41 research outputs found
Reducing the efficiency–stability–cost gap of organic photovoltaics with highly efficient and stable small molecule acceptor ternary solar cells
Investigation of the processing parameters for efficient organic solar cells
The field of organic photovoltaics (OPV) has been attracting great scientific
attention over the last few years. New fields of applications are feasible as OPVs are
lightweight, flexible and have the potential for truly low fabrication cost. At present,
so-called bulk heterojunction structures based on blends of a conjugated polymer as
electron donor and a soluble fullerene derivative as acceptor represent the OPV
material system with the highest power conversion efficiency reported until now.
This thesis addresses several critical parameters in the processing issues of
polymer:fullerene based organic solar cells. Primarily, a sedulous investigation
concerning deposition parameters of an electron blocking-hole transporting interfacial
layer (Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) [PEDOT:PSS]) was
performed. The conductivity and thickness effect of the layer on overall device
performance was analyzed. Then the optically active layer consisting of the reference
poly-3-hexylthiophene and phenyl-C61-butyric acid methyl ester (P3HT:PCBM)
blend material system was investigated. Parameters such as composition ratio, layer
thickness and annealing conditions were examined in order to achieve the reference
organic solar cells for the newly founded Molecular Electronics and Photonics
research unit with optimized and highly reproducible power conversion efficiency
(PCE).
The processing steps described in this thesis yielded P3HT:PCBM devices
with repeatable and consistent PCE performance higher than 3 % and now the process
is used as a standard method to provide the reference solar cells in the Molecular
Electronics and Photonics laboratory. During the processing steps of P3HT:PCBM, a
21
kink in the shape of the current density/voltage (J/V) characteristics was observed.
Devices of different ratios of P3HT to PCBM were fabricated and sent for further
studies at the Jaume University in Spain. The s-shaped characteristics were explained
by capacitance measurements related to the presence of defect bands exhibiting
Gaussian shape located at E approximate to 0.38 eV above the highest occupied
molecular orbital level of the P3HT.
After establishing the reference process for P3HT:PCBM based solar cells new
synthesized conjugated polymers donors were investigated in terms of their potential
for organic solar cell applications. A perfluoro poly[(9,9-dioctylfluorenyl-2,7-diyl)-
alt-5,5- (4’,7’-di-2-thienyl-2’,1’,3’-benzothiadiazole)] (APFO-3) derivative and
different fluorescent boron-dipyrromethene conjugated polymers (BODIPY) were
characterized. Absorption and photo luminescent spectra as well as current density
characteristics of the fabricated photovoltaic devices were compared to commercially
available materials. Despite the exhibited low mobility and PCE values (in the range
of 0.2-1.2 %), some of the newly synthesized polymers, like PBT and PBTT, are
promising electron donors for further synthetic trials due to their high absorption
coefficient and high photovoltage (over 1 V).
Furthermore a systematic study of inkjet printing processing parameters for
organic solar cells applications was followed. Optimum parameters for inkjet printing
active layer were firstly identified, proving that the viscosity of the inkjet formulation,
substrate temperature, drop spacing and the height of the droplet in relation to the
surface are critical factors to achieving high quality inkjet-printed polymer-fullerene
22
based active layers. The last part of the chapter focuses on replacing the expensive
and brittle indium tin oxide (ITO) with an inkjet printed silver grid architecture.
Investigation of an inkjet-printed silver nanoparticle grid combined with different
conductivity PEDOT:PSS was performed. An ultimate control of the design
requirements of current collecting grid based on the proposed inkjet-printed process to
accurately control the uniformity and dimensions of the silver nanoparticle based grid
was achieved. The performed measurements revealed higher transparency of the
printed Ag grid when compared to different thicknesses of ITO. As a result a record
power conversion efficiency of 1.96 % is achieved for ITO-free P3HT:PCBM based
organic solar cells using the combination of PEDOT:PSS/inkjet printed nanoparticles
based current collecting grids.Costas N. Costa (President) Jenny Nelson (Member) Charalambos Doumanidis (Member) Polyvios Eleftheriou (Member)Complete
Two step sintering process and metal grid design optimization for highly efficient ITO free organic photovoltaics
The need for inexpensive alternative to indium doped tin oxide (ITO) transparent electrodes is imminent for cost-efficient solution processed optoelectronic applications. ITO-free transparent electrodes can be based on inkjet-printed Silver (Ag) nanoparticles grids embedded into PEDOT:PSS buffer layers. We present an in-depth investigation of the morphological evolution of the inkjet printed Ag nanopartricle sintering process combined with an ultimate control of the printed grid design requirements for efficient ITO-free organic photovoltaics (OPVs). We report on glass/ITO-free P3HT:PC60BM and Si-PCPDTBT:PC70BM based OPVs with power conversion efficiency of 2.8% and 4.9% respectively. These devices exhibited minimal losses when compared to reference ITO-based OPVs
Conduction mechanisms of P3HT:PCBM solar cell
In order to get a deeper understanding of the conduction mechanisms limiting the electrical characteristics of ITO/PEDOT:PSS/P3HT:PCBM/Al solar cells, dark current-voltage measurements at different temperatures were analyzed using a compact electrical equivalent circuit previously used in p/n junctions. Between 0.2 V and 0.6 V, the current-voltage characteristic is modeled by an exponential term which can be described by Multi-Tunneling Capture Emission process. For larger voltage, the model takes into account Space-Charge Limited process and series resistance. In addition, the model is useful to calculate the built in potential of the solar cell using only dark current- voltage-temperature measurements
Excitation dynamics of a low bandgap silicon-bridged dithiophene copolymer and its composites with fullerenes
We report on excitation dynamics in pristine and bulk heterojunction films of the low bandgap silicon-bridged dithiophene copolymer poly[(4,4′-bis(2-ethylhexyl)dithieno[3,2-b:2′, 3′-d]silole)-2,6-diyl-alt-(4,7-bis(2-thienyl)-2,1,3-benzothiadiazole)-5,5′-diyl] with methanofullerene derivatives. The combination of ultrafast transient transmission and photoluminescence allows us to probe the relaxation of both exciton and polaron states in a relatively wide spectral and temporal range. Measurements reveal that the majority of excitations undergo ultrashort non-radiative relaxation while a small fraction of the photoexcited species decays slowly within hundreds of ps. In the blend films, significantly longer decays are observed suggesting the presence of long lived holes and/or charged-transfer type of exciton
Synergistic effects of buffer layer processing additives for enhanced hole carrier selectivity in inverted Organic Photovoltaics
Solution based inverted Organic Photovoltaic (OPVs) usually use Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) derivatives combined with pristine processing additives as hole selective contact on top of the hydrophobic conjugated polymer:fullerene active layer. In this study, PEDOT:PSS based hole selective contact is treated with two different boiling point additives, 2,5,8,11-tetramethyl-6-dodecyn-5,8-diol ethoxylate (Dynol) and Zonyl FS-300 fluorosurfactant (Zonyl). Although corresponding inverted OPVs using the above PEDOT:PSS:Additives show similar power conversion efficiency (PCE) values, the mechanisms of their implementation on inverted OPV operation are not identical. By understanding the synergistic effects of PEDOT:PSS processing additives on the hole selectivity of inverted OPVs we demonstrate a novel combination of PEDOT:PSS additives mixture as an effective route to further increase the hole selectivity, reliability andpower conversion efficiency of inverted OPVs
Synergistic effects of buffer layer processing additives for enhanced hole carrier selectivity in inverted Organic Photovoltaics
Solution based inverted Organic Photovoltaic (OPVs) usually use Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) derivatives combined with pristine processing additives as hole selective contact on top of the hydrophobic conjugated polymer:fullerene active layer. In this study, PEDOT:PSS based hole selective contact is treated with two different boiling point additives, 2,5,8,11-tetramethyl-6-dodecyn-5,8-diol ethoxylate (Dynol) and Zonyl FS-300 fluorosurfactant (Zonyl). Although corresponding inverted OPVs using the above PEDOT:PSS:Additives show similar power conversion efficiency (PCE) values, the mechanisms of their implementation on inverted OPV operation are not identical. By understanding the synergistic effects of PEDOT:PSS processing additives on the hole selectivity of inverted OPVs we demonstrate a novel combination of PEDOT:PSS additives mixture as an effective route to further increase the hole selectivity, reliability andpower conversion efficiency of inverted OPVs
Highly Efficient Indium Tin Oxide-free Organic Photovoltaics Using Inkjet-printed Silver Nanoparticle Current Collecting Grids
We report an in-depth investigation of an inkjet-printed silver (Ag) nanoparticle grid combined
with poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) of different
conductivities as an alternative to an indium tin oxide (ITO)-based transparent anode for
organic solar cell applications. The reported measurements revealed higher transparency of the
inkjet-printed Ag nanoparticle-based grid when compared to different thicknesses of ITO on
glass substrates. Based on the proposed current collecting grid, a record power conversion
efficiency of 2% is achieved for ITO-free organic solar cell