99 research outputs found
Development and Performance of Kyoto's X-ray Astronomical SOI pixel (SOIPIX) sensor
We have been developing monolithic active pixel sensors, known as Kyoto's
X-ray SOIPIXs, based on the CMOS SOI (silicon-on-insulator) technology for
next-generation X-ray astronomy satellites. The event trigger output function
implemented in each pixel offers microsecond time resolution and enables
reduction of the non-X-ray background that dominates the high X-ray energy band
above 5--10 keV. A fully depleted SOI with a thick depletion layer and back
illumination offers wide band coverage of 0.3--40 keV. Here, we report recent
progress in the X-ray SOIPIX development. In this study, we achieved an energy
resolution of 300~eV (FWHM) at 6~keV and a read-out noise of 33~e- (rms) in the
frame readout mode, which allows us to clearly resolve Mn-K and
K. Moreover, we produced a fully depleted layer with a thickness of
. The event-driven readout mode has already been successfully
demonstrated.Comment: 7pages, 12figures, SPIE Astronomical Telescopes and Instrumentation
2014, Montreal, Quebec, Canada. appears as Proc. SPIE 9147, Space Telescopes
and Instrumentation 2014: Ultraviolet to Gamma Ra
Manipulation of charge carrier flow in Bi₄NbO₈Cl nanoplate photocatalyst with metal loading
Separation of photoexcited charge carriers in semiconductors is important for efficient solar energy conversion and yet the control strategies and underlying mechanisms are not fully established. Although layered compounds have been widely studied as photocatalysts, spatial separation between oxidation and reduction reaction sites is a challenging issue due to the parallel flow of photoexcited carriers along the layers. Here we demonstrate orthogonal carrier flow in layered Bi₄NbO₈Cl by depositing a Rh cocatalyst at the edges of nanoplates, resulting in spatial charge separation and significant enhancement of the photocatalytic activity. Combined experimental and theoretical studies revealed that lighter photogenerated electrons, due to a greater in-plane dispersion of the conduction band (vs. valence band), can travel along the plane and are readily trapped by the cocatalyst, whereas the remaining holes hop perpendicular to the plane because of the anisotropic crystal geometry. Our results propose manipulating carrier flow via cocatalyst deposition to achieve desirable carrier dynamics for photocatalytic reactions in layered compounds
Outstanding in vivo mechanical integrity of additively manufactured spinal cages with a novel “honeycomb tree structure” design via guiding bone matrix orientation
BACKGROUND CONTEXT: Therapeutic devices for spinal disorders, such as spinal fusion cages, must be able to facilitate the maintenance and rapid recovery of spinal function. Therefore, it would be advantageous that future spinal fusion cages facilitate rapid recovery of spinal function without secondary surgery to harvest autologous bone. PURPOSE: This study investigated a novel spinal cage configuration that achieves in vivo mechanical integrity as a devise/bone complex by inducing bone that mimicked the sound trabecular bone, hierarchically and anisotropically structured trabeculae strengthened with a preferentially oriented extracellular matrix. STUDY DESIGN/SETTINGS: In vivo animal study. METHODS: A cage possessing an anisotropic through-pore with a grooved substrate, that we termed “honeycomb tree structure,” was designed for guiding bone matrix orientation; it was manufactured using a laser beam powder bed fusion method through an additive manufacturing processes. The newly designed cages were implanted into sheep vertebral bodies for 8 and 16 weeks. An autologous bone was not installed in the newly designed cage. A pull-out test was performed to evaluate the mechanical integrity of the cage/bone interface. Additionally, the preferential orientation of bone matrix consisting of collagen and apatite was determined. RESULTS: The cage/host bone interface strength assessed by the maximum pull-out load for the novel cage without an autologous bone graft (3360±411 N) was significantly higher than that for the conventional cage using autologous bone (903±188 N) after only 8 weeks post-implantation. CONCLUSIONS: These results highlight the potential of this novel cage to achieve functional fusion between the cage and host bone. Our study provides insight into the design of highly functional spinal devices based on the anisotropic nature of bone. CLINICAL SIGNIFICANCE: The sheep spine is similar to the human spine in its stress condition and trabecular bone architecture and is widely recognized as a useful model for the human spine. The present design may be useful as a new spinal device for humans.Ishimoto T., Kobayashi Y., Takahata M., et al. Outstanding in vivo mechanical integrity of additively manufactured spinal cages with a novel “honeycomb tree structure” design via guiding bone matrix orientation. Spine Journal, 22, 10, 1742. https://doi.org/10.1016/j.spinee.2022.05.006
Innovative design of bone quality-targeted intervertebral spacer: accelerated functional fusion guiding oriented collagen and apatite microstructure without autologous bone graft
BACKGROUND CONTEXT: Although autologous bone grafting is widely considered as an ideal source for interbody fusion, it still carries a risk of nonunion. The influence of the intervertebral device should not be overlooked. Requirements for artificial spinal devices are to join the vertebrae together and recover the original function of the spine rapidly. Ordered mineralization of apatite crystals on collagen accelerates bone functionalization during the healing process. Particularly, the stable spinal function requires the ingrowth of an ordered collagen and apatite matrix which mimics the intact intervertebral microstructure. This collagen and apatite ordering is imperative for functional bone regeneration, which has not been achieved using classical autologous grafting. PURPOSE: We developed an intervertebral body device to achieve high stability between the host bone and synthesized bone by controlling the ordered collagen and apatite microstructure. STUDY DESIGN: This was an in vivo animal study. METHODS: Intervertebral spacers with a through-pore grooved surface structure, referred to as a honeycomb tree structure, were produced using metal 3D printing. These spacers were implanted into normal sheep at the L2–L3 or L4–L5 disc levels. As a control group, grafting autologous bone was embedded. The mechanical integrity of the spacer/bone interface was evaluated through push-out tests. RESULTS: The spacer with honeycomb tree structure induced anisotropic trabecular bone growth with textured collagen and apatite orientation in the through-pore and groove directions. The push-out load of the spacer was significantly higher than that of the conventional autologous graft spacer. Moreover, the load was significantly correlated with the anisotropic texture of the newly formed bone matrix. CONCLUSIONS: The developed intervertebral spacer guided the regenerated bone matrix orientation of collagen and apatite, resulting in greater strength at the spacer/host bone interface than that obtained using a conventional gold-standard autologous bone graft. CLINICAL SIGNIFICANCE: Our results provide a foundation for designing future spacers for interbody fusion in human.Matsugaki A., Ito M., Kobayashi Y., et al. Innovative design of bone quality-targeted intervertebral spacer: accelerated functional fusion guiding oriented collagen and apatite microstructure without autologous bone graft. Spine Journal 23, 609 (2023); https://doi.org/10.1016/j.spinee.2022.12.011
A Novel Diagnostic Method for Thyroid Follicular Tumors Based on Immunofluorescence Analysis of p53-Binding Protein 1 Expression: Detection of Genomic Instability
The preoperative diagnosis of thyroid follicular carcinomas (FCs) by fine-needle aspiration cytology is almost impossible. It was previously demonstrated that p53-binding protein 1 (53BP1) expression, based on immunofluorescence (IF),can serve as a valuable biomarker to estimate the malignant potential of various cancers. 53BP1 belongs to a class of DNA damage response molecules that rapidly localize to the site of DNA double-strand breaks,forming nuclear foci (NF). This study aimed to elucidate the utility of 53BP1 NF expression as a biomarker to differentiate follicular tumors (FTs). Methods: Associations between 53BP1 expression based on IF and histological types of FTs were analyzed using 27 follicular adenomas (FAs), 28 minimally invasive FCs, and 14 widely invasive FCs. Furthermore, the study clarified the relationship between 53BP1 NF and copy number aberrations (CNAs) based on array comparative genomic hybridization, a hallmark of genomic instability (GIN). Results: This study demonstrates differences in 53BP1 NF expression between FA and FC. The incidence of 53BP1 at NF significantly increased with FT progression in the following order: normal follicle < FA < minimally invasive FCs< widely invasive FCs. In contrast, no significant differences were observed in CNAs among the FT samples. Furthermore, there was no significant correlation between CNAs and 53BP1 at NF in FTs. Thus, based on a comparison of these two indicators of GIN, 53BP1 NF (by IF) was better able to estimate the malignancy of FTs compared to CNA (by array comparative genomic hybridization). Interestingly, IF revealed a heterogenous distribution of 53BP1 NF,which occurred more frequently in the invasive or subcapsular area than in the center of the tumor, suggesting intratumoral heterogeneity of GIN in FTs. Conclusions: It is proposed that IF analysis of 53BP1 expression could be a novel diagnostic method to estimate the malignant potential of FTs. Because 53BP1 NF reflect DNA double-strand breaks, it is hypothesized that the incidence of 53BP1 at NF can represent the level of GIN in tumor cells. IF analysis of 53BP1 expression will not only be an auxiliary histologic technique to diagnose FTs accurately, but also a novel technique for preoperative diagnosis using fine-needle aspiration cytology
Investigations of the radial propagation of blob-like structure in a non-confined electron cyclotron resonance heated plasma on Q-shu University Experiment with a Steady-State Spherical Tokamak
A study of radial propagation and electric fields induced by charge separation in blob-like structures has been performed in a non-confined cylindrical electron cyclotron resonance heating plasma on Q-shu University Experiment with a Steady-State Spherical Tokamak using a fast-speed camera and a Langmuir probe. The radial propagation of the blob-like structures is found to be driven by E × B drift. Moreover, these blob-like structures were found to have been accelerated, and the property of the measured radial velocities agrees with the previously proposed model [C. Theiler et al., Phys. Rev. Lett. 103, 065001 (2009)]. Although the dependence of the radial velocity on the connection length of the magnetic field appeared to be different, a plausible explanation based on enhanced short-circuiting of the current path can be proposed
- …