Prediction Forecast for Culex tritaeniorhynchus Populations in Korea

AbstractObjectivesJapanese encephalitis is considered as a secondary legal infectious disease in Korea and is transmitted by mosquitoes in the summer season. The purpose of this study was to predict the ratio of Culex tritaeniorhynchus to all the species of mosquitoes present in the study regions.MethodsFrom 1999 to 2012, black light traps were installed in 10 regions in Korea (Busan, Gyeonggi, Gangwon, Chungbuk, Chungnam, Jeonbuk, Jeonnam, Gyeongbuk, Gyeongnam, and Jeju) to capture mosquitoes for identification and classification under a dissecting microscope. The number of mosquitoes captured/week was used to calculate its daily occurrence (mosquitoes/trap/night). To predict the characteristics of the mosquito population, an autoregressive model of order p (AR(p)) was used to execute the out-of-sample prediction and the in-sample estimation after presumption.ResultsCompared with the out-of-sample method, the sample-weighted regression method's case was relatively superior for prediction, and this method predicted a decrease in the frequency of Cx. tritaeniorhynchus for 2013. However, the actual frequency of this species showed an increase in frequency. By contrast, the frequency rate of all the mosquitoes including Cx. tritaeniorhynchus gradually decreased.ConclusionThe number of patients with Japanese encephalitis has been strongly associated with the occurrence and density of vector mosquitoes, and the importance of this infectious disease has been highlighted since 2010. The 2013 prediction indicated an increase after an initial decrease, although the ratio of the two mosquito species decreased. The increase in vector density may be due to changes in temperature and the environment. Thus, continuous prevalence prediction is warranted

A Compact 1:3 Power Divider Incorporating 180° Shifted Path for Polarization Purity Enhanced Base Station Subarray

This paper presents a compact 1:3 power divider and a base station subarray antenna with enhanced polarization purity exhibiting high cross-polarization discrimination (XPD) and high input port isolation. The compact 1:3 power divider incorporating a 180° shifted path is proposed to achieve both polarization purity and the wideband characteristics of the subarray antenna, which is difficult to implement using the conventional dual-feed method in limited areas. Using the proposed power divider, a dual-polarized quadruple Π-probe feed stacked patch antenna array is designed, which achieves a wide bandwidth of over 30% (<−13 dB) from 1.68 GHz to 2.25 GHz. The XPD is increased by approximately 8 dB and 5 dB at 1.71 GHz and 2.11 GHz, respectively, to attain an increase in the isolation bandwidth (<−20 dB) from 14% to 43%. Furthermore, the measurement results of a 4 × 3 antenna array confirm the effectiveness of the proposed design in terms of XPD and isolation while maintaining the bandwidth and beam performance. This study demonstrates a relatively wide bandwidth between patch antennas, despite the use of multiple subarrays. The comparative results also show a relatively better front-to-back ratio and isolation of the proposed design

Temperature-insensitive flexible polymer wavelength filter fabricated on polymer substrates

Temperature-insensitive polymer wavelength filters with silicon nitride gratings were fabricated on a polymer substrate. Polymer waveguides on polymer substrates were fabricated on top of the Si wafer with a water soluble poly(vinylalcohol) (PVA) interlayer between the Si wafer and polymer waveguides. After the completion of the waveguides, the polymer waveguides are separated from the substrate by dissolving the PVA layer to form all polymer waveguides. The novel process provides a way to overcome the problem of the thermal instability of polymer substrate when the polymer waveguides are directly fabricated on polymer substrates. The polymeric wavelength filter fabricated on a polymer substrate exhibits one order of magnitude lower Bragg wavelength shift with temperature than the device on the Si-wafer in the temperature range of 25–70 °C, which is consistent with theoretical prediction.The authors thank the KOSET through CRM for financial support of this work

Natural Language Dataset Generation Framework for Visualizations Powered by Large Language Models

We introduce VL2NL, a Large Language Model (LLM) framework that generates rich and diverse NL datasets using only Vega-Lite specifications as input, thereby streamlining the development of Natural Language Interfaces (NLIs) for data visualization. To synthesize relevant chart semantics accurately and enhance syntactic diversity in each NL dataset, we leverage 1) a guided discovery incorporated into prompting so that LLMs can steer themselves to create faithful NL datasets in a self-directed manner; 2) a score-based paraphrasing to augment NL syntax along with four language axes. We also present a new collection of 1,981 real-world Vega-Lite specifications that have increased diversity and complexity than existing chart collections. When tested on our chart collection, VL2NL extracted chart semantics and generated L1/L2 captions with 89.4% and 76.0% accuracy, respectively. It also demonstrated generating and paraphrasing utterances and questions with greater diversity compared to the benchmarks. Last, we discuss how our NL datasets and framework can be utilized in real-world scenarios. The codes and chart collection are available at https://github.com/hyungkwonko/chart-llm.Comment: 22 pages, 5 figure

Far-Ultraviolet Cooling Features of the Antlia Supernova Remnant

We present far-ultraviolet observations of the Antlia supernova remnant obtained with Far-ultraviolet IMaging Spectrograph (FIMS, also called SPEAR). The strongest lines observed are C IV 1548,1551 and C III 977. The C IV emission of this mixed-morphology supernova remnant shows a clumpy distribution, and the line intensity is nearly constant with radius. The C III 977 line, though too weak to be mapped over the whole remnant, is shown to vary radially. The line intensity peaks at about half the radius, and drops at the edge of the remnant. Both the clumpy distribution of C IV and the rise in the C IV to C III ratio towards the edge suggest that central emission is from evaporating cloudlets rather than thermal conduction in a more uniform, dense medium.Comment: 9 pages, 4 figures, will be published in ApJ December 1, 2007, v670n2 issue. see http://astro.snu.ac.kr/~jhshinn/ms.pd

Polymorphism of a COLIA1 Gene Sp1 Binding Site in Korean Women with Pelvic Organ Prolapse

PURPOSE: To evaluate the possible influence of G-->T substitution at the Sp1-binding site of the COLIA1 gene on the risk of pelvic organ prolapse (POP). MATERIALS AND METHODS: The study group consisted of 15 women with advanced stage POP. Fifteen control subjects with uterine myomas among the postmenopausal women were matched for age and parity. DNA was obtained from peripheral blood leukocytes. The fragments of the first intron of the COLIA1 gene were amplified by real time polymerase chain reaction. The polymorphism was identified using LightCycler Technology with hybridization probes. Sequencing reactions were performed on each template using commercial primer. RESULTS: Two groups had no significant difference in medical history, surgical, and smoking history. The homozygous peaks in two groups were noted at 57 on melting curve analysis. Sequencing reactions confirmed the G/G alleles in the 30 specimens tested. We could not find any polymorphism at the Sp1-binding site in COLIA1 gene with advanced stage POP. Statistical significance was considered to be p < .05. CONCLUSION: The polymorphism of the Sp1-binding site in the COLIA1 gene did not contribute to the development of POP in Korea.ope

Contrast enhancement behavior of hydrogen silsesquioxane in a salty developer

The authors investigated a contrast enhancement behavior of hydrogen silsesquioxane (HSQ) in a salty development system (NaOH/NaCl). Time-resolved analysis of contrast curves and line-grating patterns were carried out to investigate the unique properties of a salty development process. In NaOH developer without salt, the development process was saturated beyond a certain development time. On the other hand, the addition of salt enabled a continuous development, which was not observed in the pure NaOH development. The continuous thinning process enhances the contrast of HSQ in the salty developer, which allows a fast collapsing behavior in HSQ line-grating patterns. During development process, salt seems to have the role of modifying HSQ by breaking network bonds preferentially, leading to a continuous development rate

Robot-assisted posterior retroperitoneoscopic adrenalectomy: single port access

Laparoscopic adrenalectomy has become a gold standard in adrenal gland surgery. More recently, some minimally invasive trials have been conducted on single access surgery on the adrenal gland. In this study, we introduce our first experiences of robot-assisted posterior retroperitoneoscopic adrenalectomy using single-port access and the da Vinci system

Behavior of NiTiNb SMA wires under recovery stress or prestressing

The recovery stress of martensitic shape-memory alloy [SMA] wires can be used to confine concrete, and the confining effectiveness of the SMA wires was previously proved through experimental tests. However, the behavior of SMA wires under recovery stress has not been seriously investigated. Thus, this study conducted a series of tests of NiTiNb martensitic SMA wires under recovery stress with varying degrees of prestrain on the wires and compared the behavior under recovery stress with that under prestressing of the wires. The remaining stress was reduced by the procedure of additional strain loading and unloading. More additional strains reduced more remaining stresses. When the SMA wires were heated up to the transformation temperature under prestress, the stress on the wires increased due to the state transformation. Furthermore, the stress decreased with a decreasing temperature of the wires down to room temperature. The stress of the NiTiNb wires was higher than the prestress, and the developed stress seemed to depend on the composition of the SMAs. When an additional strain was subsequently loaded and unloaded on the prestressed SMA wires, the remaining stress decreased. Finally, the remaining stress becomes zero when loading and unloading a specific large strain