Low-field microwave absorption in epitaxial La-Sr-Mn-O films resulting from the angle-tuned ferromagnetic resonance in the multidomain state

We studied magnetic-field induced microwave absorption in 100-200 nm thick La$_{0.7}$Sr$_{0.3}$MnO$_{3}$ films on SrTiO$_{3}$ substrate and found a low-field absorption with a very peculiar angular dependence: it appears only in the oblique field and is absent both in the parallel and in the perpendicular orientations. We demonstrate that this low-field absorption results from the ferromagnetic resonance in the multidomain state (domain-mode resonance). Its unusual angular dependence arises from the interplay between the parallel component of the magnetic field that drives the film into multidomain state and the perpendicular field component that controls the domain width through its effect on domain wall energy. The low-field microwave absorption in the multidomain state can be a tool to probe domain structure in magnetic films with in-plane magnetization.Comment: 9 pages, 9 Figure

Crossover from diffusive to tunneling regime in NbN/DyN/NbN ferromagnetic semiconductor tunnel junctions

We have investigated NbN-DyN-NbN junctions with 1 to 10 nm thick DyN barriers. A crossover from diffusive (hopping) to tunneling-type transport was found in these junctions as the DyN thickness is reduced below ∼4 nm. We have also made a detailed study of magnetic and electrical properties of thicker DyN thin films deposited under similar conditions; DyN films were found to be ferromagnetic with TCurie∼35±5 K. Electrical transport of the junctions with ∼10 nm DyN was understood in terms of Shklovskii-Efros (SE)-type variable range hopping (VRH) at low temperature between 90 and 35 K. We estimated localization length ξ=5.6 nm in this temperature range. Temperature dependence of resistance was found to deviate from SE-VRH below 35 K along with large suppression of resistance with magnetic field. This is correlated with onset of magnetism below 35 K. Large butterfly-shaped MR up to ∼40% was found for the ∼10 nm thick DyN junction at 2 K. In the tunneling regime, barrier height of the tunnel junction was estimated ∼50 meV from the Simmons model. Signatures of spin filtering was found in temperature dependence of resistance in tunnel junction with ∼3 nm thick DyN. Cooper pair tunneling in these junctions below TC (∼10.8 K) of NbN was understood according to S-I-S tunneling current model. We found coherent tunneling of Cooper pairs through a ∼1 nm thick DyN tunnel barrier with critical current IC∼12 μA. The critical current also showed modulation with magnetic field.This work was supported by the ERC Advanced Investigator Grant SUPERSPIN.This is the accepted version of the article. The final version is published in Physical Review B: http://journals.aps.org/prb/abstract/10.1103/PhysRevB.89.094414. ©American Physical Societ

Spin wave resonances in La_{0.7}Sr_{0.3}MnO_{3} films: measurement of spin wave stiffness and anisotropy field

We studied magnetic field dependent microwave absorption in epitaxial La$_{0.7}$Sr$_{0.3}$MnO$_{3}$ films using an X-band Bruker ESR spectrometer. By analyzing angular and temperature dependence of the ferromagnetic and spin-wave resonances we determine spin-wave stiffness and anisotropy field. The spin-wave stiffness as found from the spectrum of the standing spin-wave resonances in thin films is in fair agreement with the results of inelastic neutron scattering studies on a single crystal of the same composition [Vasiliu-Doloc et al., J. Appl. Phys. \textbf{83}, 7343 (1998)].Comment: 15 pages, 7 figures (now figure captions are included

Nonresonant microwave absorption in epitaxial La-Sr-Mn-O films and its relation to colossal magnetoresistance

We study magnetic-field-dependent nonresonant microwave absorption and dispersion in thin La$_{0.7}$Sr$_{0.3}$MnO$_{3}$ films and show that it originates from the colossal magnetoresistance. We develop the model for magnetoresistance of a thin ferromagnetic film in oblique magnetic field. The model accounts fairly well for our experimental findings, as well as for results of other researchers. We demonstrate that nonresonant microwave absorption is a powerful technique that allows contactless measurement of magnetic properties of thin films, including magnetoresistance, anisotropy field and coercive field.Comment: 20 pages, 11 figure

A high-speed single sideband generator using a magnetic tunnel junction spin torque nano-oscillator

An important property of spin-torque nano-oscillators (STNOs) is their ability to produce a frequency modulated (FM) signal, which is very critical for communication applications. We here demonstrate a novel single sideband (SSB) modulation phenomenon using a magnetic tunnel junction (MTJ)-based STNO, which saves transmission bandwidth and in principle should minimize attenuation for wireless communication. Experimentally, lower single sidebands (LSSBs) have been successfully demonstrated over a wide range of modulation frequency, f m  = 150 MHz-1 GHz. The observed LSSBs are determined by the intrinsic properties of the device, which can be modeled well by a nonlinear frequency and amplitude modulation formulation and reproduced in macrospin simulations. Moreover, our macrospin simulation results show that the range of modulation current and modulation frequency for generating SSBs can be controlled by the field-like torque and biasing conditions

Magnetic droplet solitons in orthogonal nano-contact spin torque oscillators

We study microwave signal generation as a function of drive current and applied perpendicular magnetic field in nano-contact spin torque oscillators (NC-STOs) based on orthogonal (pseudo) spin valves where the Co fixed layer has strong easy-plane anisotropy, and the [Co/Ni] free layer has a strong perpendicular magnetic anisotropy. The orthogonal NC-STOs exhibit a dramatic transition from the conventional ferromagnetic resonance-like spin wave mode to a magnetic droplet soliton mode. In particular, the field and current dependence of the droplet soliton near threshold are discussed. Near threshold the droplet soliton undergoes complex dynamics that include mode hopping, as evident in the experimental frequency domain and magnetoresistance response

Spin transfer torque generated magnetic droplet solitons (invited)

We present recent experimental and numerical advancements in the understanding of spin transfer torque generated magnetic droplet solitons. The experimental work focuses on nano-contact spin torque oscillators (NC-STOs) based on orthogonal (pseudo) spin valves where the Co fixed layer has an easy-plane anisotropy, and the [Co/Ni] free layer has a strong perpendicular magnetic anisotropy. The NC-STO resistance and microwave signal generation are measured simultaneously as a function of drive current and applied perpendicular magnetic field. Both exhibit dramatic transitions at a certain current dependent critical field value, where the microwave frequency drops 10 GHz, modulation sidebands appear, and the resistance exhibits a jump, while the magnetoresistance changes sign. We interpret these observations as the nucleation of a magnetic droplet soliton with a large fraction of its magnetization processing with an angle greater than 90°, i.e., around a direction opposite that of the applied field. This interpretation is corroborated by numerical simulations. When the field is further increased, we find that the droplet eventually collapses under the pressure from the Zeeman energy

Continuous harvest of stem cells via partial detachment from thermoresponsive nanobrush surfaces

Stem cell culture is typically based on batch-type culture, which is laborious and expensive. Here, we propose a continuous harvest method for stem cells cultured on thermoresponsive nanobrush surfaces. In this method, stem cells are partially detached from the nanobrush surface by reducing the temperature of the culture medium below the critical solution temperature needed for thermoresponse. The detached stem cells are harvested by exchange into fresh culture medium. Following this, the remaining cells are continuously cultured by expansion in fresh culture medium at 37 °C. Thermoresponsive nanobrush surfaces were prepared by coating block copolymers containing polystyrene (for hydrophobic anchoring onto culture dishes) with three types of polymers: (a) polyacrylic acid with cell-binding oligopeptides, (b) thermoresponsive poly-N-isopropylacrylamide, and (c) hydrophilic poly(ethyleneglycol)methacrylate. The optimal coating durations and compositions for these copolymers to facilitate adequate attachment and detachment of human adipose-derived stem cells (hADSCs) and embryonic stem cells (hESCs) were determined. hADSCs and hESCs were continuously harvested for 5 and 3 cycles, respectively, via the partial detachment of cells from thermoresponsive nanobrush surfaces

Visualisation of stabilising particles at the gas solid interface of metal foams

In this article, we demonstrate a technique to visualise the stabilising particles at the gas solid interface of metal foams by employing metallographic etching. This technique is easy to perform and can be applied on a relatively large sample size. The particles present at the gas solid interface of five different types of foams were investigated. Information on the type of particles and the particle coverage could be obtained from this stud