Structural and Electrical Properties of TiO2 Thin Film Derived from Sol-gel Method using Titanium (IV) Butoxide

Fabrication of titanium dioxide (TiO2) thin film on microscope glass using sol-gel method has been studied intensively. The starting materials were titanium (IV) butoxide, ethanol, acetic acid, triton x-100, hydrochloric acid and deionized water. The materials were mixed together to form the sols. Then, the heat and ageing treatment was applied to form stable sols. The sols were then spin coated on the glass substrate to form the homogenous and transparent TiO2 thin film. The TiO2 thin film was coated at several layers using specific conditions. To evaluate the performance of thin film, the crystallinity of the thin film was determined by using the x-ray diffractometer  (XRD). The change on the surface morphology was observed using atomic force microscope (AFM). The electrical property of the thin film was determined by doing the current-voltage (I-V) analysis on the thin film. It has been successfully shown that the anatase crystalline phase was observed when the TiO2 thin film was heated at 500°C. The roughness and the crystalline phase of TiO2 thin film changed drastically with the growth conditions. Finally, the effect of film preparation to the film resistivity also showed a critical aspect where we should take into account during the preparation of TiO2 thin film

Study on Morphological Properties of Polyvinyl Alcohol/Poly(lactic acid) Wound Dressing Membrane as Drug Delivery Carrier in Wound Healing Treatment

Wound dressing have experienced continuous improvement and changes since ancient time. Electrospinning of polymeric nanofibers have captured the interest of researchers due to its simplicity and cost effective technique that able to produce wound dressing membrane that meet the requirement as ideal wound dressing and drug delivery carrier. In this work, polyvinyl alcohol (PVA) and poly (lactic acid) (PLA) were chosen polymer to produce wound dressing membrane through electrospinning and coating method. PVA was electrospun and then coated with PLA. The aim of this study was to investigate the morphological properties of PVA/PLA wound dressing membrane. Based on the results from Atomic Force Microscope, PVA nanofiber coated with 4% PLA exhibit the highest value of Rq which is 0.47 ± 0.19 μm compared to neat PVA nanofibers membrane. Field Emission Scanning Electron Microscope (FE-SEM) image revealed that PVA nanofiber coated with 4% PLA shows porous fiber-like morphology and well incorporated with each other without any gap formed between them. This report clearly suggestive of the fact that synthetic biodegradable polymers such as PLA can be exploited for the synergistic combination with PVA nanofiber for wound dressing application

Sharp edges schottky contact electric field simulation

This paper reports investigation on effect of adding sharp edges to Schottky contact. Few studies suggested that sharp edge nanostructures produces high electric field which subsequently improve gas sensing performance on reversed biased mode. Three different shapes: circular-, hexagon- and star-shape were modeled by using COMSOL Multiphysics. The study on effects of different sizes sharp edges Schottky contact also reported. Electric field was observed and it shows that star-shape yields highest summation of electric field 2.79 x 109 V/m and lowest electric field observed at circular-shape 7 x 107 V/m. The results also revealed that distance of sharp edges from substrate edge affects the magnitude of electric field

Nanofabrication Process by Reactive Ion Etching of Polystyrene Nanosphere on Silicon Surface

Nanospheres made of organic polymer have been applied to generate various patterning mask in fabricating functional nanostructures. The patterning and generation of semiconductor nanostructures through nanospheres mask provides a potential alternative to the conventional top-down fabrication techniques. Polystyrene nanosphere was modified using reactive ion etching (RIE) with O2 plasma at various duration of exposure (0, 20, 40 sec) and further extended to produce nanostructure by employing combination of O2 and mixed CHF3/SF6 gases. These edge PS nanospheres are later reduced as nanostructures and characterized using various characterization techniques such as Field Emission Scan Electron Microscopy/Energy Dispersive X-ray Spectroscopy (FESEM)/EDS, Atomic Force Microscopy and Fourier Transformation Infrared Spectroscopy (FTIR). The potential for multi stages etching procedures of O2 and later with SF6/CHF3 plasma etching are found to modify the nanospheres shapes and sizes which are important either as secondary mask for metal evaporation or as direct patterning of carbonaceous materials when exposed to irradiation sources. The nanostructures made using RIE will have applications in low power high performance electronic devices, optoelectronic, photovoltaic, biosensors and lithium ion battery devices

Synthesis of Gold Nanorices on ITO Substrate Using Silver Seed-Mediated Growth Method

Herein, we propose a seed-mediated growth method for synthesis of gold nanorices directly grown on the substrate using silver seed. The as prepared sample was characterized using UV-Vis spectrometer, field emission scanning electron microscopy (FESEM), and X-Ray diffraction (XRD). The UV-Vis spectrum of the sample shows transversal surface plasmon resonance (t-SPR) peak at wavelength 541 nm and longitudinal surface plasmon resonance (l-SPR) peak at wavelength 730 nm. The FESEM image confirmed the morphology of gold nanostructures are rice-like shape. Typically, the nanorices have long axis (a) 55.54±3.30 nm, short axis (b) 28.71±2.30 nm, and aspect ratio (a/b) 1.98±0.09. The XRD pattern of the sample at diffraction angle (2θ) in the range of 10º-70º reveals three peaks at 38.18º, 44.48º, and 64.67º which corresponding to (111), (200), and (220) Bragg’s reflection of face centers cubic lattice Gold (ICSD file No. 98-005-3763). The strong peak intensity at 38.18º represents the nanorices growth in the (111) direction. The gold nanostructures with rice-like shape which exhibit two localized surface plasmon resonance (LSPR) thus it has very potential for application in plasmonic sensin

Influence of hydrochloric acid volume on the growth of titanium dioxide (tio2) nanostructures by hydrothermal method

Titanium dioxide (TiO2) with various morphologies has been successfully synthesized by a simple hydrothermal method at 150oC for 10 h using titanium butoxide (TBOT) as a precursor, deionized (DI) water and hydrochloric acid (HCl) on a fluorine-doped tin oxide (FTO) substrate. The influences of HCl volume on structural and morphological properties of TiO2 have been studied using x-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM), respectively. The result showed that several morphologies such as microsphere, microrods, nanorods and nanoflowers were obtained by varying the volume of hydrochloric acid. The crystallinity of titanium dioxide enhanced with the increasing of hydrochloric acid volume

An Optimization of Nanostructure Aluminum on Porous Silicon at Different Aluminum Thickness

The growth of aluminum nanostructure was conducted on porous silicon substrate by depositing a layer of aluminum via thermal evaporation method. The deposition process of the aluminum nanostructure was under the annealing temperature at 350°C for 1 hour. The weight of aluminum was varied for each sample in order to obtain different thickness of aluminum deposited on the sample. The weight of aluminum used in this experiment were 12mg ,18mg ,50mg and 74mg with the corresponding aluminum thickness deposited of 112nm, 163nm, 205nm and 332nm. Characterization on the morphology of the sample are conducted by using Atomic force microscopy (AFM), Raman spectroscopy and IV measurements. Based on the result obtained, the optimum weight of aluminum was 50mg of aluminum since it is provide the higher conductivity value on the sample