Acute effects of difference in glucose intake on arterial stiffness in healthy subjects

Background: Post-prandial hyperglycemia is associated with higher cardiovascular risk, which causes arterial stiffening and impaired function. Although post-prandial increases in blood glucose are proportional to the level of intake, the acute effects of different glucose intakes on arterial stiffness have not been fully characterized. The present study aimed to determine the acute effects of differences in glucose intake on arterial stiffness. Methods: Six healthy middle-aged and elderly individuals (mean age, 60.0 ± 12.1 years) were orally administered 15, 20, and 25 g of glucose on separate days in a randomized, controlled, cross-over fashion. Brachial-ankle pulse wave velocity, heart-brachial pulse wave velocity, cardio-ankle vascular index, brachial and ankle blood pressure, heart rate, and blood glucose and serum insulin concentrations before and 30, 60, and 90 min after glucose ingestion were measured. Results: Compared to baseline, brachial-ankle pulse wave velocity was higher at 30, 60 and 90 min after ingestion of 25 g glucose, and higher at 90 min after ingestion of 20 g glucose, but at no time points after ingestion of 15 g. Cardio-ankle vascular index was higher at 60 min than at baseline after ingestion of 25 g glucose, but not after ingestion of 15 or 20 g. Conclusions: These results suggest that brachial-ankle pulse wave velocity and cardio-ankle vascular index is affected by the quantity of glucose ingested. Proposed presently is that glucose intake should be reduced at each meal to avoid increases in brachial-ankle pulse wave velocity and cardio-ankle vascular index during acute hyperglycemia

Effects of Fe fertilizer eluate on the growth of Sargassum horneri at the germling and immature stages

To aid in the restoration of coastal barren ground areas, it is important to clarify the effects of chelated iron on the growth of seaweed. In particular, for the further development of practical methods to promote seaweed growth, Fe-binding organic ligands, such as humic substances (HSs) composed of humus materials, rather than Fe-binding inorganic ligands, such as ethylenediaminetetraacetic acid (EDTA), should be investigated. In this study, the effects of an Fe fertilizer, made from HSs and steelmaking slag, on the growth of the brown alga Sargassum horneri at the germling and immature stages were examined. The addition of the Fe fertilizer eluate containing Fe organic ligand complexes clearly promoted the growth of S. horneri at the germling and immature stages. It was also clear that the effect of Fe concentration in the Fe fertilizer eluate on the growth rate was almost the same as that of Fe–EDTA. Moreover, the addition of the Fe fertilizer eluate had a great effect on the brown color of S. horneri thalli and promoted the increased content of photosynthetic pigments, such as chlorophyll a. Based on these experimental results, the application of the Fe fertilizer containing Fe organic ligand complexes is expected to become an effective method for the restoration of the barren ground phenomenon in Fe-deficient coastal areas. © 2015 Springer Science+Business Media DordrechtEmbargo Period 12 month

Cellular function of osteocytes in normal and αklotho-deficient mice

During the last decade, osteocyte-derived factors i.e., sclerostin, dentin matrix protein-1, fibroblast growth factor 23 (FGF23) that reduces serum phosphate concentration by mediating FGF receptor 1c/αklotho in the kidney, have been highlighted for osteocytes’ fine-turned regulation on bone remodeling and phosphate homeostasis. Osteocytes are interconnected through gap junctions between their cytoplasmic processes, and thereby, build upon the functional syncytia, referred to as the osteocytic lacunar-canalicular system (OLCS). Osteocytes appear to communicate surrounding osteocytes and osteoblasts by means of two possible pathways of molecular transport throughout the OLCS : One is a passageway of their cytoplasmic processes, and the other is a pericellular space in the osteocytic canaliculi. The regularly-oriented OLCS in mature compact bone appears to efficiently serve for molecular transport, mechanosensing and targeted bone remodeling that would erase microdamages in bone. In a disrupted signaling state of FGF23/αklotho, serum concentration of phosphate would be markedly-elevated. Despite highly-elevated serum phosphate, αklotho -deficient mice revealed defective mineralization in bone matrix. OLCS in αklotho -deficient mice were irregularly-distributed and the connectivity of cytoplasmic processes of osteocytes was very poor, so that osteocytes did not seem to form functional syncytia. Therefore, osteocytes’function cooperated with other bone cells, rather than serum concentration of calcium/phosphate, and this seems to play a central role in maintaining bone mineralization. In this review, the biological function of the regularly-arranged OLCS in a normal state will be introduced, as well as dysfunctional osteocytes in αklotho-deficient state, using animal models

Characteristics of Vertical Transistors on a GaN Substrate Fabricated via Na-Flux Method and Enlargement of the Substrate Surpassing 6 Inches

Imanishi M., Usami S., Murakami K., et al. Characteristics of Vertical Transistors on a GaN Substrate Fabricated via Na-Flux Method and Enlargement of the Substrate Surpassing 6 Inches. Physica Status Solidi - Rapid Research Letters, (2024); https://doi.org/10.1002/pssr.202400106.The Na-flux method is expected to be a key GaN growth technique for obtaining ideal bulk GaN crystals. Herein, the structural quality of the latest GaN crystals grown using the Na-flux method and, for the first time, the characteristics of a vertical transistor fabricated on a GaN substrate grown using this method are discussed. Vertical transistors exhibit normally off operation with a gate voltage threshold exceeding 2 V and a maximum drain current of 3.3 A during the on-state operation. Additionally, it demonstrates a breakdown voltage exceeding 600 V and a low leakage current during off-state operation. It is also described that the variation in the on-resistance can be minimized using GaN substrates with minimal off-angle variations. This is crucial for achieving the large-current chips required for future demonstration of actual devices. In addition, the reverse I–V characteristics of the parasitic p–n junction diode (PND) structures indicate a reduction in the number of devices with a significant leakage current compared to commercially available GaN substrates. Finally, a circular GaN substrate with a diameter of 161 mm, surpassing 6 inches, grown using the Na-flux method is demonstrated, making it the largest GaN substrate aside from those produced through the tiling technique

A High-Speed Congenic Strategy Using First-Wave Male Germ Cells

BACKGROUND: In laboratory mice and rats, congenic breeding is essential for analyzing the genes of interest on specific genetic backgrounds and for analyzing quantitative trait loci. However, in theory it takes about 3-4 years to achieve a strain carrying about 99% of the recipient genome at the tenth backcrossing (N10). Even with marker-assisted selection, the so-called 'speed congenic strategy', it takes more than a year at N4 or N5. METHODOLOGY/PRINCIPAL FINDINGS: Here we describe a new high-speed congenic system using round spermatids retrieved from immature males (22-25 days of age). We applied the technique to three genetically modified strains of mice: transgenic (TG), knockin (KI) and N-ethyl-N-nitrosourea (ENU)-induced mutants. The donor mice had mixed genetic backgrounds of C57BL/6 (B6):DBA/2 or B6:129 strains. At each generation, males used for backcrossing were selected based on polymorphic marker analysis and their round spermatids were injected into B6 strain oocytes. Backcrossing was repeated until N4 or N5. For the TG and ENU-mutant strains, the N5 generation was achieved on days 188 and 190 and the proportion of B6-homozygous loci was 100% (74 markers) and 97.7% (172/176 markers), respectively. For the KI strain, N4 was achieved on day 151, all the 86 markers being B6-homozygous as early as on day 106 at N3. The carrier males at the final generation were all fertile and propagated the modified genes. Thus, three congenic strains were established through rapid generation turnover between 41 and 44 days. CONCLUSIONS/SIGNIFICANCE: This new high-speed breeding strategy enables us to produce congenic strains within about half a year. It should provide the fastest protocol for precise definition of the phenotypic effects of genes of interest on desired genetic backgrounds

A pigmented calcifying cystic odontogenic tumor associated with compound odontoma: a case report and review of literature

<p>Abstract</p> <p>Background</p> <p>Pigmented intraosseous odontogenic lesions are rare with only 47 reported cases in the English literature. Among them, pigmented calcifying cystic odontogenic tumor, formerly known as calcifying odontogenic cyst, is the most common lesion with 20 reported cases.</p> <p>Methods</p> <p>A case of pigmented calcifying cystic odontogenic tumor associated with odontoma occurring at the mandibular canine-premolar region of a young Japanese boy is presented with radiographic, and histological findings. Special staining, electron microscopic study and immunohistochemical staining were also done to characterize the pigmentation.</p> <p>Results</p> <p>The pigments in the lesion were confirmed to be melanin by Masson-Fontana staining and by transmission electron microscopy. The presence of dendritic melanocytes within the lesion was also demonstrated by S-100 immunostaining.</p> <p>Conclusion</p> <p>The present case report of pigmented calcifying cystic odontogenic tumor associated with odontoma features a comprehensive study on melanin and melanocytes, including histochemical, immunohistochemical and transmission electron microscopic findings.</p

Occupational risk factors for Parkinson's disease: a case-control study in Japan

<p>Abstract</p> <p>Background</p> <p>The evidence for associations between occupational factors and the risk of Parkinson's disease (PD) is inconsistent. We assessed the risk of PD associated with various occupational factors in Japan.</p> <p>Methods</p> <p>We examined 249 cases within 6 years of onset of PD. Control subjects were 369 inpatients and outpatients without neurodegenerative disease. Information on occupational factors was obtained from a self-administered questionnaire. Relative risks of PD were estimated using odds ratios (ORs) and 95% confidence intervals (CIs) based on logistic regression. Adjustments were made for gender, age, region of residence, educational level, and pack-years of smoking.</p> <p>Results</p> <p>Working in a professional or technical occupation tended to be inversely related to the risk of PD: adjusted OR was 0.59 (95% CI: 0.32-1.06, <it>P </it>= 0.08). According to a stratified analysis by gender, the decreased risk of PD for persons in professional or technical occupations was statistically significant only for men. Adjusted ORs for a professional or technical occupation among men and women were 0.22 (95% CI: 0.06-0.67) and 0.99 (0.47-2.07), respectively, and significant interaction was observed (<it>P </it>= 0.048 for homogeneity of OR). In contrast, risk estimates for protective service occupations and transport or communications were increased, although the results were not statistically significant: adjusted ORs were 2.73 (95% CI: 0.56-14.86) and 1.74 (95% CI: 0.65-4.74), respectively. No statistical significance was seen in data concerning exposure to occupational agents and the risk of PD, although roughly a 2-fold increase in OR was observed for workers exposed to stone or sand.</p> <p>Conclusion</p> <p>The results of our study suggest that occupational factors do not play a substantial etiologic role in this population. However, among men, professional or technical occupations may decrease the risk of PD.</p