The role of small-colony variants in failure to diagnose and treat biofilm infections in orthopedics

Biomaterial-related infection of joint replacements is the second most common cause of implant failure, with serious consequences. Chronically infected replacements cannot be treated without removal of the implant, as the bio film mode of growth protects the bacteria against antibiotics. This review discusses bio film formation on joint replacements and the important clinical phenomenon of small-colony variants (SCVs). These slow-growing phenotypic variants often remain undetected or are misdiagnosed using hospital microbiological analyses due to their unusual morphological appearance and biochemical reactions. In addition, SCVs make the infection difficult to eradicate. They often lead to recurrence since they respond poorly to standard antibiotic treatment and can sometimes survive intracellularly

Gentamicin release from commercially-available gentamicin-loaded PMMA bone cements in a prosthesis-related interfacial gap model and their antibacterial efficacy

BACKGROUND: Around about 1970, a gentamicin-loaded poly (methylmethacrylate) (PMMA) bone cement brand (Refobacin Palacos R) was introduced to control infection in joint arthroplasties. In 2005, this brand was replaced by two gentamicin-loaded follow-up brands, Refobacin Bone Cement R and Palacos R + G. In addition, another gentamicin-loaded cement brand, SmartSet GHV, was introduced in Europe in 2003. In the present study, we investigated differences in gentamicin release and the antibacterial efficacy of the eluent between these four cement brands. METHODS: 200 μm-wide gaps were made in samples of each cement and filled with buffer in order to measure the gentamicin release. Release kinetics were related to bone cement powder particle characteristics and wettabilities of the cement surfaces. Gaps were also inoculated with bacteria isolated from infected prostheses for 24 h and their survival determined. Gentamicin release and bacterial survival were statistically analysed using the Student's t-test. RESULTS: All three Palacos variants showed equal burst releases but each of the successor Palacos cements showed significantly higher sustained releases. SmartSet GHV showed a significantly higher burst release, while its sustained release was comparable with original Palacos. A gentamicin-sensitive bacterium did not survive in the high gentamicin concentrations in the interfacial gaps, while a gentamicin-resistant strain did, regardless of the type of cement used. Survival was independent of the level of burst release by the bone cement. CONCLUSIONS: Although marketed as the original gentamicin-loaded Palacos cement, orthopaedic surgeons should be aware that the successor cements do not appear to have the same release characteristics as the original one. Overall, high gentamicin concentrations were reached inside our prosthesis-related interfacial gap model. These concentrations may be expected to effectively decontaminate the prosthesis-related interfacial gap directly after implantation, provided that these bacteria are sensitive for gentamicin

Biomaterial-associated infections in orthopaedics: prevention and detection

+133hlm.;24c

Successful Treatment of Candida Albicans-Infected Total Hip Prosthesis With Staged Procedure Using an Antifungal-Loaded Cement Spacer

AbstractWe present a rare case of an immunocompetent host who developed a Candida albicans–infected total hip prosthesis. The infection could not be eradicated with debridement and extensive antifungal therapy. Our patient first underwent a resection of the proximal femur and local treatment with gentamicin-loaded cement beads. In a second procedure, a handmade cement spacer impregnated with voriconazole, amphotericin B, and vancomycin was placed. After 3 months of additional systemic antibiotic therapy, the patient remained afebrile, and a tumor prosthesis was placed. Six years postoperatively, she is doing well, walking with a small limp and no signs of recurrent infection. This is the first report on elution of voriconazole and amphotericin B from bone cement delivered at clinically significant concentrations for at least 72 hours

Intraoperative contamination influences wound discharge and periprosthetic infection

Intraoperative bacterial contamination increases risk for postoperative wound-healing problems and periprosthetic infection, but to what extent remains unclear. We asked whether bacterial contamination of the instruments and bone during primary prosthesis insertion was associated with prolonged wound discharge and subsequent periprosthetic infection. During 100 total hip arthroplasties, four intraoperative cultures were taken from the instruments and two portions of removed bone. Postoperatively, the duration of wound discharge was monitored, with Day 5 as the cut-off point. All patients were followed for 2 years to determine whether periprosthetic infection occurred. Bacterial contamination occurred in 36 operative procedures (36%). We found an association between intraoperative contamination and prolonged wound discharge, with a relative risk of 2.5. The culturing of removed bone had a positive predictive value of 81% to 90%. Other factors associated with prolonged wound discharge were rheumatoid arthritis (relative risk, 6.4), use of cement (relative risk, 1.6), and increased blood loss (relative risk, 1.5)

Effects of vitamin E incorporation in polyethylene on oxidative degradation, wear rates, immune response, and infections in total joint arthroplasty: a review of the current literature

Highly cross-linked ultrahigh molecular weight polyethylene (UHMWPE) was introduced to decrease wear debris and osteolysis. During cross-linking, free radicals are formed, making highly cross-linked polyethylene vulnerable to oxidative degradation. In order to reduce this process, anti-oxidant vitamin E can be incorporated in polyethylene. This review provides an overview of the effects of vitamin E incorporation on major complications in total joint arthroplasty: material failure due to oxidative degradation, wear debris and subsequent periprosthetic osteolysis, and prosthetic joint infections. Secondly, this review summarizes the first clinical results of total hip and knee arthroplasties with vitamin E incorporated highly cross-linked polyethylene. Based on in vitro studies, incorporation of vitamin E in polyethylene provides good oxidative protection and preserves low wear rates. Incorporation of vitamin E may have the beneficial effect of reduced inflammatory response to its wear particles. Some microorganisms showed reduced adherence to vitamin E-incorporated UHMWPE; however, clinical relevance is doubtful. Short-term clinical studies of total hip and knee arthroplasties with vitamin E-incorporated highly cross-linked UHMWPE reported good clinical results and wear rates similar to highly cross-linked UHMWPE without vitamin E

Biodegradable vs non-biodegradable antibiotic delivery devices in the treatment of osteomyelitis

Introduction: Chronic osteomyelitis, or bone infection, is a major worldwide cause of morbidity and mortality, as it is exceptionally hard to treat due to patient and pathogen-associated factors. Successful treatment requires surgical debridement together with long-term, high antibiotic concentrations that are best achieved by local delivery devices, either made of degradable or non-degradable materials. Areas covered: Non-degradable delivery devices are frequently constituted by polymethylmethacrylate-based carriers. Drawbacks are the need to remove the carrier (as the carrier itself may provide a substratum for bacterial colonization), inefficient release kinetics and incompatibility with certain antibiotics. These drawbacks have led to the quest for degradable alternatives, but also devices made of biodegradable calcium sulphate, collagen sponges, calcium phosphate or polylactic acids have their specific disadvantages. Expert opinion: Antibiotic treatment of osteomyelitis with the current degradable and non-degradable delivery devices is effective in the majority of cases. Degradable carriers have an advantage over non-degradable carriers that they do not require surgical removal. Synthetic poly(trimethylene carbonate) may be preferred in the future over currently approved lactic/glycolic acids, because it does not yield acidic degradation products. Moreover, degradable poly(trimethylene carbonate) yields a zero-order release kinetics that may not stimulate development of antibiotic-resistant bacterial strains due to the absence of long-term, low-concentration tail-release

A surface-eroding antibiotic delivery system based on poly(trimethylene carbonate)

Biodegradable delivery systems that do not produce acidic compounds during degradation are preferred for local antibiotic delivery in bone infections in order to avoid adverse bone reactions. Poly(trimethylene carbonate) (PTMC) has good biocompatibility, and is such a polymer. The objective of this in vitro study was to explore the suitability of PTMC as an antibiotic releasing polymer for the local treatment of bone infections. Degradation behaviour and corresponding release profiles of gentamicin and vancomycin from slowly degrading PTMC(168) and faster degrading PTMC(339) discs were compared in the absence and presence of a lipase solution. Gentamicin release in the absence of lipase was diffusion-controlled, while vancomycin release was limited. Surface erosion of PTMC only occurred in the presence of lipase. Both antibiotics were released in high concentrations from PTMC in the presence of lipase through a combination of surface erosion and diffusion. This illustrates the major advantage of surface-eroding biodegradable polymers, allowing release of larger antibiotic molecules like vancomycin. (C) 2009 Elsevier Ltd. All rights reserved