High precision measurement of the hyperfine fields of substitutional and defect associated Cd in single crystalline hcp cobalt

The hyperfine fields of Cd in single crystalline hcp Co were measured after simultaneous implantation of 111mCd and 111In. High statistics measurements could be done separately for each parent isotope combining the e--g and g-g PAC techniques. The hyperfine coupling constants wL(CdCo)=422.8(1) Mrad/s and w0(CdCo)=6.14(11) Mrad/s are determined for Cd probes in undisturbed substitutional sites. Several defect associated sites in the hcp Co lattice are clearly seen in the data. Most of the radiation damage created by the ion implantation anneals out at temperatures below 503 K, with only one dominating component surviving at this temperature. This defect is assigned as a probe atom in an interstitial site, surrounded by a vacancy tetrahedron. The corresponding magnetic field and electric field gradient are collinear with the c-axis of the Co lattice, and the respective coupling constants are wL(defect)= 216.7(2) Mrad/s and w0(defect)= 45.3(6) Mrad/s

Functional and optical properties of Au :TiO2 nanocomposite films : the influence of thermal annealing

A set of nanocomposite thin films consisting of Au nanoclusters dispersed in a TiO2 dielectric matrix was deposited by reactive magnetron sputtering, and subjected to thermal annealing in vacuum, at temperatures ranging from 200 to 800 ◦C. The obtained results show that the structure and the size of Au clusters, together with the matrix crystallinity, changed as a result of the annealing, and were shown to be able to change the optical properties of the films and keeping good mechanical properties, opening thus a wide number of possible applications. The crystallization of the gold nanoclusters induced by the annealing was followed by a systematic change in the overall coating behaviour, namely the appearance of surface plasmon resonance (SPR) behaviour. This effect enables to tailor the thin films reflectivity, absorbance and colour coordinates, contributing to the importance of this thin film system. The different attained optical characteristics (reflectance values ranging from interference to metallic-like behaviours and colour varying for interference rainbow-like to several tones of red-brownish), associated with a reasonable mechanical resistance of the coatings (good adhesion to different substrates and hardness values ranging from 5 to 7.5 GPa), induce the possibility to use this film system in a wide range of decorative applications.Fundac¸ ão para a Ciência e Tecnologia (FCT) - PTDC/CTM/70037/2006

W/AlSiTiNx/SiAlTiOyNx/SiAlOx multilayered solar thermal selective absorber coating

Solar thermal energy has often been used as a renewable green energy source. Here we present a design composed of a highly selective solar thermal absorber coating that has been deposited by DC magnetron sputtering. This will consist of four layers: W/AlSiTiNx/SiAlTiOyNx/SiAlOx. The coating that was utilised revealed an excellent average solar thermal absorbance, (alpha = 95.5%) with very low emittance, (epsilon = 9.6% calculated for 500 degrees C) together with an excellent thermal stability after annealed at 500 degrees C, in air for 350 h, and at 630 degrees C in vacuum for 220 h.FCT in the framework of the Strategic Funding UID/FIS/04650/2013 and the financial support of FCT, POCI and PORL operational programs through the project POCI01-0145-FEDER-016907 (PTDC/CTM-ENE/2892/2014), co-financed by European community fund FEDER

Characterization of magnetron sputtered sub-stoichiometric CrAlSiNx and CrAlSiOyNx coatings

The influence of varying nitrogen and oxygen partial pressures on microstructure, mechanical and optical properties of magnetron sputtered CrAlSiNx and CrAlSiOyNx coatings has been studied. The partial pressure of nitrogen reactive gaswas varied from0.037 Pa to 0.15 Pa for CrAlSiNx films, and the N2/O2 (85%:15%) partial pressure was varied from 0.046 Pa to 0.21 Pa for CrAlSiOyNx layers. Transmittance and reflectance of samples were measured and were modeled to obtain the spectral optical constants, n and k. Chemical state, composition, morphology and microstructure of films were analyzed by XPS, RBS, XRD, Raman Spectroscopy and SEM. Films' hardness was evaluated using nanoindentation method. XRD results revealed that the two samples CrAlSiNx with PN =0.15 Pa and CrAlSiOyNx with PNO = 0.21 Pa are polycrystalline with cubic (fcc-B1) structure. On contrary, all other films prepared with lower reactive gases partial pressures are amorphous. The chemical composition changed with the variation of reactive gases partial pressure, although the Cr: Al: Si composition ratio remained approximately constant, 1.25:1.5:1. All samples showed low hardness, mainly due to lower content of reactive gases and higher content of Si. However, the sample CrAlSiNx with PN = 0.15 Pa has the highest value of 11.1 GPa. Optical constants are seen to be very sensitive to reactive gases partial pressure. The refractive index and extinction coefficient were lower for coatings with higher reactive gases partial pressure. These coatings are good candidates for designing selective solar absorber stacks for different applications.The authors acknowledge the support of FCT in the framework of the Strategic Funding UID/FIS/04650/2013 and the financial support of FCT, FOCI and PORL operational programs through the project POCI-01-0145-FEDER-016907 (PTDC/C11/1-ENE/2882/2014), co-financed by European community fund FEDER.info:eu-repo/semantics/publishedVersio

Atomic environment and interfacial structural order of TiAlN/Mo multilayers

Multilayered TiAlN/Mo coatings were deposited by dc reactive magnetron sputtering in a custom-made chamber. In order to assess the composition of these coatings, a combined study of Extended X-ray Absorption Fine Structure (EXAFS) and Rutherford Backscattering Spectrometry (RBS) experiments were performed. Through the simulation of the EXAFS spectra, giving the local environment of the titanium atoms inside the nitride (TiAlN), a cubic phase has been evidenced with aluminium atoms occupying titanium sites. For modulation periods in the range of 3.6–11.8 nm, RBS simulations on these multilayers also enabled the determination of the level of intermixing that occurs at the interfaces as a function of the negative bias voltage and number of layers. It was observed that the intermixing width could be as high as 2.1 nm for the roughest samples (larger periods) or as low as 0.4 nm for those with the sharpest interfaces (smaller periods).Comunidade Europeia (CE). Fundo Europeu de Desenvolvimento Regional (FEDER) -Ministério da Ciência e Tecnologia.Cooperação Científica e Tecnológica Internacional (ICCTI) - Ambassade de France in Portugal - Project no. 543 B3/2001.Fundação para a Ciência e a Tecnologia (FCT) - Programa Operacional “Ciência, Tecnologia, Inovação - POCTI/32670/CTM/2000

Structural evolution of Ti-Al-Si-N nanocomposite coating

Ti–Si–Al–N films were prepared by rf reactive magnetron sputtering, in static and rotation modes, using a wide range of different deposition conditions, which created conditions to obtain Ti–Al–Si–N coatings with different structural arrangements. Films prepared below a critical nitrogen flow, under conditions out of thermodynamic equilibrium, revealed a preferential growth of an fcc (Ti,Al,Si)Nx compound with a small N deficiency. With nitrogen flow above that critical value, the reduction of the lattice parameter was no longer detected. However, a thermal annealing showed that a complete thermodynamically driven segregation of the TiN and Si3N4 phases was not yet obtained. The segregation upon annealing induced a self-hardening and showed a multiphase system, where the crystalline TiN, (Ti,Al)N and (Ti,Al,Si)Nx phases were identified by X-ray diffraction. This behavior is due to the de-mixing of the solid solution associated to a small N deficiency

CrAlSiN barrier layer to improve the thermal stability of W/CrAlSiNx/ CrAlSiOyNx/SiAlOx solar thermal absorber

The influence of adding CrAlSiN barrier layer between the back-reflector tungsten (W) and stainless-steel substrate on thermal stability has been investigated. In previous work, after the annealing in vacuum at 600 ºC, tungsten diffusion from the back-reflection layer towards the stainless-steel substrate was found. In this study, a barrier layer was added and its influence upon the W diffusion was studied. Several designs of multilayer solar selective absorber for high temperature applications were used to test the thermal and chemical stability and oxidation resistance after vacuum annealing. These samples were characterized by Scanning Electron Microscopy (SEM), Rutherford Backscattering Spectrometry (RBS), X-ray diffraction (XRD), Fourier-transform Infrared Spectroscopy (FTIR) and UV–VIS–NIR spectroscopy. All absorber tandems show good thermal stability after vacuum annealing at 600 ºC and the changes in optical constants solar absorptance (α) and thermal emittance (ε) are negligible. In some cases, small changes in the reflectance curves after the first step of annealing were seen. Some changes were found in the oxide layer, due to the incomplete oxidized Si atoms, as confirmed by FTIR analyses. This cannot justify the increase of NIR reflectance observed in the optical stacks after annealing, which can be due to the phase changes of the back-reflector tungsten layer. All layers of stacks are amorphous, except the tungsten layer, which is polycrystalline and shows a columnar growth. The addition of a CrAlSiNP= 0.11 Pa barrier layer between tungsten and stainless-steel substrate proved to be a good solution to control the diffusion of W atoms towards the substrate, whereas using higher nitrogen partial pressure in the high and the low absorption layers reduce the diffusion of Cr from those layers to surface.The authors acknowledge the support of FCT in the framework of the Strategic Funding UID/FIS/04650/2013 and the financial support of FCT, POCI and PORL operational programs through the project POCI01-0145-FEDER-016907 (PTDC/CTM-ENE/2882/2014), co-financed by European community fund FEDER.info:eu-repo/semantics/publishedVersio

A design of selective solar absorber for high temperature applications

This study presents a design of multilayer solar selective absorber for high temperature applications. The optical stack of this absorber is composed of four layers deposited by magnetron sputtering on stainless steel substrates. The first is a back-reflector tungsten layer, which is followed by two absorption layers based on CrAlSiNx/ CrAlSiOyNx structure for phase interference. The final layer is an antireflection layer of SiAlOx. The design was theoretically modelled with SCOUT software using transmittance and reflectance curves of individual thin layers, which were deposited on glass substrates. The final design shows simultaneously high solar absorbance = 95.2 % and low emissivity ε= 9.8% (at 400 ºC) together with high thermal stability at 400 ºC, in air, and 600 ºC in vacuum for 650 h.The authors acknowledge the support of FCT in the framework of the Strategic Funding UID/FIS/04650/2013 and the financial support of FCT, POCI and PORL operational programs through the project POCI-01-0145- FEDER-016907 (PTDC/CTM-ENE/2882/2014), co-financed by European community fund FEDER.info:eu-repo/semantics/publishedVersio

Tuning of the surface plasmon resonance in TiO2/Au thin films grown by magnetron sputtering : the effect of thermal annealing

Nanocomposites consisting of a dielectric matrix, such as TiO2, with embedded noble metal nanoparticles (NPs) possess specific optical properties due to the surface plasmon resonance (SPR) effect, interesting for several applications. The aim of this work is to demonstrate that these properties are sensitive to the nanostructure of magnetron-sputtered TiO2/Au thin films, which can be tuned by annealing. We study the role of the shape and size distribution of the NPs, as well as the influence of the crystallinity and phase composition of the host matrix on the optical response of the films. All these characteristics can be modified by vacuum annealing treatments of the deposited films. A theoretical interpretation and modeling of the experimental results obtained is presented. The model involves a modified Maxwell-Garnett approach for the effective dielectric function of the composite (describing the SPR effect) and the transfer matrix formalism for multilayer optics. Input data are based on the experimental information obtained from the detailed structural characterization of the films. It is shown that the annealing treatments can be used for controlling the optical properties of the composite films, making them attractive for decorative coatings.Fundação para a Ciência e a Tecnologia (FCT) - PTDC/CTM/70037/200