Effects of commercial fishing on local abundance of Pacific cod (Gadus macrocephalus) in the Bering Sea

Groundfish fisheries in the southeast Bering Sea in Alaska have been constrained in recent years by management measures to protect the endangered Steller sea lion (Eumetopias jubatus). There is concern that the present commercial harvest may produce a localized depletion of groundfish that would affect the foraging success of Steller sea lions or other predators. A three-year field experiment was conducted to determine whether an intensive trawl fishery in the southeast Bering Sea created a localized depletion in the abundance of Pacific cod (Gadus macrocephalus). This experiment produced strongly negative results; no difference was found in the rate of seasonal change in Pacific cod abundance between stations within a regulatory no-trawl zone and stations in an immediately adjacent trawled area. Corollary studies showed that Pacific cod in the study area were highly mobile and indicated that the geographic scale of Pacific cod movement was larger than the spatial scale used as the basis for current no-trawl zones. The idea of localized depletion is strongly dependent on assumed spatial and temporal scales and contains an implicit assumption that there is a closed local population. The scale of movement of target organisms is critical in determining regional effects of fishery removals

Numerical model of light propagation through Fabry-Perot etalons composed of interfaces with non-planar surface topography

We present a model that calculates optical fields reflected and transmitted by a Fabry-Perot (FP) etalon composed of interfaces with non-planar surface topography. The model uses the Rayleigh-Rice theory, which predicts the fields reflected and transmitted by a single interface, to account for the non-planar surface topography of each interface. The Rayleigh-Rice theory is evaluated iteratively to account for all round trips that light can take within the FP etalon. The model predictions can then be used to compute Interferometer transfer function (ITF)s, by performing wavelength or angle resolved simulations enabling predictions of the bandwidth, peak transmissivity, and sensitivity of FP etalons. The model was validated against the Pseudospectral time-domain (PSTD) method, which resulted in good agreement. Since the model accuracy is expected to reduce as the Root mean square (RMS) of the topographic map increases, the error in the model’s predictions was studied as a function of topographic map RMS. Finally, application of the model was exemplified by predicting the impact of roughness on ITFs and computing the changes in FP etalon transmissivity as cavity thickness is modulated by an ultrasonic wave

On the inverse problem in optical coherence tomography

We examine the inverse problem of retrieving sample refractive index information in the context of optical coherence tomography. Using two separate approaches, we discuss the limitations of the inverse problem which lead to it being ill-posed, primarily as a consequence of the limited viewing angles available in the reflection geometry. This is first considered from the theoretical point of view of diffraction tomography under a weak scattering approximation. We then investigate the full non-linear inverse problem using a variational approach. This presents another illustration of the non-uniqueness of the solution, and shows that even the non-linear (strongly scattering) scenario suffers a similar fate as the linear problem, with the observable spatial Fourier components of the sample occupying a limited support. Through examples we demonstrate how the solutions to the inverse problem compare when using the variational and diffraction-tomography approaches

Implementing Non-Projective Measurements via Linear Optics: an Approach Based on Optimal Quantum State Discrimination

We discuss the problem of implementing generalized measurements (POVMs) with linear optics, either based upon a static linear array or including conditional dynamics. In our approach, a given POVM shall be identified as a solution to an optimization problem for a chosen cost function. We formulate a general principle: the implementation is only possible if a linear-optics circuit exists for which the quantum mechanical optimum (minimum) is still attainable after dephasing the corresponding quantum states. The general principle enables us, for instance, to derive a set of necessary conditions for the linear-optics implementation of the POVM that realizes the quantum mechanically optimal unambiguous discrimination of two pure nonorthogonal states. This extends our previous results on projection measurements and the exact discrimination of orthogonal states.Comment: final published versio

Increasing the Q-factor of Fabry-Perot etalons using focused Bessel beam illumination

Sensing and filtering applications often require Fabry-Perot (FP) etalons with an Interferometer Transfer Function (ITF) having high visibility, narrow Full Width at Half Maximum (FWHM), and high sensitivity. For the ITF to have these characteristics, the illumination beam must be matched to the modes of the FP cavity. This is challenging when a small illumination element size is needed, as typical focused beams are not matched to the FP cavity modes. Bessel beams are a potential alternative as their structure resembles the FP cavity modes while possessing a focused core. To study the feasibility of using Bessel beam illumination, in this Letter, ITFs of an FP etalon were measured using Bessel and Gaussian illumination beams. A Bessel beam with core size of 28 µm provided an ITF with visibility 3.0 times higher, a FWHM 0.3 times narrower, and a sensitivity 2.2 times higher than a Gaussian beam with waist 32 µm. The results show that Bessel beam illumination can provide ITFs similar to that of collimated beam illumination while also having with a focused core.</p

Error tolerance and tradeoffs in loss- and failure-tolerant quantum computing schemes

Qubit loss and gate failure are significant problems for the development of scalable quantum computing. Recently, various schemes have been proposed for tolerating qubit loss and gate failure. These include schemes based on cluster and parity states. We show that by designing such schemes specifically to tolerate these error types we cause an exponential blowout in depolarizing noise. We discuss several examples and propose techniques for minimizing this problem. In general, this introduces a tradeoff with other undesirable effects. In some cases this is physical resource requirements, while in others it is noise rates

Fabrication of High-Aspect Ratio Nanogratings for Phase-based X-ray Imaging

Diffractive optical elements such as periodic gratings are fundamental devices in X-ray imaging - a technique that medical, material science and security scans rely upon. Fabrication of such structures with high aspect ratios at the nanoscale creates opportunities to further advance such applications, especially in terms of relaxing X-ray source coherence requirements. This is because typical grating-based X-ray phase imaging techniques (e.g., Talbot self-imaging) require a coherence length of at least one grating period and ideally longer. In this paper, the fabrication challenges in achieving high aspect-ratio nanogratings filled with gold are addressed by a combination of laser interference and nanoimprint lithography, physical vapor deposition, metal assisted chemical etching (MACE), and electroplating. This relatively simple and cost-efficient approach is unlocked by an innovative post-MACE drying step with hexamethyldisilazane, which effectively minimizes the stiction of the nanostructures. The theoretical limits of the approach are discussed and, experimentally, X-ray nanogratings with aspect ratios >40 demonstrated. Finally, their excellent diffractive abilities are shown when exposed to a hard (12.2 keV) monochromatic x-ray beam at a synchrotron facility, and thus potential applicability in phase-based X-ray imaging.Comment: 27 pages, 5 figures in main text, plus supporting informatio

ABCD transfer matrix model of Gaussian beam propagation in Fabry-Perot etalons

A numerical model of Gaussian beam propagation in planar Fabry-Perot (FP) etalons is presented. The model is based on the ABCD transfer matrix method. This method is easy to use and interpret, and readily connects models of lenses, mirrors, fibres and other optics to aid simulating complex multi-component etalon systems. To validate the etalon model, its predictions were verified using a previously validated model based on Fourier optics. To demonstrate its utility, three different etalon systems were simulated. The results suggest the model is valid and versatile and could aid in designing and understanding a range of systems containing planar FP etalons. The method could be extended to model higher order beams, other FP type devices such as plano-concave resonators, and more complex etalon systems such as those involving tilted components

Simulating chemistry efficiently on fault-tolerant quantum computers

Quantum computers can in principle simulate quantum physics exponentially faster than their classical counterparts, but some technical hurdles remain. Here we consider methods to make proposed chemical simulation algorithms computationally fast on fault-tolerant quantum computers in the circuit model. Fault tolerance constrains the choice of available gates, so that arbitrary gates required for a simulation algorithm must be constructed from sequences of fundamental operations. We examine techniques for constructing arbitrary gates which perform substantially faster than circuits based on the conventional Solovay-Kitaev algorithm [C.M. Dawson and M.A. Nielsen, \emph{Quantum Inf. Comput.}, \textbf{6}:81, 2006]. For a given approximation error $\epsilon$, arbitrary single-qubit gates can be produced fault-tolerantly and using a limited set of gates in time which is $O(\log \epsilon)$ or $O(\log \log \epsilon)$; with sufficient parallel preparation of ancillas, constant average depth is possible using a method we call programmable ancilla rotations. Moreover, we construct and analyze efficient implementations of first- and second-quantized simulation algorithms using the fault-tolerant arbitrary gates and other techniques, such as implementing various subroutines in constant time. A specific example we analyze is the ground-state energy calculation for Lithium hydride.Comment: 33 pages, 18 figure

A mechanism for the suppression of homologous recombination in G1 cells

DNA repair by homologous recombination (HR)(1) is highly suppressed in G1 cells(2,3) to ensure that mitotic recombination occurs solely between sister chromatids(4). Although many HR factors are cell cycle-regulated, the identity of the events that are both necessary and sufficient to suppress recombination in G1 cells is unknown. Here we report that the cell cycle controls the interaction of BRCA1 with PALB2-BRCA2 in order to constrain BRCA2 function to the S/G2 phases. We found that the BRCA1-interaction site on PALB2 is targeted by an E3 ubiquitin ligase composed of KEAP1, a PALB2-interacting protein(5), in complex with CUL3-RBX1(6). PALB2 ubiquitylation suppresses its interaction with BRCA1 and is counteracted by the deubiquitylase USP11, which is itself under cell cycle control. Restoration of the BRCA1-PALB2 interaction combined with the activation of DNA end resection is sufficient to induce HR in G1, as measured by RAD51 recruitment, unscheduled DNA synthesis and a CRISPR/Cas9-based gene targeting assay. We conclude that the mechanism prohibiting HR in G1 minimally consists of the suppression of DNA end resection coupled to a multi-step block to BRCA2 recruitment to DNA damage sites that involves the inhibition of BRCA1-PALB2-BRCA2 complex assembly. We speculate that the ability to induce HR in G1 cells with defined factors could spur the development of gene targeting applications in non-dividing cells