Petiolate wings: effects on the leading-edge vortex in flapping flight

The wings of many insect species including crane flies and damselflies are petiolate (on stalks), with the wing planform beginning some distance away from the wing hinge, rather than at the hinge. The aerodynamic impact of flapping petiolate wings is relatively unknown, particularly on the formation of the lift-augmenting leading-edge vortex (LEV): a key flow structure exploited by many insects, birds and bats to enhance their lift coefficient. We investigated the aerodynamic implications of petiolation P using particle image velocimetry flow field measurements on an array of rectangular wings of aspect ratio 3 and petiolation values of P = 1–3. The wings were driven using a mechanical device, the ‘Flapperatus’, to produce highly repeatable insect-like kinematics. The wings maintained a constant Reynolds number of 1400 and dimensionless stroke amplitude Λ* (number of chords traversed by the wingtip) of 6.5 across all test cases. Our results showed that for more petiolate wings the LEV is generally larger, stronger in circulation, and covers a greater area of the wing surface, particularly at the mid-span and inboard locations early in the wing stroke cycle. In each case, the LEV was initially arch-like in form with its outboard end terminating in a focus-sink on the wing surface, before transitioning to become continuous with the tip vortex thereafter. In the second half of the wing stroke, more petiolate wings exhibit a more detached LEV, with detachment initiating at approximately 70% and 50% span for P = 1 and 3, respectively. As a consequence, lift coefficients based on the LEV are higher in the first half of the wing stroke for petiolate wings, but more comparable in the second half. Time-averaged LEV lift coefficients show a general rise with petiolation over the range tested.This work was supported by an EPSRC Career Acceleration Fellowship to R.J.B. (EP/H004025/1)

The effect of aspect ratio on the leading-edge vortex over an insect-like flapping wing

Insect wing shapes are diverse and a renowned source of inspiration for the new generation of autonomous flapping vehicles, yet the aerodynamic consequences of varying geometry is not well understood. One of the most defining and aerodynamically significant measures of wing shape is the aspect ratio, defined as the ratio of wing length (R) to mean wing chord ($\bar{c}$). We investigated the impact of aspect ratio, AR, on the induced flow field around a flapping wing using a robotic device. Rigid rectangular wings ranging from AR = 1.5 to 7.5 were flapped with insect-like kinematics in air with a constant Reynolds number (Re) of 1400, and a dimensionless stroke amplitude of $6.5\bar{c}$ (number of chords traversed by the wingtip). Pseudo-volumetric, ensemble-averaged, flow fields around the wings were captured using particle image velocimetry at 11 instances throughout simulated downstrokes. Results confirmed the presence of a high-lift, separated flow field with a leading-edge vortex (LEV), and revealed that the conical, primary LEV grows in size and strength with increasing AR. In each case, the LEV had an arch-shaped axis with its outboard end originating from a focus-sink singularity on the wing surface near the tip. LEV detachment was observed for $\mathrm{AR}\gt 1.5$ around mid-stroke at $\sim 70\%$ span, and initiated sooner over higher aspect ratio wings. At $\mathrm{AR}\gt 3$ the larger, stronger vortex persisted under the wing surface well into the next half-stroke leading to a reduction in lift. Circulatory lift attributable to the LEV increased with AR up to AR = 6. Higher aspect ratios generated proportionally less lift distally because of LEV breakdown, and also less lift closer to the wing root due to the previous LEV's continuing presence under the wing. In nature, insect wings go no higher than $\mathrm{AR}\sim 5,$ likely in part due to architectural and physiological constraints but also because of the reducing aerodynamic benefits of high AR wings

Measuring antibiotic availability and use in 20 low- and middle-income countries

Objective To assess antibiotic availability and use in health facilities in low- and middle-income countries, using the service provision assessment and service availability and readiness assessment surveys. Methods We obtained data on antibiotic availability at 13 561 health facilities in 13 service provision assessment and 8 service availability and readiness assessment surveys. In 10 service provision assessment surveys, child consultations with health-care providers were observed, giving data on antibiotic use in 22 699 children. Antibiotics were classified as access, watch or reserve, according to the World Health Organization’s AWaRe categories. The percentage of health-care facilities across countries with specific antibiotics available and the proportion of children receiving antibiotics for key clinical syndromes were estimated. Findings The surveys assessed the availability of 27 antibiotics (19 access, 7 watch, 1 unclassified). Co-trimoxazole and metronidazole were most widely available, being in stock at 89.5% (interquartile range, IQR: 11.6%) and 87.1% (IQR: 15.9%) of health facilities, respectively. In contrast, 17 other access and watch antibiotics were stocked, by fewer than a median of 50% of facilities. Of the 22 699 children observed, 60.1% (13 638) were prescribed antibiotics (mostly co-trimoxazole or amoxicillin). Children with respiratory conditions were most often prescribed antibiotics (76.1%; 8972/11 796) followed by undifferentiated fever (50.1%; 760/1518), diarrhoea (45.7%; 1293/2832) and malaria (30.3%; 352/1160). Conclusion Routine health facility surveys provided a valuable data source on the availability and use of antibiotics in low- and middle-income countries. Many access antibiotics were unavailable in a majority of most health-care facilities

Benchmark full configuration-interaction calculations on HF and NH2

Full configuration-interaction (FCI) calculations are performed at selected geometries for the 1-sigma(+) state of HF and the 2-B(1) and 2-A(1) states of NH2 using both DZ and DZP gaussian basis sets. Higher excitations become more important when the bonds are stretched and the self-consistent field (SCF) reference becomes a poorer zeroth-order description of the wave function. The complete active space SCF - multireference configuration-interaction (CASSCF-MRCI) procedure gives excellent agreement with the FCI potentials, especially when corrected with a multi-reference analog of the Davidson correction

VLBI observations of the Crab nebula pulsar

Observations were made at meter wave-lengths using very long base-line interferometry techniques. At 196.5 MHz no resolution of the pulsar are observed; all the pulse shapes observed with the interferometers are similar to single dish profiles, and all the power pulsates. At 111.5 MHz besides the pulsing power there is always a steady component, presumably due to interstellar scattering. The pulsar is slightly resolved at 111.5 MHz with an apparent angular diameter of 0.07 sec ? 0.01 sec. A 50 percent linear polarization of the time-averaged power is noted at 196.5 MHz; at 111.5 MHz, 20 percent of the total time-averaged power is polarized, 35 percent of the pulsing power is polarized, and the steady component is unpolarized

Characteristics of long-duration inhibitory postsynaptic potentials in rat neocortical neurons in vitro

1. The characteristics of long-duration inhibitory postsynaptic potentials (l-IPSPs) which are evoked in rat frontal neocortical neurons by local electrical stimulation were investigated with intracellular recordings from anin vitro slice preparation. 2. Stimulation with suprathreshold intensities evoked l-IPSPs with typical durations of 600–900 msec at resting membrane potential. Conductance increases of 15–60% were measured at the peak amplitude of l-IPSPs (150–250 msec poststimulus). 3. The duration of the conductance increases during l-IPSPs displayed a significant voltage dependence, decreasing as the membrance potential was depolarized and increasing with hyperpolarization. 4. The reversal potential of l-IPSPs is significantly altered by reductions in the extracellular potassium concentration. Therefore it is concluded that l-IPSPs in rat neocortical neurons are generated by the activation of a potassium conductance. 5. l-IPSPs exhibit stimulation fatigue. Stimulation with a frequency of 1 Hz produces a complete fatigue of the conductance increases during l-IPSPs after approximately 20 consecutive stimuli. Recovery from this fatigue requires minutes. 6. l-IPSPs are not blocked by bicuculline but are blocked by baclofen

Cell morphology as a design parameter in the bioengineering of cell-biomaterial surface interactions

Control of cell–surface interaction is necessary for biomaterial applications such as cell sheets, intelligent cell culture surfaces, or functional coatings. In this paper, we propose the emergent property of cell morphology as a design parameter in the bioengineering of cell–biomaterial surface interactions. Cell morphology measured through various parameters can indicate ideal candidates for these various applications thus reducing the time taken for the screening and development process. The hypothesis of this study is that there is an optimal cell morphology range for enhanced cell proliferation and migration on the surface of biomaterials. To test the hypothesis, primary porcine dermal fibroblasts (PDF, 3 biological replicates) were cultured on ten different surfaces comprising components of the natural extracellular matrix of tissues. Results suggested an optimal morphology with a cell aspect ratio (CAR) between 0.2 and 0.4 for both increased cell proliferation and migration. If the CAR was below 0.2 (very elongated cell), cell proliferation was increased whilst migration was reduced. A CAR of 0.4+ (rounded cell) favoured cell migration over proliferation. The screening process, when it comes to biomaterials is a long, repetitive, arduous but necessary event. This study highlights the beneficial use of testing the cell morphology on prospective prototypes, eliminating those that do not support an optimal cell shape. We believe that the research presented in this paper is important as we can help address this screening inefficiency through the use of the emergent property of cell morphology. Future work involves automating CAR quantification for high throughput screening of prototypes