To the question of the intensification of the processes of uranium extraction from refractory raw materials

Recently, one of the main directions for increasing the extraction of uranium from difficult-to-hide ores is the use of intensifiers, which allow the most complete transfer of uranium from one valence state to another. In the article, the catalyst “M-1”, which is a compound of transition metals, is considered as an intensifier. Comparison of the kinetic dependencies of the sorption extraction of uranium by the ionites from the productive solutions of leaching of uranium-bearing ore in the presence of the “M-1” catalyst showed that they differ insignificantly. The possibility of sorption of uranium from productive solutions by natural sorbents in comparison with synthetic sorbents is investigated

Research on sorption properties of phosphoric production slag-waste

On the territory there are phosphorus-containing wastes - phosphorus slags, the basis of which is volostanite. The study of phosphorus slag as a uranium sorbent is of theoretical and practical interest. In the course of the research, comparable data were obtained on the sorption of the initial and activated slag by different reagents. The optimal conditions for the activation of phosphorus slag in order to increase its sorption properties have been determined

Intensification of copper leaching from heaps using biological oxidation

The article presents the results of experiments intended to leach copper from ore heaps of complex mineral composition biochemically. The processing of such heaps is complicated due to the presence of oxidized copper minerals among significant fragments of sulfide minerals and iron-calcium silicates. This factor does not allow to perform standard sulfuric acid leaching effectively without the use of additional oxidation catalysts, or to apply beneficiation methods for that kind of raw materials. Use of A. Ferrooxidans bacteria adapted to the composition of the copper dump, as a bio-catalytic agent, significantly accelerates the leaching process and increases the copper recovery degree into the productive solution

Intensification of copper leaching from heaps using biological oxidation

The article presents the results of experiments intended to leach copper from ore heaps of complex mineral composition biochemically. The processing of such heaps is complicated due to the presence of oxidized copper minerals among significant fragments of sulfide minerals and iron-calcium silicates. This factor does not allow to perform standard sulfuric acid leaching effectively without the use of additional oxidation catalysts, or to apply beneficiation methods for that kind of raw materials. Use of A. Ferrooxidans bacteria adapted to the composition of the copper dump, as a bio-catalytic agent, significantly accelerates the leaching process and increases the copper recovery degree into the productive solution

Research of biochemical gold recovery method using high-arsenic raw materials

This article contains the results of experiments to recover gold from complex mineral raw materials containing more than 15 % arsenic. Laboratory tests showed that standard cyanidation recovers only 26,4 % of gold into the solution. Additional oxidizing reagents used increase the leaching efficiency and enable to recover more than 40 % of gold during subsequent cyanidation. The efficiency has been established for replacement of cyanide with thiourea and thiosulfate solutions. 79,5 %, i.e. the maximum recovery rate, was found in the experiment with preliminary oxidation with T. Ferrooxidans, a bacterial culture, followed by leaching with a thiourea solution

Revisiting the Kazakhstan natural sorbents modification

Kazakhstan ranks second in the world in natural uranium reserves and a leading position in its production. Hydrometallurgical processing of uranium raw materials results in a significant amount of liquid technogenic wastes containing radionuclides. Sorption cleaning methods for these wastes are the most effective ones. However, the high cost of synthetic sorbents and the low sorption capacity of natural ones is a deterrent to their use. So, to increase the sorption capacity of natural sorbents by their modification is an urgent problem. In this paper, a method to modify Kazakhstani natural zeolite was proposed by us and previously not investigated. Also the data of physicochemical studies of the initial raw material and the modified product was given and the increase in the natural sorbent specific surface in the modification process was demonstrated

Effects of microorganisms and their metabolites on nonferrous and precious metal ores leaching

There were spent researches and elaboration on biochemical leaching of persistent gold-bearing raw materials. Alongside, properties of bacterial solutions were studied, with the help of mathematical planning of experiments there was spent an analysis of the process on biochemical leaching of gold-bearing flotation concentrate and gold sorption from solutions, kinetic floating concentrate leaching parameters in alkaline-cyanide and bacterial solution process were established. There were spent huge laboratory tests on biochemical sorption leaching of flotation concentrate technology of one of gold mining enterprises of Kazakhstan, recommendations on elaborated technology into industrial manufacture were presented as well

Extraction Of Non-Ferrous And Noble Metals From Mill Tailing By Solutions In The Presence Of Oxidizing Agents

Optimal parameters of leaching of non-ferrous and noble metals from mill tailing by solutions in the presence of oxidizing agents (paramagnetic catalyst) are investigated.The optimum concentration of sulfuric acid and sodium cyanide was determined in the leaching of gold-containing mill tailings.It is shown that the presence of oxidizing agents in solutions leads to an increase in the extraction of metals into the solution. It was found that the extraction of gold, copper, zinc, lead and manganese during the process of conventional sulfuric acid leaching is significantly lower than during the presence of an oxidizing agent.Dissolution of copper, depending on the different concentration of sulfuric acid (g / dm3: 5.0, 10.0, 15.0, 20.0) showed that the degree of metal extraction by using oxidizing agents increases, respectively, 35.2%, 64.0%, 65.0%, 65.9%