29 research outputs found
The NANOGrav 12.5-Year Data Set: Polarimetry and Faraday Rotation Measures from Observations of Millisecond Pulsars with the Green Bank Telescope
In this work, we present polarization profiles for 23 millisecond pulsars
observed at 820 MHz and 1500 MHz with the Green Bank Telescope as part of the
NANOGrav pulsar timing array. We calibrate the data using Mueller matrix
solutions calculated from observations of PSRs B1929+10 and J1022+1001. We
discuss the polarization profiles, which can be used to constrain pulsar
emission geometry, and present both the first published radio polarization
profiles for nine pulsars and the discovery of very low intensity average
profile components ("microcomponents") in four pulsars. Using the Faraday
rotation measures, we measure for each pulsar and use it to calculate the
Galactic magnetic field parallel to the line of sight for different lines of
sight through the interstellar medium. We fit for linear and sinusoidal trends
in time in the dispersion measure and Galactic magnetic field and detect
magnetic field variations with a period of one year in some pulsars, but
overall find that the variations in these parameters are more consistent with a
stochastic origin.Comment: 35 pages, 21 figures. Accepted to Ap
The NANOGrav 12.5-Year Data Set: Dispersion Measure Mis-Estimation with Varying Bandwidths
Noise characterization for pulsar-timing applications accounts for
interstellar dispersion by assuming a known frequency-dependence of the delay
it introduces in the times of arrival (TOAs). However, calculations of this
delay suffer from mis-estimations due to other chromatic effects in the
observations. The precision in modeling dispersion is dependent on the observed
bandwidth. In this work, we calculate the offsets in infinite-frequency TOAs
due to mis-estimations in the modeling of dispersion when using varying
bandwidths at the Green Bank Telescope. We use a set of broadband observations
of PSR J1643-1224, a pulsar with an excess of chromatic noise in its timing
residuals. We artificially restricted these observations to a narrowband
frequency range, then used both data sets to calculate residuals with a timing
model that does not include short-scale dispersion variations. By fitting the
resulting residuals to a dispersion model, and comparing the ensuing fitted
parameters, we quantify the dispersion mis-estimations. Moreover, by
calculating the autocovariance function of the parameters we obtained a
characteristic timescale over which the dispersion mis-estimations are
correlated. For PSR J1643-1224, which has one of the highest dispersion
measures (DM) in the NANOGrav pulsar timing array, we find that the
infinite-frequency TOAs suffer from a systematic offset of ~22 microseconds due
to DM mis-estimations, with correlations over ~1 month. For lower-DM pulsars,
the offset is ~7 microseconds. This error quantification can be used to provide
more robust noise modeling in NANOGrav's data, thereby increasing sensitivity
and improving parameter estimation in gravitational wave searches.Comment: 15 pages, 7 figure
The NANOGrav 12.5-Year Data Set:Dispersion Measure Misestimations with Varying Bandwidths
Noise characterization for pulsar-timing applications accounts for interstellar dispersion by assuming a known frequency dependence of the delay it introduces in the times of arrival (TOAs). However, calculations of this delay suffer from misestimations due to other chromatic effects in the observations. The precision in modeling dispersion is dependent on the observed bandwidth. In this work, we calculate the offsets in infinite-frequency TOAs due to misestimations in the modeling of dispersion when using varying bandwidths at the Green Bank Telescope. We use a set of broadband observations of PSR J1643−1224, a pulsar with unusual chromatic timing behavior. We artificially restricted these observations to a narrowband frequency range, then used both the broad- and narrowband data sets to calculate residuals with a timing model that does not account for time variations in the dispersion. By fitting the resulting residuals to a dispersion model and comparing the fits, we quantify the error introduced in the timing parameters due to using a reduced frequency range. Moreover, by calculating the autocovariance function of the parameters, we obtained a characteristic timescale over which the dispersion misestimates are correlated. For PSR J1643−1224, which has one of the highest dispersion measures (DM) in the NANOGrav pulsar timing array, we find that the infinite-frequency TOAs suffer from a systematic offset of ∼22 μs due to incomplete frequency sampling, with correlations over about one month. For lower-DM pulsars, the offset is ∼7 μs. This error quantification can be used to provide more robust noise modeling in the NANOGrav data, thereby increasing the sensitivity and improving the parameter estimation in gravitational wave searches
The NANOGrav 15-year Data Set: Search for Anisotropy in the Gravitational-Wave Background
The North American Nanohertz Observatory for Gravitational Waves (NANOGrav)
has reported evidence for the presence of an isotropic nanohertz gravitational
wave background (GWB) in its 15 yr dataset. However, if the GWB is produced by
a population of inspiraling supermassive black hole binary (SMBHB) systems,
then the background is predicted to be anisotropic, depending on the
distribution of these systems in the local Universe and the statistical
properties of the SMBHB population. In this work, we search for anisotropy in
the GWB using multiple methods and bases to describe the distribution of the
GWB power on the sky. We do not find significant evidence of anisotropy, and
place a Bayesian upper limit on the level of broadband anisotropy such
that . We also derive conservative estimates on the
anisotropy expected from a random distribution of SMBHB systems using
astrophysical simulations conditioned on the isotropic GWB inferred in the
15-yr dataset, and show that this dataset has sufficient sensitivity to probe a
large fraction of the predicted level of anisotropy. We end by highlighting the
opportunities and challenges in searching for anisotropy in pulsar timing array
data.Comment: 19 pages, 11 figures; submitted to Astrophysical Journal Letters as
part of Focus on NANOGrav's 15-year Data Set and the Gravitational Wave
Background. For questions or comments, please email [email protected]
The NANOGrav 12.5 yr Data Set: A Computationally Efficient Eccentric Binary Search Pipeline and Constraints on an Eccentric Supermassive Binary Candidate in 3C 66B
The radio galaxy 3C 66B has been hypothesized to host a supermassive black hole binary (SMBHB) at its center based on electromagnetic observations. Its apparent 1.05 yr period and low redshift (∼0.02) make it an interesting testbed to search for low-frequency gravitational waves (GWs) using pulsar timing array (PTA) experiments. This source has been subjected to multiple searches for continuous GWs from a circular SMBHB, resulting in progressively more stringent constraints on its GW amplitude and chirp mass. In this paper, we develop a pipeline for performing Bayesian targeted searches for eccentric SMBHBs in PTA data sets, and test its efficacy by applying it to simulated data sets with varying injected signal strengths. We also search for a realistic eccentric SMBHB source in 3C 66B using the NANOGrav 12.5 yr data set employing PTA signal models containing Earth term-only as well as Earth+pulsar term contributions using this pipeline. Due to limitations in our PTA signal model, we get meaningful results only when the initial eccentricity e 0 < 0.5 and the symmetric mass ratio η > 0.1. We find no evidence for an eccentric SMBHB signal in our data, and therefore place 95% upper limits on the PTA signal amplitude of 88.1 ± 3.7 ns for the Earth term-only and 81.74 ± 0.86 ns for the Earth+pulsar term searches for e 0 < 0.5 and η > 0.1. Similar 95% upper limits on the chirp mass are (1.98 ± 0.05) × 109 and (1.81 ± 0.01) × 109 M ☉. These upper limits, while less stringent than those calculated from a circular binary search in the NANOGrav 12.5 yr data set, are consistent with the SMBHB model of 3C 66B developed from electromagnetic observations
The NANOGrav 12.5 yr Data Set: Search for Gravitational Wave Memory
We present the results of a Bayesian search for gravitational wave (GW) memory in the NANOGrav 12.5 yr data set. We find no convincing evidence for any gravitational wave memory signals in this data set. We find a Bayes factor of 2.8 in favor of a model that includes a memory signal and common spatially uncorrelated red noise (CURN) compared to a model including only a CURN. However, further investigation shows that a disproportionate amount of support for the memory signal comes from three dubious pulsars. Using a more flexible red-noise model in these pulsars reduces the Bayes factor to 1.3. Having found no compelling evidence, we go on to place upper limits on the strain amplitude of GW memory events as a function of sky location and event epoch. These upper limits are computed using a signal model that assumes the existence of a common, spatially uncorrelated red noise in addition to a GW memory signal. The median strain upper limit as a function of sky position is approximately 3.3 × 10−14. We also find that there are some differences in the upper limits as a function of sky position centered around PSR J0613−0200. This suggests that this pulsar has some excess noise that can be confounded with GW memory. Finally, the upper limits as a function of burst epoch continue to improve at later epochs. This improvement is attributable to the continued growth of the pulsar timing array
The NANOGrav 12.5-year data set: A computationally efficient eccentric binary search pipeline and constraints on an eccentric supermassive binary candidate in 3C 66B
The radio galaxy 3C 66B has been hypothesized to host a supermassive black
hole binary (SMBHB) at its center based on electromagnetic observations. Its
apparent 1.05-year period and low redshift () make it an interesting
testbed to search for low-frequency gravitational waves (GWs) using Pulsar
Timing Array (PTA) experiments. This source has been subjected to multiple
searches for continuous GWs from a circular SMBHB, resulting in progressively
more stringent constraints on its GW amplitude and chirp mass. In this paper,
we develop a pipeline for performing Bayesian targeted searches for eccentric
SMBHBs in PTA data sets, and test its efficacy by applying it on simulated data
sets with varying injected signal strengths. We also search for a realistic
eccentric SMBHB source in 3C 66B using the NANOGrav 12.5-year data set
employing PTA signal models containing Earth term-only as well as Earth+Pulsar
term contributions using this pipeline. Due to limitations in our PTA signal
model, we get meaningful results only when the initial eccentricity
and the symmetric mass ratio . We find no evidence for an eccentric
SMBHB signal in our data, and therefore place 95% upper limits on the PTA
signal amplitude of ns for the Earth term-only and
ns for the Earth+Pulsar term searches for . Similar 95%
upper limits on the chirp mass are and
. These upper limits, while less
stringent than those calculated from a circular binary search in the NANOGrav
12.5-year data set, are consistent with the SMBHB model of 3C 66B developed
from electromagnetic observations.Comment: 27 Pages, 10 Figures, 1 Table, Accepted for publication in Ap
The NANOGrav 15-Year Data Set: Detector Characterization and Noise Budget
Pulsar timing arrays (PTAs) are galactic-scale gravitational wave detectors.
Each individual arm, composed of a millisecond pulsar, a radio telescope, and a
kiloparsecs-long path, differs in its properties but, in aggregate, can be used
to extract low-frequency gravitational wave (GW) signals. We present a noise
and sensitivity analysis to accompany the NANOGrav 15-year data release and
associated papers, along with an in-depth introduction to PTA noise models. As
a first step in our analysis, we characterize each individual pulsar data set
with three types of white noise parameters and two red noise parameters. These
parameters, along with the timing model and, particularly, a piecewise-constant
model for the time-variable dispersion measure, determine the sensitivity curve
over the low-frequency GW band we are searching. We tabulate information for
all of the pulsars in this data release and present some representative
sensitivity curves. We then combine the individual pulsar sensitivities using a
signal-to-noise-ratio statistic to calculate the global sensitivity of the PTA
to a stochastic background of GWs, obtaining a minimum noise characteristic
strain of at 5 nHz. A power law-integrated analysis shows
rough agreement with the amplitudes recovered in NANOGrav's 15-year GW
background analysis. While our phenomenological noise model does not model all
known physical effects explicitly, it provides an accurate characterization of
the noise in the data while preserving sensitivity to multiple classes of GW
signals.Comment: 67 pages, 73 figures, 3 tables; published in Astrophysical Journal
Letters as part of Focus on NANOGrav's 15-year Data Set and the Gravitational
Wave Background. For questions or comments, please email
[email protected]
How to Detect an Astrophysical Nanohertz Gravitational-Wave Background
Analysis of pulsar timing data have provided evidence for a stochastic
gravitational wave background in the nHz frequency band. The most plausible
source of such a background is the superposition of signals from millions of
supermassive black hole binaries. The standard statistical techniques used to
search for such a background and assess its significance make several
simplifying assumptions, namely: i) Gaussianity; ii) isotropy; and most often
iii) a power-law spectrum. However, a stochastic background from a finite
collection of binaries does not exactly satisfy any of these assumptions. To
understand the effect of these assumptions, we test standard analysis
techniques on a large collection of realistic simulated datasets. The dataset
length, observing schedule, and noise levels were chosen to emulate the
NANOGrav 15-year dataset. Simulated signals from millions of binaries drawn
from models based on the Illustris cosmological hydrodynamical simulation were
added to the data. We find that the standard statistical methods perform
remarkably well on these simulated datasets, despite their fundamental
assumptions not being strictly met. They are able to achieve a confident
detection of the background. However, even for a fixed set of astrophysical
parameters, different realizations of the universe result in a large variance
in the significance and recovered parameters of the background. We also find
that the presence of loud individual binaries can bias the spectral recovery of
the background if we do not account for them.Comment: 14 pages, 8 figure
The NANOGrav 15-year data set: Search for Transverse Polarization Modes in the Gravitational-Wave Background
Recently we found compelling evidence for a gravitational wave background
with Hellings and Downs (HD) correlations in our 15-year data set. These
correlations describe gravitational waves as predicted by general relativity,
which has two transverse polarization modes. However, more general metric
theories of gravity can have additional polarization modes which produce
different interpulsar correlations. In this work we search the NANOGrav 15-year
data set for evidence of a gravitational wave background with quadrupolar
Hellings and Downs (HD) and Scalar Transverse (ST) correlations. We find that
HD correlations are the best fit to the data, and no significant evidence in
favor of ST correlations. While Bayes factors show strong evidence for a
correlated signal, the data does not strongly prefer either correlation
signature, with Bayes factors when comparing HD to ST correlations,
and for HD plus ST correlations to HD correlations alone. However,
when modeled alongside HD correlations, the amplitude and spectral index
posteriors for ST correlations are uninformative, with the HD process
accounting for the vast majority of the total signal. Using the optimal
statistic, a frequentist technique that focuses on the pulsar-pair
cross-correlations, we find median signal-to-noise-ratios of 5.0 for HD and 4.6
for ST correlations when fit for separately, and median signal-to-noise-ratios
of 3.5 for HD and 3.0 for ST correlations when fit for simultaneously. While
the signal-to-noise-ratios for each of the correlations are comparable, the
estimated amplitude and spectral index for HD are a significantly better fit to
the total signal, in agreement with our Bayesian analysis.Comment: 11 pages, 5 figure