596 research outputs found

    Salinity changes in the estuary and the coastal sea adjacent to the portmouth at Cochin

    Get PDF
    The article deals with the details of salinity changes in the Cochin estuary and its influence and interrelations with the Vembanad lake

    Effect of intensive melt shearing on the formation of Fe-containing intermetallics in LM24 Al-alloy

    Get PDF
    Fe is one of the inevitable and detrimental impurities in aluminium alloys that degrade the mechanical performance of castings. In the present work, intensive melt shearing has been demonstrated to modify the morphology of Fe-containing intermetallic compounds by promoting the formation of compact α-Al(Fe,Mn)Si at the expense of needle-shaped β-AlFeSi, leading to an improved mechanical properties of LM24 alloy processed by MC-HPDC process. The promotion of the formation of α -Al(Fe, Mn)Si phase is resulted from the enhanced nucleation on the well dispersed MgAl 2O 4 particles in the melt. The Fe tolerance of LM24 alloy can be effectively improved by combining Mn alloying and intensive melt shearing

    Estuarine oceanography of the Vembanad lake Part iii: the region between Cochin and The 30 m depth off port mouth

    Get PDF
    The time-distribution patterns of temperature, salinity and oxygen content along the shipping channel from inside the port to a distance of about 15 km out into the Arabian sea during 1981-1983 are presented and discussed in this third and last part of the estuarine oceanographic study of the Vembanad lake. The distribution patterns show that hydrologically the nearshore region up to 12 or 15 km off Cochin is more or less identical to the adjacent coastal region, without having any apparent influence of the lake, during the dry months January to May. During the wet months, however, the discharge from the lake, characterized by suspended sediments, spreads as a plume, over highly saline and cold upwelled water, turning the region into an intermittent estuary. Though the end of the plume can often be pinpointed around the 30in depthline, by a sharp change of colour and filaments formed of floating objects of land and freshwater origin, the presence of an actual plume front is doubtful because of the weak surface convergence then occurring in a broad area off Cochin

    The effect of high dose antibiotic impregnated cement on rate of surgical site infection after hip hemiarthroplasty for fractured neck of femur : a protocol for a double-blind quasi randomised controlled trial

    Get PDF
    Background: Mortality following hip hemiarthroplasty is in the range of 10-40% in the first year, with much attributed to post-operative complications. One such complication is surgical site infection (SSI), which at the start of this trial affected 4.68% of patients in the UK having this operation. Compared to SSI rates of elective hip surgery, at less than 1%, this figure is elevated. The aim of this quasi randomised controlled trial (RCT) is to determine if high dose antibiotic impregnated cement can reduce the SSI in patients at 12-months after hemiarthroplasty for intracapsular fractured neck of femur. Methods: 848 patients with an intracapsular fractured neck of femur requiring a hip hemiarthroplasty are been recruited into this two-centre double-blind quasi RCT. Participants were recruited before surgery and quasi randomised to standard care or intervention group. Participants, statistician and outcome assessors were blind to treatment allocation throughout the study. The intervention consisted of high dose antibiotic impregnated cement consisting of 1 gram Clindamycin and 1 gram of Gentamicin. The primary outcome is Health Protection Agency (HPA) defined deep surgical site infection at 12 months. Secondary outcomes include HPA defined superficial surgical site infection at 30 days, 30 and 90-day mortality, length of hospital stay, critical care stay, and complications. Discussion: Large randomised controlled trials assessing the effectiveness of a surgical intervention are uncommon, particularly in the speciality of orthopaedics. The results from this trial will inform evidence-based recommendations for antibiotic impregnated cement in the management of patients with a fractured neck of femur undergoing a hip hemiarthroplasty. If high dose antibiotic impregnated cement is found to be an effective intervention, implementation into clinical practice could improve long-term outcomes for patients undergoing hip hemiarthroplasty

    Oceanography of the Arabian Sea With particular reference to the southwest monsoon

    Get PDF
    The oceanographic conditons in the Arabian Sea during the southwest monsoon is discussed. The main features occurring during this monsoon period in the Arabian Sea is the coastal upwelling along the southwest coast of India, the intensity of which is highest in the region Cochin to Mangalore. The currents along the coast during this season is southward. This also the season when mud-banks are formed at certain places along the coast. The effect of upwelling on primary and secondary production is also discussed

    Amicable pairs and aliquot cycles for elliptic curves

    Full text link
    An amicable pair for an elliptic curve E/Q is a pair of primes (p,q) of good reduction for E satisfying #E(F_p) = q and #E(F_q) = p. In this paper we study elliptic amicable pairs and analogously defined longer elliptic aliquot cycles. We show that there exist elliptic curves with arbitrarily long aliqout cycles, but that CM elliptic curves (with j not 0) have no aliqout cycles of length greater than two. We give conjectural formulas for the frequency of amicable pairs. For CM curves, the derivation of precise conjectural formulas involves a detailed analysis of the values of the Grossencharacter evaluated at a prime ideal P in End(E) having the property that #E(F_P) is prime. This is especially intricate for the family of curves with j = 0.Comment: 53 page

    BOBMEX: the Bay of Bengal monsoon experiment

    Get PDF
    The first observational experiment under the Indian Climate Research Programme, called the Bay of Bengal Monsoon Experiment (BOBMEX), was carried out during July-August 1999. BOBMEX was aimed at measurements of important variables of the atmosphere, ocean, and their interface to gain deeper insight into some of the processes that govern the variability of organized convection over the bay. Simultaneous time series observations were carried out in the northern and southern Bay of Bengal from ships and moored buoys. About 80 scientists from 15 different institutions in India collaborated during BOBMEX to make observations in most-hostile conditions of the raging monsoon. In this paper, the objectives and the design of BOBMEX are described and some initial results presented. During the BOBMEX field phase there were several active spells of convection over the bay, separated by weak spells. Observation with high-resolution radiosondes, launched for the first time over the northern bay, showed that the magnitudes of the convective available potential energy (CAPE) and the convective inhibition energy were comparable to those for the atmosphere over the west Pacific warm pool. CAPE decreased by 2-3 kJ kg-1 following convection, and recovered in a time period of 1-2 days. The surface wind speed was generally higher than 8 m s-1. The thermohaline structure as well as its time evolution during the BOBMEX field phase were found to be different in the northern bay than in the southern bay. Over both the regions, the SST decreased during rain events and increased in cloud-free conditions. Over the season as a whole, the upper-layer salinity decreased for the north bay and increased for the south bay. The variation in SST during 1999 was found to be of smaller amplitude than in 1998. Further analysis of the surface fluxes and currents is expected to give insight into the nature of coupling

    New iterative methods for linear inequalities

    Full text link
    New iterative methods for solving systems of linear inequalities are presented. Each step in these methods consists of finding the orthogonal projection of the current point onto a hyperplane corresponding to a surrogate constraint which is constructed through a positive combination of a group of violated constraints. Both sequential and parallel implementations are discussed.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/45240/1/10957_2004_Article_BF00939954.pd

    The Influence of the effect of solute on the thermodynamic driving force on grain refinement of Al alloys

    Get PDF
    Grain refinement is known to be strongly affected by the solute in cast alloys. Addition of some solute can reduce grain size considerably while others have a limited effect. This is usually attributed to the constitutional supercooling which is quantified by the growth restriction factor, Q. However, one factor that has not been considered is whether different solutes have differing effects on the thermodynamic driving force for solidification. This paper reveals that addition of solute reduces the driving force for solidification for a given undercooling, and that for a particular Q value, it is reduced more substantially when adding eutectic-forming solutes than peritectic-forming elements. Therefore, compared with the eutectic-forming solutes, addition of peritectic-forming solutes into Al alloys not only possesses a higher initial nucleation rate resulted from the larger thermodynamic driving force for solidification, but also promotes nucleation within the constitutionally supercooled zone during growth. As subsequent nucleation can occur at smaller constitutional supercoolings for peritectic-forming elements, a smaller grain size is thus produced. The very small constitutional supercooling required to trigger subsequent nucleation in alloys containing Ti is considered as a major contributor to its extraordinary grain refining efficiency in cast Al alloys even without the deliberate addition of inoculants.The Australian Research Council (ARC DP10955737)

    Trace Formulae and Spectral Statistics for Discrete Laplacians on Regular Graphs (I)

    Full text link
    Trace formulae for d-regular graphs are derived and used to express the spectral density in terms of the periodic walks on the graphs under consideration. The trace formulae depend on a parameter w which can be tuned continuously to assign different weights to different periodic orbit contributions. At the special value w=1, the only periodic orbits which contribute are the non back- scattering orbits, and the smooth part in the trace formula coincides with the Kesten-McKay expression. As w deviates from unity, non vanishing weights are assigned to the periodic walks with back-scatter, and the smooth part is modified in a consistent way. The trace formulae presented here are the tools to be used in the second paper in this sequence, for showing the connection between the spectral properties of d-regular graphs and the theory of random matrices.Comment: 22 pages, 3 figure
    corecore