Simulating the ideal geometrical and biomechanical parameters of the pulmonary autograft to prevent failure in the Ross operation

OBJECTIVES: Reinforcements for the pulmonary autograft (PA) in the Ross operation have been introduced to avoid the drawback of conduit expansion and failure. With the aid of an in silico simulation, the biomechanical boundaries applied to a healthy PA during the operation were studied to tailor the best implant technique to prevent reoperation. METHODS: Follow-up echocardiograms of 66 Ross procedures were reviewed. Changes in the dimensions and geometry of reinforced and non-reinforced PAs were evaluated. Miniroot and subcoronary implantation techniques were used in this series. Mechanical stress tests were performed on 36 human pulmonary and aortic roots explanted from donor hearts. Finite element analysis was applied to obtain high-fidelity simulation under static and dynamic conditions of the biomechanical properties and applied stresses on the PA root and leaflet and the similar components of the native aorta. RESULTS: The non-reinforced group showed increases in the percentages of the mean diameter that were significantly higher than those in the reinforced group at the level of the Valsalva sinuses (3.9%) and the annulus (12.1%). The mechanical simulation confirmed geometrical and dimensional changes detected by clinical imaging and demonstrated the non-linear biomechanical behaviour of the PA anastomosed to the aorta, a stiffer behaviour of the aortic root in relation to the PA and similar qualitative and quantitative behaviours of leaflets of the 2 tissues. The annulus was the most significant constraint to dilation and affected the distribution of stress and strain within the entire complex, with particular strain on the sutured regions. The PA was able to evenly absorb mechanical stresses but was less adaptable to circumferential stresses, potentially explaining its known dilatation tendency over time. CONCLUSIONS: The absence of reinforcement leads to a more marked increase in the diameter of the PA. Preservation of the native geometry of the PA root is crucial; the miniroot technique with external reinforcement is the most suitable strategy in this context

Micro Concentrator Concept for Cost Reduction and Efficiency Enhancement of Thin Film Chalcopyrite Photovoltaics Results from EU Joint Research Program CHEETAH

Results for research on chalcopyrite micro concentrator solar cells obtained within the framework of CHEETAH joint program are shown. A top down proof of concept study reveals close to 30 relative efficiency increase under light concentration using inkjet printed CIGSSe. A novel bottom up approach for local chalcopyrite absorbers grown from indium islands demonstrates working CISe micro cells. Millimeter sized lenses are fabricated from PMMA by a casting process to be applied as concentrator optics. For a combined exploitation of direct and diffuse light components an angular splitting concentrator based on chalcopyrite and kesterite absorber material is proposed. The scientific innovation brought will enrich further development of CIGSe solar cells and contribute to their relevance in photovoltaic energy productio

Composition, production and procurement of glass at San Vincenzo: an early medieval monastic complex in southern Italy

136 glasses from the ninth-century monastery of San Vincenzo and its workshops have been analysed by electron microprobe in order to situate the assemblage within the first millennium CE glass making tradition. The majority of the glass compositions can be paralleled by Roman glass from the first to third centuries, with very few samples consistent with later compositional groups. Colours for trailed decoration on vessels, for vessel bodies and for sheet glass for windows were largely produced by melting the glass tesserae from old Roman mosaics. Some weakly-coloured transparent glass was obtained by re-melting Roman window glass, while some was produced by melting and mixing of tesserae, excluding the strongly coloured cobalt blues. Our data suggest that to feed the needs of the glass workshop, the bulk of the glass was removed as tesserae and windows from a large Roman building. This is consistent with a historical account according to which the granite columns of the monastic church were spolia from a Roman temple in the region. The purported shortage of natron from Egypt does not appear to explain the dependency of San Vincenzo on old Roman glass. Rather, the absence of contemporary primary glass may reflect the downturn in long-distance trade in the later first millennium C.E., and the role of patronage in the “ritual economy” founded upon donations and gift-giving of the time

Early career members at the ers international congress 2017: Highlights from the assemblies

The 2017 ERS International Congress was, as always, well organised, providing participants with a good mixture of translational and clinical science. Early career members were very well represented in thematic poster, poster discussion and oral presentation sessions and were also actively involved in chairing sessions. The efforts of the Early Career Members Committee (ECMC) to increase the number of early career members included in the competence list (the list of early career members with an interest in being more actively involved in the society) paid off immensely, because the number of early career members registered improved hugely across all assemblies after the Congress. Several newly registered early career members have collated some highlights of the Congress for their assemblies, which should be of interest to all members. As assemblies 12 and 13 are new, there is no report from assembly 12 as there is not yet, at the time of writing, an early career member representative for this newly created assembly

Late Byzantine Mineral Soda High Alumina Glasses from Asia Minor: A New Primary Glass Production Group

The chemical characterisation of archaeological glass allows the discrimination between different glass groups and the identification of raw materials and technological traditions of their production. Several lines of evidence point towards the large-scale production of first millennium CE glass in a limited number of glass making factories from a mixture of Egyptian mineral soda and a locally available silica source. Fundamental changes in the manufacturing processes occurred from the eight/ninth century CE onwards, when Egyptian mineral soda was gradually replaced by soda-rich plant ash in Egypt as well as the Islamic Middle East. In order to elucidate the supply and consumption of glass during this transitional period, 31 glass samples from the assemblage found at Pergamon (Turkey) that date to the fourth to fourteenth centuries CE were analysed by electron microprobe analysis (EPMA) and by laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS). The statistical evaluation of the data revealed that the Byzantine glasses from Pergamon represent at least three different glass production technologies, one of which had not previously been recognised in the glass making traditions of the Mediterranean. While the chemical characteristics of the late antique and early medieval fragments confirm the current model of glass production and distribution at the time, the elemental make-up of the majority of the eighth- to fourteenth-century glasses from Pergamon indicate the existence of a late Byzantine glass type that is characterised by high alumina levels. Judging from the trace element patterns and elevated boron and lithium concentrations, these glasses were produced with a mineral soda different to the Egyptian natron from the Wadi Natrun, suggesting a possible regional Byzantine primary glass production in Asia Minor

Glass groups, glass supply and recycling in late Roman Carthage

Carthage played an important role in maritime exchange networks during the Roman and late antique periods. One hundred ten glass fragments dating to the third to sixth centuries CE from a secondary deposit at the Yasmina Necropolis in Carthage have been analysed by electron microprobe analysis (EPMA) to characterise the supply of glass to the city. Detailed bivariate and multivariate data analysis identified different primary glass groups and revealed evidence of extensive recycling. Roman mixed antimony and manganese glasses with MnO contents in excess of 250 ppm were clearly the product of recycling, while iron, potassium and phosphorus oxides were frequent contaminants. Primary glass sources were discriminated using TiO2 as a proxy for heavy minerals (ilmenite/spinel), Al2O3 for feldspar and SiO2 for quartz in the glassmaking sands. It was thus possible to draw conclusions about the chronological and geographical attributions of the primary glass types. Throughout much of the period covered in this study, glassworkers in Carthage utilised glass from both Egyptian and Levantine sources. Based on their geochemical characteristics, we conclude that Roman antimony and Roman manganese glasses originated from Egypt and the Levant, respectively, and were more or less simultaneously worked at Carthage in the fourth century as attested by their mixed recycling (Roman Sb-Mn). In the later fourth and early fifth centuries, glasses from Egypt (HIMT) and the Levant (two Levantine I groups) continued to be imported to Carthage, although the Egyptian HIMT is less well represented at Yasmina than in many other late antique glass assemblages. In contrast, in the later fifth and sixth centuries, glass seems to have been almost exclusively sourced from Egypt in the form of a manganese-decolourised glass originally described and characterised by Foy and colleagues (2003). Hence, the Yasmina assemblage testifies to significant fluctuations in the supply of glass to Carthage that require further attention

Scaling the state: Egypt in the third millennium BC

Discussions of the early Egyptian state suffer from a weak consideration of scale. Egyptian archaeologists derive their arguments primarily from evidence of court cemeteries, elite tombs, and monuments of royal display. The material informs the analysis of kingship, early writing, and administration but it remains obscure how the core of the early Pharaonic state was embedded in the territory it claimed to administer. This paper suggests that the relationship between centre and hinterland is key for scaling the Egyptian state of the Old Kingdom (ca. 2,700-2,200 BC). Initially, central administration imagines Egypt using models at variance with provincial practice. The end of the Old Kingdom demarcates not the collapse, but the beginning of a large-scale state characterized by the coalescence of central and local models