Diagnostic Validity of the Physical Examination Maneuvers for Hip Pathology: A Systematic Review

Background: There is a number of physical examination maneuvers used to diagnose hip pathology but the diagnostic validity of these maneuvers is unclear. We conducted a systematic review to evaluate current knowledge regarding the diagnostic validity of the physical examination maneuvers for hip pathology. Methods: We conducted a literature search of the electronic databases MEDLINE, CINAHL, EMBASE, Cochrane, and SPORTDiscus. The methodological quality of each eligible study was assessed and classified according to Sackett and Haynes’ phases of diagnostic research, whereby Phase I and II studies represent proof of concept and Phase III studies are applicable to a clinical setting. Results: Eight studies were classified as phase III diagnostic studies, four of which were methodologically rigorous. In diagnosing labral tears of the hip, neither the impingement test (sensitivity=0.51-0.78, specificity=0.10-0.89) nor FABER test (sensitivity=0.60, specificity=0.75) demonstrated evidence to support the use of these tests clinically. In diagnosing gluteal tendon pathology the Trendelenburg test demonstrated some evidence for use in a clinical setting (sensitivity=0.23-0.73, specificity=0.77-0.94). Conclusion: The diagnostic validity of clinical tests to diagnose the presence or absence of hip pathology remains uncertain. The majority of studies supporting validity of these tests lacked methodological rigor, and thus cannot provide evidence to support the use of a test in clinical practice

Three femoral stem designs without corrosion: A review of 2095 stems

© 2020 Naudie et al. Introduction: Corrosion at the head–neck interface of modular components in total hip arthroplasty (THA) has been reported as a cause of failure of modern total hip replacement implants. While this method of failure has been well described, it remains poorly understood. The purpose of this study is to review the three most commonly used uncemented femoral stems at our institution over the last fifteen years and to correlate any established risk factors with rates of revision, particularly corrosion. Methods: We reviewed 2095 patients from March 2000 to September 2015 who underwent total hip arthroplasty with one of three uncemented femoral stem designs. All stems were made of a Ti6Al4V alloy with a 12/14 taper design. We included only those stems coupled with a CoCr head and a highly crosslinked polyethylene liner. We evaluated age, gender, body mass index (BMI), femoral head size, head length, neck angle and offset and correlated these to the incidence of all cause revision, as well as revision excluding infection. Results: There were no recognized corrosion-related revisions identified. There was no association between age, BMI, gender, head length, neck angle and offset to all cause revision or revision with infection excluded (p\u3e0.05). Femoral head size less than 32mm was associated with higher all cause revision rates (OR 4.60 (95% CI 1.8, 11.8)) and when excluding infection as a reason for revision (OR 4.94 (95% CI 1.7, 14.41)). Conclusion: Over the last fifteen years, we have not identified any cases of corrosion with the three most commonly used femoral stems used at out institution. While we acknowledge that no femoral stem is immune to corrosion, certain femoral stem designs may be uniquely resistant to this mode of failure. Level of Evidence: III

Management of chronic lateral instability due to lateral collateral ligament deficiency after total knee arthroplasty: a case report

<p>Abstract</p> <p>Introduction</p> <p>Lateral instability following total knee arthroplasty (TKA) is a rare condition with limited report of treatment options. The objective of this case presentation is to demonstrate the outcomes of different surgical procedures performed in a single patient with lateral collateral ligament (LCL) deficiency.</p> <p>Case presentation</p> <p>We present a case of chronic lateral instability due to LCL deficiency after primary TKA in a 47-year-old Caucasian woman with an obesity problem. Multiple treatment options have been performed in order to manage this problem, including the following: ligament reconstruction; combined ligament reconstruction and constrained implant; and rotating-hinge knee prosthesis that was the most recent surgery. All ligament reconstruction procedures failed within one year. The varus-valgus constrained prosthesis provided stability for six years.</p> <p>Conclusions</p> <p>Ligament reconstruction alone cannot provide enough stability for the treatment of chronic lateral instability in patients with obesity problems and LCL deficiency. When the reconstruction fails, a salvage procedure with rotating-hinge knee is still available.</p

High Tibial Osteotomy

High tibial osteotomy (HTO) is a widely performed procedure to treat medial knee arthrosis. In general, published studies on HTO report good long-term results with a correct patient selection and a precise surgical technique. The ideal candidate for an HTO is a middle aged patient (60 to 65 years of age), with isolated medial osteoarthritis, with good range of motion and without ligamentous instability. Some issues that need resolution remain; these include the choice between opening and closing wedge tibial osteotomy, the graft selection in opening wedge osteotomies, the type of fixation, the comparison with unicompartmental knee arthroplasty and whether HTO significantly affects a subsequent total joint replacement. Precise indication, preoperative planning, and operative technique selection are essential to achieve good results

High tibial osteotomy in Sweden, 1998–2007: A population-based study of the use and rate of revision to knee arthroplasty

To access publisher's full text version of this article. Please click on the hyperlink in Additional Links field.Most studies on high tibial osteotomies (HTOs) have been hospital-based and have included a limited number of patients. We evaluated the use and outcome-expressed as rate of revision to knee arthroplasty-of HTO performed in Sweden with 9 million inhabitants, 1998-2007. 3, 161 HTO procedures on patients 30 years or older (69% men) who were operated on for knee osteoarthritis in Sweden, 1998-2007, were identified through the inpatient and outpatient care registers of the Swedish National Board of Health and Welfare. Pertinent data were verified through surgical records. Conversions of HTO to knee arthroplasty before 2010 were identified through the Swedish Knee Arthroplasty Register (SKAR). The 10-year survival was determined using revision to an arthroplasty as the endpoint. The number of HTOs decreased by one third between 1998 and 2007, from 388 operations a year to 257 a year. Most of the HTOs were performed with open wedge osteotomy using external fixation. The cumulative revision rate at 10 years was 30% (95% CI: 28-32). The risk of revision increased with increasing age and was higher in women than in men (RR = 1.3, CI: 1.1-1.5). If being without an artificial joint implant is considered to be beneficial, then HTO is an excellent alternative to knee arthroplasty in younger and/or physically active patients suffering from knee osteoarthritis.Swedish Research Council Swedish Rheumatism Association King Gustaf V 80-year Birthday Fund Faculty of Medicine, Lund University Region Skan

Patient and surgery related factors associated with fatigue type polyethylene wear on 49 PCA and DURACON retrievals at autopsy and revision

<p>Abstract</p> <p>Background</p> <p>Polyethylene wear is an important factor for longevity of total knee arthroplasty. Proven and suspicious factors causing wear can be grouped as material, patient and surgery related. There are more studies correlating design and/or biomaterial factors to in vivo wear than those to patient and surgery related factors. Many retrieval studies just include revision implants and therefore may not be representative. This study is aimed to correlate patient- and surgery- related factors to visual wear score by minimizing design influence and include both autopsy and revision implants. Comparison between the groups was expected to unmask patient and surgery-related factors responsible for wear.</p> <p>Methods</p> <p>The amount of joint side wear on polyethylene retrievals was measured using a modification of an established visual wear score. Fatigue type wear was defined as summation of the most severe wear modes of delamination, pitting and cracks. Analysis of patient and surgery related variables suspicious to cause wear included prospectively sampled patient activity which was measured by self reported walking capacity. Statistical analysis was done by univariate analysis of variance. Activity level and implantation time were merged to an index of use and correlated to the wear score.</p> <p>Results</p> <p>Wear score after comparable implantation time was significantly less in the autopsy group. Even so, fatigue type wear accounted for 84 and 93 % of total wear score on autopsy and revision implants respectively. A highly significant influence on wear score was found in time of implantation (p = 0.002), level of activity (p = 0.025) and inserts belonging to revision group (p = 0.006). No influence was found for the kind of patella replacement (p = 0.483). Body mass index and accuracy of component alignment had no significant influence on visual wear score. Fatigue-type wear in the medial compartment was closely correlated to the index of use in the autopsy (R²= 0.383) and the revision group (R²= 0.813).</p> <p>Conclusion</p> <p>The present study's finding of substantial fatigue type wear in both autopsy and revision retrievals supports the theory that polyethylene fatigue strength is generally exceeded in this type of prosthesis. Furthermore, this study correlated fatigue-type polyethylene wear to an index of use as calculated by activity over time. Future retrieval studies may use activity over time as an important patient related factor correlated to the visual wear score. When evaluating total knee arthroplasty routine follow up, the surgeon must think of substantial wear present even without major clinical signs.</p

Rupture of Posterior Cruciate Ligament: Diagnosis and Treatment Principles

Posterior cruciate ligament (PCL) injuries associated with multiple ligament injuries can be easily diagnosed, but isolated PCL tears are less symptomatic, very difficult to diagnose, and frequently misdiagnosed. If a detailed investigation of the history of illness suggests a PCL injury, careful physical examinations including the posterior drawer test, dial test, varus and valgus test should be done especially if the patient complains of severe posterior knee pain in >90° of flexion. Vascular assessment and treatment should be done to avoid critical complications. An individualized treatment plan should be established after consideration of the type of tear, time after injury, associated collateral ligament injuries, bony alignment, and status of remnant. The rehabilitation should be carried out slower than that after anterior cruciate ligament reconstruction

Pre-surgical radiologic identification of peri-prosthetic osteolytic lesions around TKRs: a pre-clinical investigation of diagnostic accuracy

Background: Emerging longitudinal data appear to demonstrate an alarming trend towards an increasing prevalence of osteolysis-induced mechanical failure, following total knee replacement (TKR). Even with high-quality multi-plane X-rays, accurate pre-surgical evaluation of osteolytic lesions is often difficult. This is likely to have an impact on surgical management and provides reasonable indication for the development of a model allowing more reliable lesion assessment. The aim of this study, using a simulated cadaver model, was to explore the accuracy of rapid spiral computed tomography (CT) examination in the non-invasive evaluation of peri-prosthetic osteolytic lesions, secondary to TKR, and to compare this to conventional X-ray standards. Methods: A series of nine volume-occupying defects, simulating osteolytic lesions, were introduced into three human cadaveric knees, adjacent to the TKR implant components. With implants in situ, each knee was imaged using a two-stage conventional plain X-ray series and rapid-acquisition spiral CT. A beam-hardening artefact removal algorithm was employed to improve CT image quality. After random image sorting, 12 radiologists were independently shown the series of plain X-ray images and asked to note the presence, anatomic location and 'size' of osteolytic lesions observed. The same process was repeated separately for review of the CT images. The corresponding X-ray and CT responses were directly compared to elicit any difference in the ability to demonstrate the presence and size of osteolytic lesions. Results: Access to CT images significantly improved the accuracy of recognition of peri-prosthetic osteolytic lesions when compared to AP and lateral projections alone (P = 0.008) and with the addition of bi-planar oblique X-rays (P = 0.03). No advantage was obtained in accuracy of identification of such lesions through the introduction of the oblique images when compared with the AP and lateral projections alone (P = 0.13) Conclusion: The findings of this study suggest that peri-prosthetic osteolytic lesions can be reliably described non-invasively using a simple, rapid-acquisition CT-based imaging approach. The low sensitivity of conventional X-ray, even with provision of supplementary bi-planar 45° oblique views, suggests a limited role for use in situ for TKR implant screening where peri-prosthetic osteolytic lesions are clinically suspected. In contrast, the accuracy of CT evaluation, linked to its procedural ease and widespread availability, may provide a more accurate way of evaluating osteolysis around TKRs, at routine orthopaedic follow up. These findings have direct clinical relevance, as accurate early recognition and classification of such lesions influences the timing and aggressiveness of surgical and non-operative management strategies, and also the nature and appropriateness of planned implant revision or joint-salvaging osteotomy procedures.Timothy P. Kurmis, Andrew P. Kurmis, David G. Campbell and John P. Slavotine

Role of high tibial osteotomy in chronic injuries of posterior cruciate ligament and posterolateral corner

High tibial osteotomy (HTO) is a surgical procedure used to change the mechanical weight-bearing axis and alter the loads carried through the knee. Conventional indications for HTO are medial compartment osteoarthritis and varus malalignment of the knee causing pain and dysfunction. Traditionally, knee instability associated with varus thrust has been considered a contraindication. However, today the indications include patients with chronic ligament deficiencies and malalignment, because an HTO procedure can change not only the coronal but also the sagittal plane of the knee. The sagittal plane has generally been ignored in HTO literature, but its modification has a significant impact on biomechanics and joint stability. Indeed, decreased posterior tibial slope causes posterior tibia translation and helps the anterior cruciate ligament (ACL)-deficient knee. Vice versa, increased tibial slope causes anterior tibia translation and helps the posterior cruciate ligament (PCL)-deficient knee. A review of literature shows that soft tissue procedures alone are often unsatisfactory for chronic posterior instability if alignment is not corrected. Since limb alignment is the most important factor to consider in lower limb reconstructive surgery, diagnosis and treatment of limb malalignment should not be ignored in management of chronic ligamentous instabilities. This paper reviews the effects of chronic posterior instability and tibial slope alteration on knee and soft tissues, in addition to planning and surgical technique for chronic posterior and posterolateral instability with HTO