophoresis (SN, 20 kHz) on the skin transport of sodium fluorescein (NaFI)-loaded liposomes was investigated. An in vitro skin penetration study in open and blocked hair follicles was performed, and confocal laser scanning microscopy and scanning electron microscopy were used to visualize the penetration pathways. The results showed that SN significantly increased the flux of NaFI solution, whereas it significantly decreased the flux of NaFI-loaded polyethylene glycol-coated (PEGylated) liposomes with D-limonene (PL-LI). SN did not significantly affect the flux of NaFI-loaded conventional liposomes and PEGylated liposomes. In the blocked follicles, the flux of NaFI-loaded PL-LI both with and without SN decreased, indicating that NaFI-loaded PL-LI penetrated the skin via the transfollicular pathway. A confocal laser scanning microscopy image showed that in the skin without SN, the fluorescence intensity of NaFI-loaded PL-LI was observed in the skin and along the length of hair inside the skin, whereas in the skin with applied SN, the fluorescence intensity was detected only on the top of hair outside the skin. From scanning electron microscopy images, SN dislocated the corneocytes and reduced the deposition of PL-LI around hair follicles. These results revealed that SN may partially plug hair follicle orifices and reduce percutaneous absorption through the follicular pathway. Keywords: sonophoresis, PEGylated liposomes, hydrophilic compound, follicular pathwa
Evaluation of some anionic exchange resins as potential tablet disintegrants
Purpose: To determine the potential of some anionic exchange resins as tablet disintegrants.Methods: Dowex1® x2, x4 and x8 resins (crosslinked copolymers of styrene and divinylbenzene with quaternary methyl amine functionality) were evaluated as disintegrant for dibasic calcium phosphate dihydrate tablets. The best resin providing the fastest disintegration and highest hardness of obtained tablets was selected for further investigation. The effect of resin concentration and compression force on the properties of tablets using the selected resin was investigated. In addition, the disintegrant efficacy of the selected resin in the tablet formulations containing either a basic drug, e.g., dextromethorphan hydrobromide (DMP), or an acidic drug, e.g., diclofenac sodium (DCN), was determined in comparison with sodium starch glycolate (SSG).Results: Dowex1®x2 resin exhibited the fastest disintegration (6.0 s) and the highest hardness (103.6 N) of obtained tablets. These disintegrating and tablet properties depended upon the resin concentration and compression force. For DMP, the resin provided faster disintegration and drug release (8.0 s and 100.4 % at 10 min) as compared with SSG (16.2 s and 98.9 % at 30 min). In contrast, the resin caused the depleted release of DCN (61.6 % at 120 min) in spite of providing the faster tablet disintegration (10.0 s) than SSG (15.5 s) due to the ionic binding of the drug and resin.Conclusion: The Dowex1®x2 resin was shown to be a potential disintegrant for the tablets of basic drugs.Keywords: Anionic exchange resin, Disintegrant, Dextromethorphan hydrobromide, Diclofenac sodium, Calcium phosphat