Effect of clay minerals on copper reclamation from leached solution

157-165The present investigation focus on the recovery of copper (Cu) ions from printed circuit boards (PCBs) by applying simultaneous treatment of leaching and adsorption, as a novel approach. The PCBs are subjected to chemical leaching using aqua regia resulted in a Cu recovery of 97.06%. The leached solution is treated for removal of Cu with activated bent clay as an adsorbent. The optimum condition of process variables is found through central composite design-response surface methodology (RSM-CCD). The maximum %Cu removal of 97.33% is obtained at the optimum operating conditions of adsorbent size of 0.04 mm, adsorbent dosage of 3.5 g.L-1 and the temperature of 80C with 0.845 desirability. This investigation is found to be an eco-friendly way to recover copper ions and does not cause any environmental issues

Clay Minerals Effects for Metal Reclamation from Leached Solution

The recent advancements in technology play a pivotal role in mankind’s life and have a significant stint in the generation of E-waste. The present investigation focuses on the recovery of heavy metals from Printed Circuit boards (PCBs) by applying two efficient techniques viz., leaching and adsorption. A combination of leaching and adsorption is a novel and productive approach to recovering heavy metals from like PCBs. After the phases of chemical leaching, the solution was recovered through adsorption and is eco-friendly. The process is carried out to increase the separation rate, reduce the time spent and reach the limits of incineration and pyrolysis methods. Adsorption provides the recovery of heavy metals with respect to the required adsorbent since it is a surface phenomenon. The optimum condition of process variables was found through response surface methodology (RSM). The maximum recovery of copper ions (97.33%) was obtained at the optimum operating conditions such as adsorbent size of 0.04 mm, adsorbent dosage of 3.5 gm L−1 and the temperature of 80°C with 0.845 desirability. This investigation was found to be an eco-friendly way to recover copper ions and does not cause any environmental issues

Copper-Doped Zinc Oxide Nanoparticles: Synthesis, Characterization, and Application for Adsorptive Removal of Toxic Azo Dye

The goal of this research was to employ copper-doped zinc oxide nanoparticles (Cu/ZnONPs) as an adsorbent to remove the potentially toxic azo dye Congo red (CR). The Cu/ZnONPs were made using a chemical coprecipitation method, and their characteristics were examined using XRD, SEM, EDS, and FTIR methods. The response surface methodology (RSM) central composite design (CCD) is used to optimize the operational parameters’ agitation time, adsorbent dosage, solution pH, and initial concentration of CR solution during the adsorption process. The agitation period of 29.48 min, the Cu/ZnONP dosage of 0.301 g/L, the solution pH of 6.96, and the CR initial concentration of 90 mg/L resulted in a maximum CR adsorption of 94.14% and a desirability of 0.976. The kinetic findings fit the pseudo-second-order kinetic equation, and the equilibrium data agreed with the Langmuir isotherm (maximum uptake capacity qmax = 250 mg/g). During the thermodynamic experiments, endothermic, spontaneous, and physical adsorptions were observed

Statistical Optimization of Bioleaching for Simultaneous Recovery of Cu, Sn, Pb, and Zn from Computer-Printed Circuit Boards

Electronic garbage is one of the fastest-growing waste streams. Its disposal and appropriate management are a worldwide concern. Printed circuit boards (PCBs) are critical components in contemporary electronic gadgets that contain toxic elements. Bioprocessing of PCBs for metal recovery employing microbial methods has evolved as a green solution in metallurgical operations. Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans were used in this study to leach metals from powdered waste PCBs. The RSM is used for optimizing the leaching conditions. The optimal conditions obtained were a bacterial activation period of 28 days, a pulp density of 23 g/L, and a temperature of 31°C. A confirmatory experiment under these optimal circumstances yielded recovery rates of Cu2+, Sn2+, Pb2+, and Zn2+ of 95.62%, 96.27%, 95.6%, and 98.25%, respectively