Effect of 457 nm Diode-Pumped Solid State Laser on the Polymerization Composite Resins: Microhardness, Cross-Link Density, and Polymerization Shrinkage

Objective: The purpose of the present study was to test the usefulness of 457 nm diode-pumped solid state (DPSS) laser as a light source to cure composite resins. Materials and methods: Five different composite resins were light cured using three different light-curing units (LCUs): a DPSS 457 nm laser (LAS), a light-emitting diode (LED), and quartz-tungsten-halogen (QTH) units. The light intensity of LAS was 560 mW/cm(2), whereas LED and QTH LCUs was ∼900 mW/cm(2). The degree of polymerization was tested by evaluating microhardness, cross-link density, and polymerization shrinkage. Results: Before water immersion, the microhardness of laser-treated specimens ranged from 40.8 to 84.7 HV and from 31.7 to 79.0 HV on the top and bottom surfaces, respectively, and these values were 3.3–23.2% and 2.9–31.1% lower than the highest microhardness obtained using LED or QTH LCUs. Also, laser-treated specimens had lower top and bottom microhardnesses than the other LCUs treated specimens by 2.4–19.4% and 1.4–27.8%, respectively. After ethanol immersion for 24 h, the microhardness of laser-treated specimens ranged from 20.3 to 63.2 HV on top and bottom surfaces, but from 24.9 to 71.5 HV when specimens were cured using the other LCUs. Polymerization shrinkage was 9.8–14.7 μm for laser-treated specimens, and these were significantly similar or lower (10.2–16.0 μm) than those obtained using the other LCUs. Conclusions: The results may suggest that the 457 nm DPSS laser can be used as a light source for light-curing dental resin composites

Regulação da embriogênese semática in vitro com ênfase do papel de hormonios endógenos

Different aspects of the in vitro somatic embryogenesis regulation are reviewed in this paper.work. A description of g General aspects, such as terminology, uses, stages of development and factors associated with the somatic embryogenesis, are described. is carried out. Although a brief description ofn the effects of the addition of different plant growth regulators to the culture medium wasis given, the article is centereds itself on the effect that the endogenous hormone concentrations in the initial explants and in the tissue cultures derived from them could play oin the induction and expression of somatic embryogenesis. It is significant that few to emphasize the low amount of systematic studies have been conducted, in this subject, in which different species and hormone groups were compared in cultures with and without embryogenic capacity. Moreover, the lack of correlation between the results presented in different studies the distinct works indicates that the hormone content of the cultures is not the only factor involved.Neste trabalho se faz uma revisão de diversos aspectos da regulação da embriogêneses somático in vitro. Vários aspectos gerais a este fenômeno tem sido discutidos, tais como a definição de terminologia, descrição de eventuais aplicações, seus estados de desenvolvimento e outros fatores associados com sua indução e expressão. Embora se faça uma breve descrição do efeito da adição de diferentes reguladores de crescimento ao meio de cultivo, o artigo está centrado no efeito que as concentrações hormonais endogênas nos explantes iniciais e nos cultivos in vitro derivados deles podem ter na indução e expressão da embriogênese somática. Tem de se fazer ênfase na pouca quantidade de estudos sistemáticos realizados neste tema que comparem em várias espécies e diferentes grupos hormonais em cultivos com e sem competência embriogênica. Finalmente, indica-se que a falta de correlação entre os resultados destes poucos trabalhos parece indicar que os conteúdos hormonais endôgenos não são os únicos fatores envolvidos neste fenômeno.Grman Academic Exchange Service//DAAD/AlemaniaUCR::Vicerrectoría de Investigación::Unidades de Investigación::Ciencias Agroalimentarias::Centro para Investigaciones en Granos y Semillas (CIGRAS