Shock propagation in locally driven granular systems

We study shock propagation in a system of initially stationary hard-spheres that is driven by a continuous injection of particles at the origin. The disturbance created by the injection of energy spreads radially outwards through collision between particles. Using scaling arguments, we determine the exponent characterizing the power law growth of this disturbance in all dimensions. The scaling functions describing the various physical quantities are determined using large scale event driven simulations in two and three dimensions for both the elastic and the inelastic system. The results are shown to describe well the data from two different experiments on granular systems that are similarly driven.Comment: 8 pages, 9 figure

Analysis of the electromagnetic scattering from an inlet geometry with lossy walls

One of the primary goals is to develop an approximate but sufficiently accurate analysis for the problem of electromagnetic (EM) plane wave scattering by an open ended, perfectly-conducting, semi-infinite hollow circular waveguide (or duct) with a thin, uniform layer of lossy or absorbing material on its inner wall, and with a simple termination inside. The less difficult but useful problem of the EM scattering by a two-dimensional (2-D), semi-infinite parallel plate waveguide with an impedance boundary condition on the inner walls was chosen initially for analysis. The impedance boundary condition in this problem serves to model a thin layer of lossy dielectric/ferrite coating on the otherwise perfectly-conducting interior waveguide walls. An approximate but efficient and accurate ray solution was obtained recently. That solution is presently being extended to the case of a moderately thick dielectric/ferrite coating on the walls so as to be valid for situations where the impedance boundary condition may not remain sufficiently accurate

Physical method of upgradation for low grade wolframite pre-concentrate from Degana, Rajasthan

Tungsten is a strategic metal and mostly used in defence. It is also used in cutting tools, industrial, electrical, textile and leather sectors. India's tungsten reserves are very limited and the only workable deposit is restricted to Degana in Rajasthan. Tungsten deposit occurs in association with metamorphic rocks and granite igneous rock throughout the world. At Degana, two types of deposit are being worked at, one being quartz load wherein wolframite is mineralised in quartz vein and the other is finely disseminated tungsten mineralisation in the granite body. The sample under investigation belonged to off-grade tungsten pre-concentrate - I (PC - 1) produced at Degana Plant site, assaying 14.50% WOe 20.20% SiO, and 4.13% S. The objective of this study was to find the upgradation conforming to DMRL specification i.e. final wolframite concentrate with >65.0% WO,, and S and SiO, < 1.0% each. Detailed studies indicated that grinding the feed to 200 mesh followed by sulphide flotation at 4.5 and 8.0 pH and repeated vanning of non-sulphide could produce a wanner concen¬trate assaying 64.8% WO,. 1.0% SiO, and 3.0% S with a distribution of 48.8% WO3 in it. Thorough desliming followed by sulphide flotation and then treating on vanner times could produce a concentrate analysing 68.47% WO j, 0.5% SiO3 and 0.48% S which conforms to the DMRL sped¬fications

Evaluation of Grass Bales Stored under Cover and Plinth System of Storage

The feed and fodder requirement for dairy animals is primarily met by roughages, green fodder and homemade concentrate mixtures. Roughages are high in crude fibrous material which essentially consists of cellulose, hemi-cellulose and to some extent lignin. Livestock production is backbone of Indian Agriculture and source of employment in rural areas for centuries. To meet the demand of feeding these huge livestock population an adequate supply of feed throughout the year is the prerequisite for successful animal production programmes. A huge gap between demand and supply of feed and fodder exists in our country. This huge gap between requirement and availability of livestock feeds like dry fodders, green fodders could however be bridged by proper post harvest management of all kind of forage resources and search for alternate source of protein rich forage supplement. The most common livestock feed resources are crop reduces (straw, stover, haulms etc). All of these fodder resources are highly voluminous and having lower density varying from 40-70 kg/m3 due to which there transportation, storage and handling are very cumbersome and expensive and therefore cannot be utilized up to a maximum extent. Storage is a repeated phase during transit of agricultural produce and the product needs to be stored from one harvest to next thus, demanding additional carry over as safe guard, against speculation in price and market demand or against shortage and famine

Current correlation functions of ideal fermi gas at finite temperature

Expressions for transverse and longitudinal current-current correlation functions of an ideal Fermi gas describing the current fluctuations induced in the electron system by external probe perpendicular and parallel to the propagation of electron wave, have been obtained at finite temperature. The results obtained for transverse and longitudinal functions are presented for different values of wavelength and frequency at different temperatures. The diamagnetic susceptibility as a function of temperature has also been obtained from transverse current correlation function as its long wavelength and static limit, which smoothly cross over from known quantum values to the classical limit with increase in temperature