Conditions for free magnetic monopoles in nanoscale square arrays of dipolar spin ice

We study a modified frustrated dipolar array recently proposed by M\"{o}ller and Moessner [Phys. Rev. Lett. \textbf{96}, 237202 (2006)], which is based on an array manufactured lithographically by Wang \emph{et al.} [Nature (London) \textbf{439}, 303 (2006)] and consists of introducing a height offset $h$ between islands (dipoles) pointing along the two different lattice directions. The ground-states and excitations are studied as a function of $h$. We have found, in qualitative agreement with the results of M\"{o}ller and Moessner, that the ground-state changes for $h>h_{1}$, where $h_{1}= 0.444a$ ($a$ is the lattice parameter or distance between islands). In addition, the excitations above the ground-state behave like magnetic poles but confined by a string, whose tension decreases as $h$ increases, in such a way that for $h\approx h_1$ its value is around 20 times smaller than that for $h=0$. The system exhibits an anisotropy in the sense that the string tension and magnetic charge depends significantly on the directions in which the monopoles are separated. In turn, the intensity of the magnetic charge abruptly changes when the monopoles are separated along the direction of the longest axis of the islands. Such a gap is attributed to the transition from the anti to the ferromagnetic ground-state when $h=h_1$.Comment: 6 pages, 7 figures. Published versio

A new data reduction scheme to obtain the mode II fracture properties of Pinus Pinaster wood

In this work a numerical study of the End Notched Flexure (ENF) specimen was performed in order to obtain the mode II critical strain energy released rate (GIIc) of a Pinus pinaster wood in the RL crack propagation system. The analysis included interface finite elements and a progressive damage model based on indirect use of Fracture Mechanics. The difficulties in monitoring the crack length during an experimental ENF test and the inconvenience of performing separate tests in order to obtain the elastic properties are well known. To avoid these problems, a new data reduction scheme based on the equivalent crack concept was proposed and validated. This new data reduction scheme, the Compliance-Based Beam Method (CBBM), does not require crack measurements during ENF tests and additional tests to obtain elastic properties.FCT - POCTI/EME/45573/200

Finite element analysis of the ECT test on mode III interlaminar fracture of carbon-epoxy composite laminates

In this work a parametric study of the Edge Crack Torsion (ECT) specimen was performed in order to maximize the mode III component (GIII) of the strain energy release rate for carbon-epoxy laminates. A three-dimensional finite element analysis of the ECT test was conducted considering a [90/0/(+45/-45)2/(-45/+45)2/0/90]S lay-up. The main objective was to define an adequate geometry to obtain an almost pure mode III at crack front. The geometrical parameters studied were specimen dimensions, distance between pins and size of the initial crack. The numerical results demonstrated that the ratio between the specimen length and the initial crack length had a significant effect on the strain energy release rate distributions. In almost all of the tested configurations, a mode II component occurred near the edges but it did not interfere significantly with the dominant mode III state.FCT - POCTI/EME/45573/200