21,581 research outputs found
On Krein-like theorems for noncanonical Hamiltonian systems with continuous spectra: application to Vlasov-Poisson
The notions of spectral stability and the spectrum for the Vlasov-Poisson
system linearized about homogeneous equilibria, f_0(v), are reviewed.
Structural stability is reviewed and applied to perturbations of the linearized
Vlasov operator through perturbations of f_0. We prove that for each f_0 there
is an arbitrarily small delta f_0' in W^{1,1}(R) such that f_0+delta f_0f_0$ is perturbed by an area preserving rearrangement, f_0 will
always be stable if the continuous spectrum is only of positive signature,
where the signature of the continuous spectrum is defined as in previous work.
If there is a signature change, then there is a rearrangement of f_0 that is
unstable and arbitrarily close to f_0 with f_0' in W^{1,1}. This result is
analogous to Krein's theorem for the continuous spectrum. We prove that if a
discrete mode embedded in the continuous spectrum is surrounded by the opposite
signature there is an infinitesimal perturbation in C^n norm that makes f_0
unstable. If f_0 is stable we prove that the signature of every discrete mode
is the opposite of the continuum surrounding it.Comment: Submitted to the journal Transport Theory and Statistical Physics. 36
pages, 12 figure
Reynolds number dependence of streamwise velocity spectra in turbulent pipe flow
Spectra of the streamwise velocity component in fully developed turbulent pipe flow are presented for Reynolds numbers up to 5.7×10^6. Even at the highest Reynolds number, streamwise velocity spectra exhibit incomplete similarity only: while spectra collapse with both classical inner and outer scaling for limited ranges of wave number, these ranges do not overlap. Thus similarity may not be described as complete, and a region varying with the inverse of the streamwise wave number, k1, is not expected, and any apparent k1-1 range does not attract any special significance and does not involve a universal constant. Reasons for this are suggested
Scaling of the streamwise velocity component in turbulent pipe flow
Statistics of the streamwise velocity component in fully developed pipe flow are examined for Reynolds numbers in the range 5.5 x 10^4 ≤ ReD ≤ 5.7 x 10^6. Probability density functions and their moments (up to sixth order) are presented and their scaling with Reynolds number is assessed. The second moment exhibits two maxima: the one in the viscous sublayer is Reynolds-number dependent while the other, near the lower edge of the log region, follows approximately the peak in Reynolds shear stress. Its locus has an approximate (R^+)^{0.5} dependence. This peak shows no sign of ‘saturation’, increasing indefinitely with Reynolds number. Scalings of the moments with wall friction velocity and are examined and the latter is shown to be a better velocity scale for the outer region, y/R > 0.35, but in two distinct Reynolds-number ranges, one when ReD 7 x 10^4. Probability density functions do not show any universal behaviour, their higher moments showing small variations with distance from the wall outside the viscous sublayer. They are most nearly Gaussian in the overlap region. Their departures from Gaussian are assessed by examining the behaviour of the higher moments as functions of the lower ones. Spectra and the second moment are compared with empirical and theoretical scaling laws and some anomalies are apparent. In particular, even at the highest Reynolds number, the spectrum does not show a self-similar range of wavenumbers in which the spectral density is proportional to the inverse streamwise wavenumber. Thus such a range does not attract any special significance and does not involve a universal constant
Further observations on the mean velocity distribution in fully developed pipe flow
The measurements by Zagarola & Smits (1998) of mean velocity profiles in fully developed turbulent pipe flow are repeated using a smaller Pitot probe to reduce the uncertainties due to velocity gradient corrections. A new static pressure correction (McKeon & Smits 2002) is used in analysing all data and leads to significant differences from the Zagarola & Smits conclusions. The results confirm the presence of a power-law region near the wall and, for Reynolds numbers greater than 230×10^3 (R+ >5×10^3), a logarithmic region further out, but the limits of these regions and some of the constants differ from those reported by Zagarola & Smits. In particular, the log law is found for 600<y+ <0.12R+ (instead of 600<y+ <0.07R+), and the von Kármán constant κ, the additive constant B for the log law using inner flow scaling, and the additive constant B∗ for the log law using outer scaling are found to be 0.421 ± 0.002, 5.60 ± 0.08 and 1.20 ± 0.10, respectively, with 95% confidence level (compared with 0.436±0.002, 6.15±0.08, and 1.51±0.03 found by Zagarola & Smits). The data also confirm that the pipe flow data for ReD ≤ 13.6×10^6 (as a minimum) are not affected by surface roughness
Exactly Conservative Integrators
Traditional numerical discretizations of conservative systems generically
yield an artificial secular drift of any nonlinear invariants. In this work we
present an explicit nontraditional algorithm that exactly conserves these
invariants. We illustrate the general method by applying it to the three-wave
truncation of the Euler equations, the Lotka--Volterra predator--prey model,
and the Kepler problem. This method is discussed in the context of symplectic
(phase space conserving) integration methods as well as nonsymplectic
conservative methods. We comment on the application of our method to general
conservative systems.Comment: 30 pages, postscript (1.3MB). Submitted to SIAM J. Sci. Comput
The response of hot wires in high Reynolds-number turbulent pipe flow
Issues concerning the accuracy of hot-wire measurements in turbulent pipe flow are addressed for pipe Reynolds numbers up to 6 × 106 and hot-wire Reynolds numbers up to Rew ap 250. These include the optimization of spatial and temporal resolution and the associated feature of signal-to-noise ratio. Very high wire Reynolds numbers enable the use of wires with reduced length-to-diameter ratios compared to those typical of atmospheric conditions owing to increased wire Nusselt numbers. Simulation of the steady-state heat balance for the wire and the unetched portion of wire are used to assess static end-conduction effects: they are used to calculate wire Biot numbers, \sqrt{c_0}l , and fractional end-conduction losses, σ, which confirm the 'conduction-only' theory described by Corrsin. They show that, at Rew ap 250, the wire length-to-diameter ratio can be reduced to about 50, while keeping \sqrt{c_0}l\gt3 and σ < 7% in common with accepted limits at Rew ap 3. It is shown that these limits depend additionally on the choice of wire material and the length of unetched wire. The dynamic effects of end-cooling are also assessed using the conduction-only theory
Two-colour QCD at non-zero quark-number density
We have simulated two-colour four-flavour QCD at non-zero chemical potential
for quark number. Simulations were performed on and lattices. Clear evidence was seen for the formation of a colourless diquark
condensate which breaks quark number spontaneously, for . The transition appears to be second order. We have measured the
spectrum of scalar and pseudoscalar bosons which shows clear evidence for the
expected Goldstone boson. Our results are in qualitative agreement with those
from effective Lagrangians for the potential Goldstone excitations of this
theory.Comment: 22 pages RevTeX, 6 figures in 10 postscript file
Bringing remote sensing technology to the user community
The procedures and services available for educating and training potential users of remote sensing technology are discussed along with approaches for achieving an in-house capability for the analysis of remotely sensed data using numerical techniques based on pattern recognition principles. Cost estimates are provided where appropriate
- …