Flow direction measurement with fixed probes

Fixed-position probes for determination of flow direction in one and two planes are tested over a wide range of Reynolds numbers and Mach numbers. The work is limited to tests of a single probe design for two dimensional flow and a single design for three dimensional flow

High-pressure gas facilitates calibration of turbine flowmeters for liquid hydrogen

Nitrogen gas at a pressure of 60 atmospheres and ambient temperature facilitates the calibration of turbine flowmeters used for monitoring the flow of liquid hydrogen in cryogenic systems. Full-scale calibration factors can be obtained to an accuracy of 0.4 percent

Nonsteady flow-direction measurement

Nonsteady flow probe uses miniature pressure transducers mounted within probe support very close to tube inlets. Response speed depends on internal volume between tube inlet and pressure transducer location

Miniature drag-force anemometer

A miniature drag-force anemometer is described which is capable of measuring dynamic velocity head and flow direction. The anemometer consists of a silicon cantilever beam 2.5 mm long, 1.5 mm wide, and 0.25 mm thick with an integrated diffused strain-gage bridge, located at the base of the beam, as the force measuring element. The dynamics of the beam are like those of a second-order system with a natural frequency of about 42 kHz and a damping coefficient of 0.007. The anemometer can be used in both forward and reversed flow. Measured flow characteristics up to Mach 0.6 are presented along with application examples including turbulence measurements

Miniature probes for use in gas turbine testing

Several examples of miniature probes (null type as well as fixed position) are presented which have proved useful in aircraft and space power systems component testing and are applicable to automotive gas turbine testing. These probes are used to determine component or system performance from the measurement of gas temperature as well as total and static pressure, and flow direction. Detailed drawings of the sensors are presented along with experimental data covering the flow characteristics over the range of intended use

Miniature drag-force anemometer

A miniature drag force anemometer is described which is capable of measuring unsteady as well as steady state velocity head and flow direction. It consists of a cantilevered beam with strain gages located at the base of the beam as the force measuring element. The dynamics of the beam are like those of lightly damped second order system with a natural frequency as high as 40 kilohertz depending on beam geometry and material. The anemometer is used in both forward and reversed flow. Anemometer characteristics and several designs are presented along with discussions of several applications

Optical crossed-beam investigation of local sound generation in jets

Cross correlation of optical signals from two light beam sound detectors for jet noise source localizatio

Performance of mass flux probe in a Mach 3 stream

Performance of mass flux probe in Mach 3 strea

Enthalpy and stagnation temperature determination of a high temperature laminar flow gas stream Patent

Measuring conductive heat flow and thermal conductivity of laminar gas stream in cylindrical plug to simulate atmospheric reentr