Preparation of Fabric Sensor for Heart Signal Acquisition Using Printing and Electroless Plating of Copper on Polyester Fabric

In the last decade, a significant progress has been made in the wearable medical devices. Scientists are extensively involved in the design of the flexible instruments equipped with garments to fulfill the daily needs and requirements. The fulfillment of this demand particularly needs a conductive fabric substrate with a high level of homogeneity, and the lowest barrier against electrical current. In this study, textile based ECG electrode was prepared by screen printing of activator followed by electroless plating of copper particles. The data acquisition showed the best outcome with pH=8.5 and the plating temperature of 70 ˚C. The electrical resistance showed a range around 0.08 Ω/sq, which sounds quite proper for ECG signal acquisition since the potential difference according to heart activity on skin surface is in milivolt range. We tested the cardiac signal with a reference electrode of Electroshock monitoring system and the results revealed a very high quality receiving signal. Employing of these types of sensors in textile surface due to their flexibility can bring the users more freedom of action

Bilayer Cylindrical Conduit Consisting of Electrospun Polycaprolactone Nanofibers and DSC Cross-Linked Sodium Alginate Hydrogel to Bridge Peripheral Nerve Gaps

Herein, a bilayer cylindrical conduit (P-CA) is presented consisting of electrospun polycaprolactone (PCL) nanofibers and sodium alginate hydrogel covalently cross-linked with N,N�-disuccinimidyl carbonate (DSC). The bilayer P-CA conduit is developed by combining the electrospinning and outer�inner layer methods. Using DSC, as a covalent crosslinker, increases the degradation time of the sodium alginate hydrogel up to 2 months. The swelling ratio of the hydrogel is also 503 during the first 8 h. The DSC cross-linked sodium alginate in the inner layer of the conduit promotes the adhesion and proliferation of nerve cells, while the electrospun PCL nanofibers in the outer layer provide maximum tensile strength of the conduit during surgery. P-CA conduit promotes the migration of Schwann cells along the axon in a rat model based on functional and histological evidences. In conclusion, P-CA conduit will be a promising construct for repairing sciatic nerves in a rat model. © 2020 WILEY-VCH Verlag GmbH & Co. KGaA, Weinhei

Sustainable Release of Vancomycin from Silk Fibroin Nanoparticles for Treating Severe Bone Infection in Rat Tibia Osteomyelitis Model

The successful treatment of bone infections is a major challenge in the field of orthopedics. There are some common methods for treating bone infections, including systemic antibiotic administration, local nondegradable drug vehicles, and surgical debridement, and each of these approaches has advantages and disadvantages. In the present study, the antibiotic vancomycin (VANCO) was loaded in silk fibroin nanoparticles (SFNPs) and the complexes were then entrapped in silk scaffolds to form sustained drug delivery systems. The release kinetics of VANCO from SFNPs alone and when the SFNPs were entrapped in silk scaffolds were assessed at two different pH values, 4.5 and 7.4, that affected the release profiles of VANCO. Disk diffusion tests performed with pathogens causing osteomyelitis methicillin-resistant Staphylococcus aureus(MRSA) showed antibacterial activity of the released drug at two different pH values. Additionally, injection of 8 à 106 CFU MRSA in ratâ s tibia induced severe osteomyelitis disease. Radiographic and histopathological analyses were performed to evaluate the effectiveness of treatment after 6 weeks. The VANCO-loaded silk fibroin nanoparticles entrapped in scaffolds reduced bone infections at the defected site with better outcomes than the other treatment groups. In conclusion, the delivery system with good biocompatibility and sustained release properties would be appropriate for further study in the context of osteomyelitis disease.Iran National Science Foundation (INSF) grant number 93030058 and was approved by the Pasteur Institute of Iraninfo:eu-repo/semantics/publishedVersio

Porous crosslinked poly(e-caprolactone fumarate)/nanohydroxyapatite composites for bone tissue engineering

Porous nanocomposites based on poly(e-caprolactone fumarate) (PCLF) resin matrix; N-vinyl pyrrolidone (NVP) as a reactive diluents and nanohydroxyapatite (nHA) filler were developed for bone tissue engineering applications. Nanocomposite scaffolds with three different contents of nHA [5, 10, and 20 (w/w %)] were prepared by thermal crosslinking of PCLF followed by particulate leaching and characterized in terms of mechanical properties (cyclic loading) and in vitro cell-material interaction by MTT assay and alkaline phosphatase activity measurements. Five osteoblastic cell lines were used to investigate the ability of the nanocomposites to support cell attachment, spreading, and proliferation after 3, 7, and 14 days. By adding the nHA filler phase, elastic modulus of the nanocomposites increased significantly. Scaffolds showed comparable biocompatibility to neat nHA particles, commercial bone graft (Bio-Oss) and tissue culture polystyrene as control groups. According to the results it can be concluded that these scaffolds are potential candidates for bone substitution because of their mechanical strength and bioactivity. (C) 2012 Wiley Periodicals, Inc. J Biomed Mater Res Part A:, 2012

Agarose-based biomaterials for advanced drug delivery

Agarose is a prominent marine polysaccharide representing reversible thermogelling behavior, outstanding mechanical properties, high bioactivity, and switchable chemical reactivity for functionalization. As a result, agarose has received particular attention in the fabrication of advanced delivery systems as sophisticated carriers for therapeutic agents. The ever-growing use of agarose-based biomaterials for drug delivery systems resulted in rapid growth in the number of related publications, however still, a long way should be paved to achieve FDA approval for most of the proposed products. This review aims at a classification of agarose-based biomaterials and their derivatives applicable for controlled/targeted drug delivery purposes. Moreover, it attempts to deal with opportunities and challenges associated with the future developments ahead of agarose-based biomaterials in the realm of advanced drug delivery. Undoubtedly, this class of biomaterials needs further advancement, and a lot of critical questions have yet to be answered. © 202

Gold nanorods reinforced silk fibroin nanocomposite for peripheral nerve tissue engineering applications

Nowadays, regenerating peripheral nerves injuries (PNIs) remain a major clinical challenge, which has gained a great attention between scientists. Here, we represent a nanocomposite based on silk fibroin reinforced gold nanorods (SF/GNRs) to evaluate the proliferation and attachment of PC12 cells. The morphological characterization of nanocomposites with transmission electron microscopy (TEM) and Scanning electron microscopy (SEM) showed that the fabricated scaffolds have porous structure with interconnected pores that is suitable for cell adhesion and growth. GNRs significantly improved the poor electrical conductivity of bulk silk fibroin scaffold. Evaluating the morphology of PC12 cells on the scaffold also confirmed the normal morphology of cells with good rate of adhesion. SF/GNRs nanocomposites showed better cellular attachment, growth and proliferation without any toxicity compared with bulk SF scaffold. Moreover, immunostaining studies represented the overexpression of neural specific proteins like nestin and neuron specific enolase (NSE) in the cells cultured on SF/GNRs nanocomposites in comparison to neat SF scaffolds. © 2019 Elsevier B.V