8,206 research outputs found
Development of a multistage laser frequency stabilization for an interferometric gravitational-wave detector
Laser frequency stabilization is essential for interferometric gravitational-wave detectors to attain their target sensitivity. We have designed a multistage laser frequency stabilization system which has been applied in the development of the TAMA 300 gravitational-wave detector in Japan. The control topology consisting of two cascaded loops were employed to secure high feedback gain and reliable detector operation and thus allow the best frequency stability and uninterrupted long-term observation. We achieved simultaneously a frequency stability of 5 × 10^(−5) Hz/√HZ , and a common-mode rejection ratio (which reduces the coupling of frequency noise to spurious signals in the detector) of 37 dB. The developed system enabled us to operate TAMA 300 with sufficient sensitivity and stability that it had the potential to register gravitational-wave events. The system was confirmed to be suitable for a gravitational-wave detector from the observation run of TAMA 300
On UHECR energy estimation algorithms based on the measurement of electromagnetic component parameters in EAS
Model calculations are performed of extensive air shower (EAS) component
energies using a variety of hadronic interaction parameters. A conversion
factor from electromagnetic component energy to the energy of ultra-high energy
cosmic rays (UHECRs) and its model and primary mass dependence is studied. It
is shown that model dependence of the factor minimizes under the necessary
condition of the same maximum position and muon content of simulated showers.Comment: contracted version is accepted for publication in Doklady Physic
Buffer gas induced collision shift for the Sr clock transition
Precision saturation spectroscopy of the is
performed in a vapor cell filled with various rare gas including He, Ne, Ar,
and Xe. By continuously calibrating the absolute frequency of the probe laser,
buffer gas induced collision shifts of kHz are detected with gas
pressure of 1-20 mTorr. Helium gave the largest fractional shift of . Comparing with a simple impact calculation and a
Doppler-limited experiment of Holtgrave and Wolf [Phys. Rev. A {\bf 72}, 012711
(2005)], our results show larger broadening and smaller shifting coefficient,
indicating effective atomic loss due to velocity changing collisions. The
applicability of the result to the optical lattice clock
transition is also discussed
Genetic analysis of tolerance to rice tungro bacilliform virus in rice (Oryza sativa L.) through agroinoculation
Balimau Putih [an Indonesian cultivar tolerant to rice tungro bacilliform virus (RTBV)] was crossed with IR64 (RTBV, susceptible variety) to produce the three filial generations F1, F2 and F3. Agroinoculation was used to introduce RTBV into the test plants. RTBV tolerance was based on the RTBV level in plants by analysis of coat protein using enzyme-linked immunosorbent assay. The level of RTBV in cv. Balimau Putih was significantly lower than that of IR64 and the susceptible control, Taichung Native 1. Mean RTBV levels of the F1, F2 and F3 populations were comparable with one another and with the average of the parents. Results indicate that there was no dominance and an additive gene action may control the expression of tolerance to RTBV. Tolerance based on the level of RTBV coat protein was highly heritable (0.67) as estimated using the mean values of F3 lines, suggesting that selection for tolerance to RTBV can be performed in the early selfing generations using the technique employed in this study. The RTBV level had a negative correlation with plant height, but positive relationship with disease index valu
Contribution of non-extensor muscles of the leg to maximal-effort countermovement jumping
BACKGROUND: The purpose of this study was to determine the effects of non-extensor muscles of the leg (i.e., muscles whose primary function is not leg extension) on the kinematics and kinetics of human maximal-effort countermovement jumping. Although it is difficult to address this type of question through experimental procedures, the methodology of computer simulation can be a powerful tool. METHODS: A skeletal model that has nine rigid body segments and twenty degrees of freedom was developed. Two sets of muscle models were attached to this skeletal model: all (most of) major muscles in the leg ("All Muscles" model) and major extensor muscles in the leg (i.e., muscles whose primary function is leg extension; "Extensors Only" model). Neural activation input signal was represented by a series of step functions with a step duration of 0.05 s. Simulations were started from an identical upright standing posture. The optimal pattern of the activation input signal was searched through extensive random-search numerical optimization with a goal of maximizing the height reached by the mass centre of the body after jumping up. RESULTS: The simulated kinematics was almost two-dimensional, suggesting the validity of two-dimensional analyses when evaluating net mechanical outputs around the joints using inverse dynamics. A greater jumping height was obtained for the "All Muscles" model (0.386 m) than for the "Extensors Only" model (0.301 m). For the "All Muscles" model, flexor muscles developed force in the beginning of the countermovement. For the "All Muscles" model, the sum of the work outputs from non-extensor muscles was 47.0 J, which was 13% of the total amount (359.9 J). The quantitative distribution of the work outputs from individual muscles was markedly different between these two models. CONCLUSION: It was suggested that the contribution of non-extensor muscles in maximal-effort countermovement jumping is substantial. The use of a computer simulation model that includes non-extensor muscles seems to be more desirable for the assessment of muscular outputs during jumping
Experimental analysis of vacuum pressure and gas flow rate in structured-core transparent vacuum insulation panels
The notion that modern buildings should strive to be net-zero energy buildings (NZEBs) is widely accepted. One of the causes leading to high energy usage for space heating, resulting in avoidable carbon emissions, is heat loss via building windows. In order to improve window’s insulation in existing buildings, structured-core transparent vacuum insulation panels (TVIPs) are proposed. TVIPs mainly consist of the structured core material, the low-emissivity film, and the transparent gas barrier envelope. TVIPs have high insulation performance and are inexpensive to manufacture and can be easily installed. Therefore, TVIPs have the potential to improve window’s insulation in existing buildings at a low cost. However, it is necessary to overcome the issue of preventing the pressure rise inside TVIP after vacuum sealing. The authors constructed an experimental setup to quantify the effect of reduction of gas flow rate in TVIP after evacuation by applying the pressure-rate-of-rise-method. In this experiment, a gas barrier film with a straw was used as the vacuum chamber. This could reproduce the pressure increase in the TVIP after sealing and the gas flow rate in the TVIP is evaluated. The experimental result shows that the coated core material and the enclosing getter agent lowered the pressure rise and gas flow rate in TVIP by combining concurrent evacuation and heating. Furthermore, after extending the simultaneous vacuuming and heating period to 8 h and applying the coated core material, and enclosing the getter agent, the internal pressure in TVIP may be lowered to around 1 Pa after 30 min after halting vacuuming. It was confirmed that this pressure satisfied the performance required for TVIPs, and the result was much closer to the realization of TVIPs
Thermal performance analysis of a new structured-core translucent vacuuminsulation panel in comparison to vacuum glazing: Experimental and theoretically validated analyses
The notion at which, nowadays, building sector is being recognized to be nearly zero-energy buildings (NZEBs) relies partly on the thermal performance of its fabric insulation. Vacuum glazing (VG) technology attracted the research interest as an option to reduce heat loss through windows. However, the total glazing thermal transmittance (U-value) for VG increases with the use of smaller glazing area due to the edge-seal effects, due to the thermal short-circuit around the edges and the overall construction cost of VG leading to an unaffordable option to deal with energy conservation of buildings. Therefore, this study aims to propose a new structured core transparent vacuum insulation panel (TVIP) to accomplish insulation for the windows without edge sealing effect, with lower cost and can be easily retrofitted to the conventional windows of the existing buildings. To do this, VG and TVIP were constructed and their thermal conductivity were measured using heat flow meter apparatus.
In addition, a 3D finite volume model considering the effect of surface to surface radiation, gas conduction, and thermal bridges through the spacer material and sealing material is developed. The model is validated
with the experiments in this work and with the data for VG in the literature. The effect of vacuum pressure increase is simulated to mimic the vacuum deterioration problem and the effect of glazing size on the
insulation performance of both VG and TVIP were investigated. The results indicate that for a smaller glazing area of less than 30 cm × 30 cm, the TVIP accomplished lower U-value compared with the VG at vacuum
pressure of 0.1 Pa and 1 Pa. While, at a vacuum pressure of 10 Pa, the TVIP attained a lower U-value over the entire range of the investigated glazing sizes. Further, the edge-seal effect in the VG is diminished with the use of TVIP. Furthermore, the material cost per unit area of the TVIP is three times less than the cost of VG at laboratory scale. The results of the current study can guide vacuum window designers and researchers to further enhance the performance of TVIP based window to compete for the VG in the markets
Doubly degenerate orbital system in honeycomb lattice: Implication of orbital state in layered iron oxide
- …