Apparent stress-strain relationships in experimental equipment where magnetorheological fluids operate under compression mode

Abstract: This paper presents an experimental investigation of two different magnetorheological ( MR) fluids, namely, water-based and hydrocarbon-based MR fluids in compression mode under various applied currents. Finite element method magnetics was used to predict the magnetic field distribution inside the MR fluids generated by a coil. A test rig was constructed where the MR fluid was sandwiched between two flat surfaces. During the compression, the upper surface was moved towards the lower surface in a vertical direction. Stress-strain relationships were obtained for arrangements of equipment where each type of fluid was involved, using compression test equipment. The apparent compressive stress was found to be increased with the increase in magnetic field strength. In addition, the apparent compressive stress of the water-based MR fluid showed a response to the compressive strain of greater magnitude. However, during the compression process, the hydrocarbon-based MR fluid appeared to show a unique behaviour where an abrupt pressure drop was discovered in a region where the apparent compressive stress would be expected to increase steadily. The conclusion is drawn that the apparent compressive stress of MR fluids is influenced strongly by the nature of the carrier fluid and by the magnitude of the applied current

The performance of magnetorheological fluid in squeeze mode

Abstract: In magnetorheological (MR) fluid, the rheological properties can be changed in a controlled way, the changes being reversible and dependent on the strength of the magnetic field. The fluids have potentially beneficial applications when placed in various geometrical arrangements. The squeeze mode is a geometrical arrangement where two flat parallel solid surfaces, facing each other, are pushed towards each other by an external force operating at right angles to the surfaces. The liquid initially in the gap between them is free to move away from this increasingly small gap, and it does so by flowing parallel to the surfaces, and collecting in a region where it is no longer in the gap between them. The performance of an MR fluid in compression ( squeeze) mode has been studied with the magnetic field being generated by a coil carrying different magnitudes of DC electrical current. A test rig was designed to perform this operation with the flat surfaces being horizontal and being pushed together in a vertical direction and the liquid being forced to move in all directions in a horizontal plane. The rig operated by decreasing the size of the gap at a constant rate. For each trial the current in the coil was kept constant and the instantaneous compressive force was recorded. When plotting compressive stress against compressive strain for each trial, the slope of the curve was found to be larger in general when the current was larger. This was an expected result; however, the behaviour is more complicated than this. For a significant range of values of compressive strain, the slope falls to zero, so that the compressive stress shows no increase during this period while the compressive strain continues to increase. The details of this behaviour are strongly dependent on the initial size of the ga