Noise characterization for pulsar-timing applications accounts for
interstellar dispersion by assuming a known frequency-dependence of the delay
it introduces in the times of arrival (TOAs). However, calculations of this
delay suffer from mis-estimations due to other chromatic effects in the
observations. The precision in modeling dispersion is dependent on the observed
bandwidth. In this work, we calculate the offsets in infinite-frequency TOAs
due to mis-estimations in the modeling of dispersion when using varying
bandwidths at the Green Bank Telescope. We use a set of broadband observations
of PSR J1643-1224, a pulsar with an excess of chromatic noise in its timing
residuals. We artificially restricted these observations to a narrowband
frequency range, then used both data sets to calculate residuals with a timing
model that does not include short-scale dispersion variations. By fitting the
resulting residuals to a dispersion model, and comparing the ensuing fitted
parameters, we quantify the dispersion mis-estimations. Moreover, by
calculating the autocovariance function of the parameters we obtained a
characteristic timescale over which the dispersion mis-estimations are
correlated. For PSR J1643-1224, which has one of the highest dispersion
measures (DM) in the NANOGrav pulsar timing array, we find that the
infinite-frequency TOAs suffer from a systematic offset of ~22 microseconds due
to DM mis-estimations, with correlations over ~1 month. For lower-DM pulsars,
the offset is ~7 microseconds. This error quantification can be used to provide
more robust noise modeling in NANOGrav's data, thereby increasing sensitivity
and improving parameter estimation in gravitational wave searches.Comment: 15 pages, 7 figure