Fundamentals Studies Of Electro-Silver Plating Process.

The growth of electronic industry as a whole, and the demand to support the expansion of its underlying infrastructure will continue to drive the improvements in electroplating process. In order to improve existing electroplating process, the study of fundamentals aspects for electroplating process has become important

PI Controller Design Using Model Reference Adaptive Control Approaches For A Chemical Process

This paper discusses the application of Model Reference Adaptive Control (MRAC) concepts in designing an adaptive feedback controller to tune a given PI controller. The approaches of using the gradient (MIT) and stability (Lyapunov) methods are shown. The effectiveness of the two methods are shown through simulation and comparison is made to show which method give the best result. The results show that the stability method produces a better result

Temperature influence on total volatile compounds (TVOCs) inside the car cabin of visible light transmittance

In the automotive industry indoor air quality or Vehicle Indoor Air Quality (VIAQ) are caused by various substances emitted from interior materials inside a vehicle. The volatile organic compounds (VOCs) are an example of emitted substances from the interior materials which is harmful to the human body. As stated by previous researches, there is a strong correlation between the total VOCs emission and interior temperature. This occurs due to the solar radiation through the back window glasses, windscreen and side window glasses. This trapped heat can accelerate the melting process of trim materials such as hard plastic and rubber, thus causing the emission of total VOCs (TVOCs). Therefore, reducing the percentage of visible light transmittance (VLT) will help to reduce radiation process. The aim of this study is to investigate the effect of VLT level on TVOCs emission in the vehicle cabin under static condition (parked and unventilated) and operating condition (driving and air-conditioned). For static condition the result shows that the TVOCs concentration linearly decreases whenever the percentage of VLT level decreases. However, for operating condition the percentage of VLT have less significance after 50 minutes driving time. In conclusion, the VLT levels have a strong relationship to the TVOCs concentration despite after a long driving time

Distributed Cooperative Spectrum Sensing in Cognitive Radio Networks with Adaptive Detection Threshold

This paper proposes a cooperative sensing algorithm based on distributedfusion strategy and maintained probability of false alarm for cognitive radio. It furtherintroduces a reporting strategy that discusses how cooperative sensing in distributedmanner can select among possible candidates in order to reduce bandwidthrequirement. We adopted a dynamic distributed architecture for cooperative sensingbased on the link quality and found condition on the channel quality for cooperation tobe beneficial. Using probability of detection, and BER metrics we evaluated theperformance improvement of distributed cooperation over direct cooperation and noncooperativesensing. We used analytical formulation with possible candidate selectioncriteria to investigate and maximize the cooperation gain. By employing suchdistribution and selection technique, the reporting error due to the fading channel isreduced. Results show that the method effectively improve performance of sensing, itincrease the probability of detection up to 0.9 at <0.1 probability of false alarm.Sensitivity requirement is reduced with network scale and the number of nodesparticipate in decision fusion is reduced about 42% at probability of false alarm 0.1.ROC curve has obvious improvement compared with existing methods

Development of Standard Approach for Sickle Blade Manufacturing

The sickle blade used in the motorised palm cutter known as “CANTAS” provides fast, easy and safe pruning and harvesting for those hard to reach applications. Jariz Technologies Company is experiencing problem in the consistency of sickle blade which was supplied by various blade manufacturers. Identifying the proper blade material with a certain hardness value would produce a consistent as well as long lasting sickle blade. A Standard Operating Procedure (SOP) in the manufacturing of the sickle blades was suggested to ensure a consistent blade. From this study, the optimum temperature for hardening and tempering of SUP 9 had been identified as 850 °C for hardening and 480 °C for tempering. The final hardness after heat treatment for SUP 9 was around 55HRC

Simulation and analysis for harvesting Dioscorea hispida tubers

This study discussed an analysis and simulation of fixture stand structure that will use for data collection of force required for harvesting the tubers of Dioscorea hispida. The tubers were surrounded by roots which were well gripped to the soil which made harvesting process difficult. Therefore, a new tool fixture equipped with digital force gauge device to gripped stem dioscorea hispida is required. Imada digital force measurement gauges are state-of-the-art, instruments capable of the highly accurate measurements required in quality testing to determine the strength or functionality of a part or product. The information from the experiments is used to model and simulate the tool in Computer Aided Design (CAD) environment. The solid modelling software Solidworks was used for the design, modelling and simulation of the equipment and the finite element analysis to determine the stress affected on various fixture designs

Assessment of imbalance among environmental and economic performance within Malaysian manufacturing industry: a sustainable approach

Sustainability has emerged as a key area of concern especially for manufacturing industry to address major environmental issues. Carbon dioxide emission has increased rapidly over the past few decades resulting in harmful outcomes such as global warming, climate change, water and air pollution and degrading environmental performance. The objective of this study is to assess a descriptive study evaluate the imbalance between economic and environmental performance of Malaysian manufacturing industry in general. Secondary data of both economic performance and environmentaperformance (2011-2016) was descriptively examined. The findings are revealed a significant imbalance between two indicators. In addition, this study also proposed a conceptual model based on previous literature how to reduce this imbalance and create sustainable performance within Malaysian manufacturing firms

Robust beamforming and user clustering for guaranteed fairness in downlink NOMA with partial feedback

In this paper, a downlink multiuser non-orthogonal multiple access (NOMA) with full and partial channel state information (CSI) feedback is considered. We investigate beam design and user clustering from the throughput-fairness trade-off perspective. To enhance this trade-off, two proportional fairness (PF) based scheduling algorithms are proposed, each has two stages. The first algorithm is based on integrating the maximum product of effective channel gains and the maximum signal to interference ratio with the PF principle (PF-MPECG-SIR), to select the strong users in the first stage and the weak users in the second stage. This algorithm is designed to maximize the throughput with moderate fairness enhancement. Whereas, in the second algorithm, the MPECG and the maximum correlation are combined within the PF selection criterion (PF-MPECG-CORR) in order to maximize the fairness with a slight degradation in the total throughput. In addition, we present an optimal power allocation that can achieve a high data rate for the overall system without sacrificing the sum-rate of weak users under full and partial CSI. Simulation results show that the proposed PF-MPECG-CORR can significantly improve the fairness up to 50.82% and 44.90% with only 0.42% and 1.13% degradation in the total throughput, for full and partial CSI, respectively. All these performance gains are achieved without increasing the computational complexity